Varilna miza
GERD WOLFF 4000 x 2000 x 200

Name: GERD WOLFF 4000 x 2000 x 200
Brand: GERD WOLFF
Availability: InStock

Leto izdelave

2023

Stanje

Novo

Lokacija

Ennepetal

Varilna miza GERD WOLFF 4000 x 2000 x 200

Prikaži karto

Podatki o stroju

Opis stroja:: Varilna miza

Proizvajalec:: GERD WOLFF

Model:: 4000 x 2000 x 200

Leto izdelave:: 2023

Stanje:: novo

Cena in lokacija

Lokacija:: Scharpenbergerstr. 96-98, 58256 Ennepetal, Deutschland

Klic

Tehnične podrobnosti

Skupna višina:: 860 mm

Skupna dolžina:: 4.000 mm

Skupna širina:: 2.000 mm

Skupna masa:: 2.400 kg

Podrobnosti ponudbe

ID ponudbe:: A16196689

Št. reference:: 2065-SL1005

Nazadnje posodobljeno:: dne 19.01.2025

Opis

Manufacturer: GERD WOLFF

Technical Details:
• Length: 4000 mm
• Width: 2000 mm
• Height: 200 mm
• Weight: 2400 kg
• Bore diameter: 28 mm
• Bore spacing: 100 mm

Advantages and Features

• 3-day gas nitriding process
• Increased corrosion resistance
• Spatter adhesion protection
• Maximum load capacity
• Increased fatigue strength
• Enhanced vibration resistance
• Precision fine scaling
• Reinforced by weld seams and ribs on the underside
• Optimal working height: 820–865 mm
• 8x height-adjustable leveling legs
• Optional matching accessory set available

Our welding tables are manufactured from high-grade HT 300 cast iron and are nitrided as a whole after machining.

Additionally, each table features a precise fine scale, engraved using advanced laser technology.

To ensure optimal stability, our welding tables are reinforced with weld seams and structural ribs on the underside (see images).

Furthermore, they undergo a 3-day gas nitriding process, which significantly enhances not only corrosion resistance but also fatigue and vibration strength.

All tables are equipped with adjustable legs with a minimum adjustment range of 620 mm and a maximum of 665 mm, providing a variable working height from 820 to 865 mm.

Other available sizes:
• 1000 x 1000 x 200
• 2000 x 1000 x 200
• 1200 x 1200 x 200
• 1500 x 1000 x 200
• 1500 x 1500 x 200
• 1500 x 2000 x 200
• 2000 x 3000 x 200
• 3000 x 1500 x 200
• 3000 x 2000 x 200
• 4000 x 2000 x 200
• 2400 x 1200 x 200

Images do not reflect the actual size and are for illustration purposes only.

Our welding tables for our sales brand "GERD WOLFF Maschinenfabrik" are manufactured by a renowned producer.

3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Manufacturer: GERD WOLFF

Technical Details:
• Length: 1000 mm
• Width: 1000 mm
• Height: 200 mm
• Weight: 300 kg
• Bore diameter: 28 mm
Ljdpfx Abstrlcvsbohb
• Bore spacing: 100 mm

Advantages and Features

• 3-day gas nitriding process
• Increased corrosion resistance
• Spatter adhesion protection
• Maximum load capacity
• Increased fatigue strength
• Enhanced vibration resistance
• Precision fine scaling
• Reinforced by weld seams and ribs on the underside
• Optimal working height: 820–865 mm
• 4x height-adjustable leveling legs
• Optional matching accessory set available

Our welding tables are manufactured from high-grade HT 300 cast iron and are nitrided as a whole after machining.

Additionally, each table features a precise fine scale, engraved using advanced laser technology.

To ensure optimal stability, our welding tables are reinforced with weld seams and structural ribs on the underside (see images).

Furthermore, they undergo a 3-day gas nitriding process, which significantly enhances not only corrosion resistance but also fatigue and vibration strength.

All tables are equipped with adjustable legs with a minimum adjustment range of 620 mm and a maximum of 665 mm, providing a variable working height from 820 to 865 mm.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Dokumenti

16196689-01.pdf

Ponudnik

Registriran od: 2007

238 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 2333 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Ennepetal

801 km

Varilna miza
GERD WOLFF4000 x 2000 x 200

Klic

Stanje: novo, Leto izdelave: 2025, Table length: 4000 mm Table width: 2000 mm Table height: 200 mm Weight: 2400 kg Manufacturer: GERD WOLFF Technical Specifications: • Length: 4000 mm • Width: 2000 mm • Height: 200 mm • Weight: 2400 kg • Hole diameter: 28 mm Lodsuia I Njpfx Abbohb • Hole pitch: 100 mm • Plate thickness: 25 mm Benefits and Features: • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion coating against weld spatter • Maximum load capacity • Improved fatigue strength • Enhanced vibration resistance • Precision fine scaling • Reinforcement with weld seams and ribs on the underside • Optimum working height from 820-865 mm • 8 height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured with cast quality grade HT 300 and nitrided as a whole after mechanical processing. Additionally, these tables feature precise fine scaling engraved with laser technology. For guaranteed structural stability, our welding tables are reinforced underneath with welded seams and ribs (see images). Furthermore, these tables undergo a 3-day gas nitriding process, which increases corrosion resistance as well as fatigue and vibration strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This enables a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not correspond to actual size and are for illustration purposes only. Our welding tables are manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer. 3D welding table – 3D clamping fixtures – 3D precision welding table

Poglej podrobnosti

Mali oglas

Miza za vpenjanje SIEGMUND RETRO - 2400 x 1200 - 28

Ahaus

878 km

Miza za vpenjanje
SIEGMUNDRETRO - 2400 x 1200 - 28

Klic

Stanje: novo, Table length 2400 mm Table width 1200 mm Table height (side surface) 200 mm Weight 981 kg Space requirement approx. 2400 x 1200 mm SIEGMUND Authorized Dealer - all items available! !! SPECIAL CAMPAIGN !! SIEGMUND Retro Welding Table 2400x1200x200 incl. accessories SIEGMUND welding table as 25 years ago with plasma nitriding and modern table legs Product Description - High-quality steel S355J2+N + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Borehole Ø 28 mm - Boreholes on surface in 100x100 mm grid - Corners, edges, and bores rounded - Side panel height 200 mm - Boreholes on side panel in diagonal grid - Structure reinforced with ribs - Grid lines enable precise setups Welding tables are standardly equipped with scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion resistant / higher load capacity Features: - 28 mm bore pattern / dimensions 2400 x 1200 x 200 mm - plasma-nitrided version with scale - incl. 4x standard legs - Including accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N Lsdpfxsxflfts Abbshb * 2x 280110.N * 1x 283999

Poglej podrobnosti

Mali oglas

4 zvitki hidravličnega upogibanja DURMA HRB-4 3008

Avstrija

226 km

4 zvitki hidravličnega upogibanja
DURMAHRB-4 3008

Klic

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: Ledjd Ab H Hjpfx Abbjhb • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Poglej podrobnosti

Mali oglas

Courbevoie

1.003 km

Namizni rezkalni stroj
huronRU991

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.066 obr/min, širina mize: 1.000 mm, dolžina mize: 6.100 mm, skupna masa: 19.000 kg, 3-axis Newall digital readout, feed drives with variable speed controller SA 50 head, spindle speeds infinitely variable up to a maximum of 1500 rpm Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Lhjdpfjvz Aydox Abbob Weight: 19 tonnes

Poglej podrobnosti

Mali oglas

Eislingen/Fils

489 km

Merjenje ploščo
RUEBENACHUBK

Klic

Mali oglas

Stroj za odvijanje robov pločevine / stroj za odstranjevanje robov NS Maquinas DM 1100 C

Gemmingen

561 km

Stroj za odvijanje robov pločevine / stroj za odstranjevanje robov
NS MaquinasDM 1100 C

36.500 €

EXW Stalna cena brez DDV

Klic

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Lhodpetzfntefx Abbsb Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Poglej podrobnosti

Mali oglas

Gramofonska miza Nagibna miza Heinrichsglück - Mechacon MH3.000-L1.000-P1.200

Soest

784 km

Gramofonska miza Nagibna miza
Heinrichsglück - MechaconMH3.000-L1.000-P1.200

Klic

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Lhedpfx Abefw Ah Rjbjb Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Poglej podrobnosti

Mali oglas

Tračna žaga - vodoravna BERG & SCHMID K-tech DG 62/45 HA-I

Nemčija

650 km

Tračna žaga - vodoravna
BERG & SCHMIDK-tech DG 62/45 HA-I

Klic

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Ledpsd Iipmjfx Abbshb Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Poglej podrobnosti

Mali oglas

Dodatki za varilno mizo WMT Basic-Set 7 - 70-teilig

Velen

867 km

Dodatki za varilno mizo
WMTBasic-Set 7 - 70-teilig

Klic

Stanje: novo, Quantity: 70 items Weight: 90 kg Condition: new Hole diameter: 28 mm WMT Set 7: 70-piece set, 28 mm system, consisting of: - 3x Tube screw clamps D28 90° – Art. 4028397 - 3x Tube screw clamps D28 180° – Art. 4028396 Lsdpfx Abowth N Tsbshb - 3x Tube screw clamps D28 45° – Art. 4028398 - 3x Tube screw clamps D28 300x150 – Art. 4028399 - 3x Tube screw clamps D28 300x200 – Art. 4028400 - 15x Ball lock pins D28x50 – Art. 4027663 - 10x Locking pins D28x80 – Art. 4028876 - 4x Universal stop D28 100x50x25 mm – Art. 4028469 - 4x Universal stop D28 150x50x25 mm – Art. 4028470 - 4x Universal stop D28 225x50x25 mm – Art. 4027657 - 2x Universal stop D28 300x50x25 mm – Art. 4027659 - 2x Stop and clamping angle D28 75x50x75x25 mm – Art. 4028657 - 2x Stop and clamping angle D28 175x50x75x25 mm – Art. 4028658 - 2x Stop and clamping angle D28 175x50x175x25 mm – Art. 4028649 - 2x Stop and clamping angle D28 175x50x75x25 mm – Art. 4028652 - 2x Stop and clamping angle D28 175x50x175x25 mm – Art. 4028653 - 2x Stop and clamping angle D28 275x50x175x25 mm – Art. 4028654 - 1x Set of stop and clamping angles D28 300x275x100 mm (1x left, 1x right) – Art. 4028847 - 2x Flat angle D28 175x175x25 mm, 1x slotted hole + 3x round holes – Art. 4028655

Poglej podrobnosti

Mali oglas

Rezkalni stroj s fiksno posteljo Correa BRAVA-30

Burgos

1.546 km

Rezkalni stroj s fiksno posteljo
CorreaBRAVA-30

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.500 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, širina mize: 1.100 mm, dolžina mize: 3.500 mm, skupna višina: 4.164 mm, skupna širina: 5.875 mm, skupna dolžina: 9.120 mm, največja hitrost vrtenja: 6.000 obr/min, teža obdelovanca (maks.): 8.000 kg, skupna masa: 29.000 kg, vrtilni moment: 760 Nm, ACCESSORIES Cooling System: Yes Through-spindle Coolant: Yes Portable Handwheel: Yes Workpiece Probe (Heidenhain): Yes Preparation for Renishaw Touch Probe: Yes Full Splash Guard: Yes Lhedpfx Abjulwy Aobeb Chip Conveyor (2 Augers + 1 Side Hinge-belt): Yes Automatic Tool Changer (ATC): Yes (24 tools)

Poglej podrobnosti

Oglašujte tukaj