Prikolica z nizko platformo

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen/ausziehbar

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Hodpsz N Nrdofx Anpjw Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Cambio Debarker 54. Če vas zanima nakup, smo odprti za pogovor o ceni. Hedpfoww A E Rsx Anpjw

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Hsdpfjz N Nrkjx Anpsw Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter Hedpfx Ajz N Nq Honpjw 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Komplet 5 novih, neuporabljenih bagrov na gosenicah ZoomLion ZE27GU. Hodpfjzwv Hljx Anpjw

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h Hodpjz N Nrqsfx Anpow 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter Hsdpfx Asz N Np Nenpsw 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: rabljeno, številka stroja/vozila: 2904, prevoženi kilometri: 22.488 km, prva registracija: 01/1990, vrsta goriva: dizel, lastna masa: 18.143 kg, skupna masa: 31.751 kg, barva: zelen, voznikova kabina: drugo, vrsta prenosa: drugo, vzmetenje: jeklo, Leto izdelave: 1990, Oshkosh A/S32 R11 Tankfahrzeug, 6.000 Gallonen Tank Cummins 6-Zylinder-Turbodieselmotor, 8,3 Liter Hsdpszk Icljfx Anpow Pumpleistung: 600 GPM Betankung über Flügel- und Unterflügelanschlüsse Tank, Leitungen und Filterabscheider wurden gespült; das Fahrzeug ist sofort einsatzbereit. Fahrzeug fahrbereit. 6.000 Gallonen (ca. 22.712 Liter) Fassungsvermögen, Tank, Leitungen und Filter wurden gespült. Der Preis gilt für den aktuellen Zustand; mit TÜV und Zulassung kostet das Fahrzeug 30.000 € netto. Mehrere Fahrzeuge mit unterschiedlichen Laufleistungen verfügbar. Bitte vereinbaren Sie stets einen Besichtigungstermin mit uns.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Hedpfsz N Nqmjx Anpjw Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hsdoz N Nqaepfx Anpew Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Hjdeyq Rdyepfx Anpew Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please send inquiries or offers by email only, not by phone.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Hjdpjz N Npvsfx Anpow Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.