Stroj za brušenje jekla

GREIF DHL-1-1-KT

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Redpet Hxamsfx Abhjn Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Rsdpjqzkdmofx Abhon

Stanje: dober (rabljeno), Višina konic: 195 mm Razdalja med konicama: 1250 mm Maks. premer obdelave nad posteljo/vozičkom: 400/265 mm Vreteno/vrtina vretena: Camlock D1-6"/54 mm Stožec konjička: MK 5 Obrati vretena v 3 skupinah, brezstopenjsko nastavljivi: 0 - 2500 o/min Vzdolžni pomiki: 0,018 - 1,2 mm Prečni pomiki: 1/2 vzdolžnih pomikov 51 metričnih navojev: 0,2 - 14 mm Rsdpfxjxlg Dws Abhon 56 colskih navojev: 2 - 56 navojev/" 20 modulnih navojev: 0,2 - 3,5 modul 20 diametral pitch navojev: 8 - 56 DP Električni priklop: 400 V, 7,5 kW Teža: 1500 kg Dimenzije: 2500 x 1300 x 1300 mm

Stanje: zelo dobro (rabljeno), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided. Rjdpfxju Hanyj Abhon

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Rodjfxyhfepfx Abhsn Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 1, dolžina brušenja: 1.000 mm, širina brušenja: 600 mm, Horizontal Surface Grinding Machine Geibel & Hotz FS 1050 SD Grinding area: 1000 x 600 mm Fine-pole magnetic chuck Numerous flanges and wheels Large paper band filter Adjustable levelling feet Wiring diagram & circuit diagram Balancing scale The machine was used a maximum of 2 days per week – not used for serial production. Rsdpev U Dfusfx Abhen Price: ex works – unpacked – uninsured Availability: immediately – subject to prior sale Errors excepted – technical data non-binding

Leto izdelave: 1978, Stanje: rabljeno, številka stroja/vozila: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Redpsbx Eliefx Abhon Table size: AT-F 205 x 345 mm Space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (approx. 1/3 loss of power at 380 V), 0.6 kW accordingly

Stanje: dober (rabljeno), Leto izdelave: 1988, dolžina brušenja: 1.000 mm, širina brušenja: 550 mm, višina brušenja: 400 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Availability: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electric straight dressing device with compensation Vertical digital readout Mount for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Adjustment wedges Rjdpfou Rqynex Abhen Coolant system with universal paper band filter Complete documentation

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Redpfou Hag Nex Abhon Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stanje: dober (rabljeno), Leto izdelave: 1990, From company closure: Mössner Rekord SSF 520 Year of manufacture: 1990 Serial no.: 27968 Infinitely variable speed from 15 to 2350 m/min 4 gearbox speeds Bandsaw welding unit BSSO25 Air pump Work light Grinding wheel Rjdpfjviym Djx Abhen Table tiltable left 15° - right 45° Table size: 790 x 740 mm Vertical clearance: 390 mm / Horizontal clearance: 500 mm Machine height: 2100 mm Weight: approx. 700 kg