Vakuumsko dvigalo

GGR MRT411LDC30

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.304 h, Funkcionalnost: popolnoma funkcionalen, Base Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, approved for road use up to 80 km/h Braking system incl. ABS and lighting compliant with EC Directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection, 20 l/min Load-dependent control of feed material including automatic reversing scraper floor Separate drives for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 litres Feed roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally arranged lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is stopped 24V electrical control system Separate control box at the rear of the machine Hydraulically foldable Multimesh fine shredding basket (mesh size from 30 - 280 mm, gradation available on request) incl. one-piece rear flap Rear conveyor: length 7,500 mm, width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. antimagnetic centre section Underscreen conveyor: length 3,800 mm, width 1,400 mm Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Optional Equipment: Hydrostatic drive Scraper floor chain lubrication NEODYM overband magnet Bljdpoxx Tigjfx Altjk Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: Engine compartment and rear conveyor Watering system Delivery date by arrangement Available from 06/2026

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm Bljdpfx Aloirax Ujtsk -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Leto izdelave: 2026, Komplett automatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit bedienerfreundlicher Automatisierung. Legen Sie einfach ein Aluminiumprofil auf, die Maschine erkennt dieses automatisch und schneidet es positionsgenau durch servomotorische Materialzuführung in die zuvor definierten Aufträge. Schneidlisten können per Excel-Jobliste und WIFI sehr einfach und effizient eingespielt werden – ideal zur Verarbeitung großer Stücklisten. Für jedes zu schneidende Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die exakte Länge. Unser leistungsfähiger Optimierungsalgorithmus berechnet in Echtzeit die optimale Schnittreihenfolge zur Minimierung des Materialverschnitts. Die Maschine führt die berechnete Schnittliste vollautomatisch und ohne Unterbrechung aus. Es sind keine weiteren Eingaben oder Bedienhandlungen notwendig – legen Sie einfach das nächste Profil ein. Einfaches, schnelles Alternativsystem zu klassischen Doppelgehrungssägen. Geben Sie nur die gewünschten Längen und Winkel ein oder importieren Sie diese, und starten Sie den automatisierten Schneidprozess. Die Maschine fertigt Ihre Gehrungsteile kontinuierlich, hochpräzise und mit hoher Geschwindigkeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den automatischen Betrieb, Auftrag eingeben und in Sekunden starten • Vereinfachte Bearbeitung von Einzelteilen, Batches oder umfangreichen Excel-Stücklisten • Bündel-/Mehrfachprofilzuschnitt mit automatischer Stückzählung • Ferneingabe von Excel-Joblisten per WIFI inklusive umfangreicher Datenzuordnung • Komplett einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Prozessproduktivität • Automatischer Optimiermodus mit Laserlängenmessung und Verschnittminimierung (optional) • Automatische Etikettierung der Zuschnitte anhand der Jobdaten (Etikettenanbringung manuell, optional) • Online-Direktdruck der Teilebezeichnung direkt auf das Material ohne Bedienereingriff (optional) • Barcodes oder QR-Codes zum Drucken oder Scannen bei der Auftragseingabe (optional) • Automatische servo-gesteuerte Positionierung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Fenster- und Türenfertigung • Herstellung von auf Gehrung gearbeiteten Aluminiumkonstruktionen • Herstellung von Aluminium-Bauteilen • Composite-Fertigung • Herstellung von Jalousien, Beschattungselementen und Möbeln • Aluminiumhandel und Einzelverkauf Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkapazität: 20 – 40 kg Software: Optimiser Blsdpfxsf Ekn Dj Altok QUALITÄT AUS AUSTRALIEN – MADE IN AUSTRALIA.

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Bodswwtylepfx Altelk Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Bljdpfxswwtw Dj Altsk Dodatne tehnične specifikacije na zahtevo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, Tip: KQ 14/38-2,5 Sejalna površina: 1.400 x 3.800 mm brez sejalnih premazov vključno z električnim motorjem 15 kW z novo pol-mobilno jekleno konstrukcijo in novimi iztočnimi žlebovi Bledpfx Alotgpf Hstek

Leto izdelave: 2014, stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, The machine has been out of use for several years and therefore requires maintenance before being put into operation, which will be the responsibility of the buyer. Bledpfjtu U Ebsx Altsk

Stanje: rabljeno, Double-head mitre saw – FOM ALVA 450 B Professional double-head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Widia-tipped blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct drive: motor to widia blade Blade shaft diameter: Ø 32 mm Head tilting: 90° Bledoyylikjpfx Altok   45° outward   22.5° outward   Intermediate angles via mechanical stops and reading on graduated vernier First head fixed Second head movable: automatic positioning with optional manual mode Movable head automatic positioning speed: 12 m/min Movable head positioning accuracy: +/- 0.1 mm Minimum cutting length between heads: 300 mm (reducible by optional program) Maximum cutting length between heads: 4000 mm Hydropneumatic widia blade feed (adjustable feed speed – rapid return) Separate electric control panel from pneumatic system Dual servo-controlled operating pressure at low pressure Air consumption per working cycle: 28 normal litres Vertical and horizontal pneumatic clamps Misted lubrication of the cutting area Provision for chip and fume extraction (1) Operating pressure: 7 bar (adjustable) Mobile head roller conveyor (3 m) Machine in working condition.

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 710 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor na gosenicah brez drobilnega sistema - Gosenicno podvozje z vključenima 2 voznima hitrostma - Veriga podvozja 400 mm, 3-rebri - Dodatni hidravlični priključek 70 l/min - 24-V električno upravljanje - Velik kompletni radijski daljinski upravljalnik - Uporabniku prijazen motornik prostor z LED osvetlitvijo - Zložni lijak s potnim senzorjem in avtomatskim upravljanjem - Hidravlično reverzibilno ventilatorsko kolo - Akustično opozorilo ob zagonu - Barva: RAL 2011 globoko oranžna Posebna oprema: Drobilni sistem velikost L (8 zob) Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadpasovni magnet Bsdpfevrz Rvjx Altslk Nadpasovni magnet Namakalni sistem

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal Bljdpfxsuiy Hre Altjk - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel