Škarjasto dvigalo

Genie GS4069RT

Stanje: rabljeno, Leto izdelave: 2020, skupna dolžina: 3.740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height – retracted: 1.65 m - Platform length – outside: 2.79 m - Platform extension – length: 1.52 m - Maximum persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Lift capacity: 363 kg - Lift capacity with platform extension extended: 136 kg - Drivable at full platform height: 12.3 m - Drive speed – retracted: 5.6 km/h - Drive speed – extended: 0.5 km/h - Gradeability – retracted: 35% - Turning radius – inside/outside: 2.11 m / 4.6 m - Lift/lower time: 61 / 28 sec - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° Kwodpfxexpx Tfo Adkjw - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank: 37.9 L - Hydraulic system tank capacity (hydraulic drive): 68.1 L - Maximum wheel load: 1,737 kg - Tire ground pressure – front, platform fully extended: 657 kPa - Ground load: 10.29 kPa - Noise/sound pressure level (ground): 85 dBA - Noise/sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet. Kwedpfxjhrnbke Adkjw

Stanje: rabljeno, Leto izdelave: 2020, skupna dolžina: 3.740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height – retracted: 1.65 m - Platform length – outside: 2.79 m - Platform extension – length: 1.52 m - Maximum persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Lift capacity: 363 kg Ksdpfx Ajxpx Ivjdkoww - Lift capacity with platform extension extended: 136 kg - Drivable at full platform height: 12.3 m - Drive speed – retracted: 5.6 km/h - Drive speed – extended: 0.5 km/h - Gradeability – retracted: 35% - Turning radius – inside/outside: 2.11 m / 4.6 m - Lift/lower time: 61 / 28 sec - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank: 37.9 L - Hydraulic system tank capacity (hydraulic drive): 68.1 L - Maximum wheel load: 1,737 kg - Tire ground pressure – front, platform fully extended: 657 kPa - Ground load: 10.29 kPa - Noise/sound pressure level (ground): 85 dBA - Noise/sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 88 h, nosilnost: 363 kg, dvižna višina: 12.000 mm, dvižna moč: 363 kg/m, dolžina platforme: 2.790 mm, širina platforme: 1.600 mm, skupna masa: 5.039 kg, transportna dolžina: 3.120 mm, transportna širina: 1.750 mm, transportna višina: 2.740 mm, vrsta goriva: hibrid, barva: modra, Oprema: UVV varnostni pregled, === KEY SPECIFICATIONS === Year of manufacture: 2018 Operating hours: 88 hrs Machine width: 1.75 m Drive: 4x4 Drivable at full height: Yes Platform extension: Yes Engine power: 19.4 kW (Perkins 403D-11 diesel) Working height: 14.02 m Platform capacity: 363 kg Power source: Diesel Automatic outriggers: Yes Platform dimensions: 2.79 × 1.60 m (extendable to 4.31 m) Tyres: Foam-filled all-terrain tyres CE certified: Yes Machine weight: 5,039 kg Application: Outdoor === HIGHLIGHTS === Carefully sourced from reliable and traceable origins CE certification and complete documentation included Ready for immediate use and delivery Comprehensive technical documentation available === CONDITION === Excellent condition – demo unit with only 88 operating hours Original blue paintwork, very well maintained Available immediately ex stock Sittard === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide shipping possible Price: €23,450 (EXW, plus VAT) The Genie GS-4069 RT scissor lift combines electric and diesel-powered operation for maximum flexibility. Equipped with 4WD, automatic levelling, and a working height of 14.1 m – ideal for construction and maintenance tasks on uneven ground. This 2018 demo unit is fully CE-certified, tested, and in excellent condition. Professional technical support and spare parts available upon request. === DELIVERY === Kodpfx Adoxdampekoww Crane loading available on request for smooth transport Flexible transport solutions tailored to destination and logistics requirements All shipments handled professionally by the Collé Rental & Sales logistics team

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1.2014.86242, The subject of this report is a Dreistern laser-welded profile production line. The machine has been tested but not commissioned for production. It has accumulated 50 operating hours. It is designed for forming cold-rolled profiles, either open or closed sections, welded with a laser. The input material for profile production consists of black or galvanized steel strips. Kedsxz Tuuspfx Adksww Configuration (serial numbers according to technical documentation): 1 - Uncoiler Soprem H1250/D/1700ZR, serial no.: 20140388/1, year of manufacture: 2014 2 - Strip end welding machine Soprem CH-2540, serial no.: 20140388/2, year of manufacture: 2014 3 - Multi-roll forming machine Dreistern RS616, serial no.: 15773, year of manufacture: 2015  - Base frame, serial no.: not specified, year of manufacture: not specified  - Gear unit P60/80/90, serial no.: not specified, year of manufacture: not specified  - Servo drive, serial no.: not specified, year of manufacture: not specified  - Stands: profiling, embossing and perforating unit Dreistern P60, serial no.: not specified, year of manufacture: not specified  3 x roll forming tool Dreistern RC1500, RC1501, RC1502, serial no.: not specified, year of manufacture: not specified 4 - Laser Trumpf TruLaser Cell 1100, serial no.: S1200C0090, year of manufacture: 2014 5 - Cut-off machine Dreistern TS214.10, serial no.: 15122, year of manufacture: 2015  - Circular saw for cutting Dreistern S 200.10, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Stanje: rabljeno, Leto izdelave: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table size: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight: approx. 1750 kg Space requirement: approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angles - Mitre adjustment via lockable indexing every 15° Kodpfxeiqp Ers Adksww - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band break monitoring - Smooth-running saw carriage via preloaded ball linear guides - Additional table 450 x 450 mm - Machine lamp

Stanje: novo, The Servoturn 500/2000 is a state-of-the-art universal lathe classified under conventional lathes and belongs to the product group of servo lathes. This machine combines advanced feed technology with proven engineering, making the transition to servo-conventional lathes both more attractive and cost-effective. Equipped with powerful servo motors and precision ball screw drives on all axes, the Servoturn 500/2000 offers precise control of feeds and thread pitches without the need for change gears or gearboxes. The intuitive controls allow you to conveniently select feeds and thread pitches via rotary switches. Standard features such as a 3-axis position display and quick-change tool post further increase productivity. KNUTH machines are renowned for their high repeat accuracy and stability. You will appreciate the flexibility and the excellent surface finish, comparable to that of CNC lathes. Experience the benefits of the Servoturn 500/2000 and place your order today! Kjdpfel Iy Sxsx Adkjww

Stanje: rabljeno, Technical Details: Sheet width: 800 mm Coil weight: 12 t Max. sheet width: 800 mm Min. sheet width: 300 mm Strip thickness: max. 5.0 mm Strip speed: 4.5 / 25 m/min Working height: 1700 mm Load capacity: 12.0 t (Coil) Approx. machine weight: 7.3 + 6.62 t Decoiler dimensions: 3.2 x 1.9 x 2.7 m Approx. machine dimensions LxWxH: 2.5 x 2.6 x 2.45 m Decoiler with loading device and straightening machine Coil Decoiler UR 80.5: Max. outer Ø 1,500 mm Max. strip width 800 mm Max. load capacity 12 t Expansion Ø 470 - 630 / 570 - 730 mm (spread) Traversable transport unit LxWxH: 1700 x 1500 x 1000 mm; transverse movement, with prism support 1000 x 1000 mm Straightening machine UAH 80: Min. strip width 300 mm, max. 800 mm Max. strip thickness 5 mm 2 x feed rollers Ø 144 x 850 mm, adjustable 3 x lower straightening rollers Ø 100 x 850 mm, fixed 3 x upper straightening rollers Ø 110 x 850 mm, adjustable 30 mm Recommendation: Complete strip processing line (decoiler with loading device and straightening machine + straightening machine with hydraulic feeder) optionally available for sale together with stock no. 0100571. Kwedpfxju Ic Avs Adkow

Stanje: novo, Leto izdelave: 2024, Genie GS4390 diesel scissor lift with all-wheel drive, new, used, and demo machines available Kwedpforh Emtsx Adksw

Stanje: novo, Table length 1220 mm Table width 760 mm Kwodpfx Adoxqrhleksw Table height 910 mm Machine weight approx. 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: Functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM-fixture components with a diameter of approximately 1.6 cm. This provides you with the ultimate, high-performance, and compact mobile workstation. Expand your clamping and fixturing options and be ready for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and fixturing in welding and manufacturing applications. Clamp and fixate at any point on the reversible, double-sided ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm bores (UDN5150) 2 x Side clamp pliers, suitable for 1.5875 cm bores 2 x Inserta pliers – suitable for 1.5875 cm bores (PTT522K) 2 x Inserta pliers – suitable for 1.5875 cm bores (PTT634K) 2 x Magnetic V-pads for the top surface 2 x Locating pins, suitable for 1.5875 cm bores 2 x Angle supports, 1.5875 cm bores (T50305) 2 x Angle supports, 1.5875 cm bores (T50304) 4 x Stops, suitable for 1.5875 cm bores (T54203) 4 x Stops, suitable for 1.5875 cm bores (T54205) 4 x V-block spacers, suitable for 1.5875 cm bores 8 x D-stop bars, 1.5875 cm bores 8 x V-blocks, suitable for 1.5875 cm bores 10 x Ball lock bolts, suitable for 1.5875 cm bores 12 x Magnetic rest pins