Osebno dvigalo Genie AWP30S Super Series

Genie AWP-30S AC

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 159 kg, lastna masa: 393 kg, gradbena višina: 1.980 mm, vrsta goriva: električni, skupna dolžina: 1.350 mm, vrsta pogona: Elektro, gradbena širina: 740 mm, delovna višina: 11.000 mm, Specialna delovna ploščad Tehnično stanje: novo Stanje baterije: novo Isdpewyq Skjfx Af Tjtb

Stanje: skoraj kot novo (rabljeno), Mondial Forni Stonefloor oven 120x150, Baujahr 2016, nur einige Male benutzt. Isdpfx Afswf Ix Sj Tjtb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 159 kg, lastna masa: 352 kg, gradbena višina: 1.980 mm, vrsta goriva: električni, skupna dolžina: 1.350 mm, vrsta pogona: Elektro, gradbena širina: 740 mm, delovna višina: 11.000 mm, Navpična dvižna ploščad Tehnično stanje: Novo Iodpfox Hlngsx Af Tjtb

Leto izdelave: 2000, Stanje: rabljeno, Roofer's lift / sectional lift Böcker ES13B, year of manufacture 2000 with drive motor 1.5 kW Length: 13 meters Payload: 200 kg Available with or without car trailer Ijdpfxen Hxz To Af Tetb Immediately available Location: Austria, near Vienna

Stanje: novo, Leto izdelave: 2024, Stroj za profiliranje kovinskih stebrov za vinograde se uporablja v vinogradih in sadovnjakih za proizvodnjo kolov in stebrov. Običajno so vinogradniški stebri debeline 1,5-2 mm. Proizvodna linija je sestavljena iz razvijalca (decoiler), servo podajalca-ravnalca, stiskalnice, orodja za vtiskovanje, stroja za profiliranje in giljotine. Isdpfx Aet Tcz Ujf Tstb

Stanje: novo, Leto izdelave: 2025, Genie GS3246 E-Drive electric scissor lift, new and used – demonstration units available Iodpfxsrqfnfe Af Tjtb

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER - 1x 9-ton SAF or BPW axle - 100% galvanized - Gross vehicle weight (GVW): 19,500 kg - Unladen weight: approx. 5,500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8 t with radio remote control (Teleradio) - Hydraulic rear extension, full width 2550 mm x length 1500 mm - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm - Fifth wheel height: approx. 1,050 mm - 1,150 mm (other heights possible) - Tire brands: Goodyear, Pirelli, or Continental with twin tires - Spare wheel with mounting bracket - 24V 4.5kW electro-hydraulic motor for winch, loading platform, and rear extension - Custom modifications available on request - Choice of paint finish free of charge - All documents (COC, TÜV, etc.) for registration available For more info: kalepar *The pictures are for illustration purposes only. Copyright cannot be claimed. Itedpjkbyt Isfx Af Teb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Böcker LH 710 with electrohydraulic drive Year of manufacture: 1990 No. 3216/2 Itjdpfxjhh Swks Af Tsb Rated load: 300 kg Own weight: 255 kg Lifting height: 7100 mm Overall height: 2200 mm

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: Iodetwm Ubspfx Af Tjtb On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: novo, Leto izdelave: 2024, Genie Z34/22 IC diesel articulated boom lift, new, used, and demo machines available Itodsrnqq Hepfx Af Tjb