Škarje za profilno jeklo

GEKA HYD 55 SD

Stanje: rabljeno, Leto izdelave: 1996, Maximum punching force: 55 t Notching: 10 mm Hole diameter and thickness: 40 x 10 mm Flat steel: 300 x 15 mm or 200 x 20 mm Nodpfewgkq Tox Ag Tswc Angle steel 90°: 120 x 120 x 10 mm Angle steel 45°: 70 x 70 x 7 mm Round bar: 40 mm Square bar: 40 mm Strokes per minute at 20 mm stroke: 37 /min Throat depth: 250 mm Machine weight approx.: 1,800 kg

Stanje: pripravljen za uporabo (rabljen), Z električnim zadnjim prislonom Ploščina prebijanja: 70 ton Premer x debelina pločevine: Ø 28 x 20 mm Maksimalni hod: 80 mm Nwodpfxexgv E Tj Ag Tec 40 hodov/min Globina grla: 300 mm Delovna višina: 1065 mm Maksimalna debelina reza v pločevini: 20 mm Dolžina rezila: 455 mm 90° rez: 130 x 130 x 13 mm 45° rez: 90 x 90 x 10 mm Po meri rezan okroglo/kvadratno: 45 mm Elektromotor (moč): 7,5 kW Dolžina: 1800 mm Globina: 1200 mm Višina: 2000 mm Teža: 1650 kg

Stanje: novo, Metallkraft HPS 45 S Hydraulic Profile Ironworker/Punching Machine (3819045) Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat bar shear, angle bar shear, profile steel shear, and, starting from HPS 45S, notching station - DS series with two work cylinders and two foot pedals for simultaneous operation of the punching and profile shearing stations - Infinitely variable stroke adjustment - Larger throat depth for punch station with 620 mm optionally available, from HPS 55DS onwards - Heavy and stable welded construction - Notching blade standard from HPS 45S - Powerful 400 Volt motor - V-notch blade, oversized punching unit, and larger throat depth for punch station available upon request - Two-stage foot pedal for jog mode - Equipped as standard with MUBEA holders for punches No. 1, No. 2, No. 3 and dies No. 30, No. 45, No. 60; use of punch and die No. 4 and No. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - Significant time savings – cycle times - No chips - No coolant required Note: All hydraulic profile ironworkers are delivered filled with oil. TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1500 mm Width/Depth (product) approx.: 950 mm Height (product) approx.: 1680 mm Weight (net) approx.: 1400 kg Notching Station Notching station max. material thickness: 8 mm Max. notching width: 35 mm Max. notching depth: 75 mm V-notch tools (accessory): 100 x 100 x 8 mm Electrical Data Drive motor power: 4 kW Connection voltage: 400 V Network frequency: 50 Hz Flat Bar Shear Flat bar shear material width x thickness max.: 200 x 15 mm Flat bar shear material width max. x thickness: 300 x 12 mm Flat bar shear blade length: 316 mm Flat bar shear miter cut 45° leg length max. x thickness max.: 80 x 10 mm Flat bar shear working height: 955 mm Punching Station Punching pressure: 45 t Punching station diameter x sheet thickness max.: (steel 400 N/mm²) 22 x 15 mm Punching station max. diameter x sheet thickness: (steel 400 N/mm²) 38 x 8 mm Punching station throat depth: 175 mm Punching station max. stroke: 50 mm Punching station strokes per minute: 20 Punching station working height: 955 mm Round/Bar Shear Round bar capacity: 30 mm de Square bar capacity: 25 mm Angle Shear Angle shear cutting capacity 90° L-profile: 100 x 100 x 10 mm Angle shear cutting capacity 45° L-profile: 70 x 6 mm Angle shear cutting capacity U/I profile (accessory): 80 x 45 mm Angle shear cutting capacity T-profile (accessory): 40 x 5 mm Angle shear working height: 1140 mm SCOPE OF DELIVERY - Punching station - Flat bar shear - Angle shear - Profile shear with round and square blades - Notching station - Punch holder with bayonet fitting Nsdpjkzk Hvsfx Ag Tewc - Punch and die adaptors No. 1, No. 2, No. 3, No. 30, No. 45, and No. 60 - Punching, flat bar shear, and notcher with adjustable stops - Hook wrench - Foot pedal - Hydraulic oil Made in Turkey OTHER MODELS AVAILABLE ON REQUEST

Stanje: novo, Hydraulic Section and Plate Steel Shear LFSS Type HKM 60 – 5 Stations Including MUBEA punch and die holder Including Ringsland punch and die holder ::: PUNCHING STATION ::: Dia. / Sheet thickness: Ø 28 mm / 15 mm, Ø 38 mm / 11 mm, Ø 110 mm / 3 mm Stroke: 55 mm Strokes (20 mm): 26 / min Throat depth: 220 mm Working height: 940 mm ::: STEEL SHEAR ::: Round capacity: Ø 40 mm Square capacity: 35 mm ::: ANGLE SHEAR ::: Capacity 90°: 120 x 120 x 12 mm Capacity 45°: 80 x 8 mm Working height: 1140 mm ::: PLATE SHEAR ::: Capacity: 200 x 20 mm, Capacity: 300 x 15 mm, Cutting length: 317 mm Angle cut: 80 x 10 mm, Working height: 940 mm ::: NOTCHER ::: Thickness: 10 mm, Width: 42 mm, Depth: 100 mm Working height: 940 mm Nsdpfx Asgiplnjg Tewc Capacity: 60 t, Motor power: 4 kW, Voltage: 400 V Weight: 1,440 kg Dimensions (LxWxH): 1,520 x 950 x 1,780 mm

Stanje: rabljeno, Punching force: 550 kN (e.g. punches 30 mm in 16 mm material), with positioning device via foot switch for center punching Cuts 350 x 13 mm or 230 mm on the flat bar shear Throat depth: 305 mm Two separate foot switches for the punching and shearing sides, enabling independent punching and shearing Support table on the punching side Tool assortment included in the price Nsdst Exprepfx Ag Tswc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Tehnični podatki Nwedoxyyz Sspfx Ag Tec Hodi na minuto s 15 mm hoda: 24 /min Prebijalna sila: 450 kN Moč motorja: 2,2 kW Premer in debelina luknje do max.: 27×13 mm Ravno jeklo do max.: 300 x10/ 200×13 mm Kotno jeklo 90° do max.: 80x80x8 mm Kotno jeklo 45° do max.: 60x60x6 mm Izsekavanje do max.: 7 mm Teža stroja: 760 kg

Stanje: novo, Leto izdelave: 2024, Stroj ima 5 delovnih postaj: • Iztisna postaja Nodpfjx Hzf Uox Ag Towc • Škarje za ploščato jeklo • Škarje za kotno jeklo • Postaja za izsekavanje • Škarje za okroglo in kvadratno palico Tehnični podatki Hodov na minuto pri 20 mm hodu: 37 /min Izsev: 500 mm Sila izsekavanja: 550 kN Premer in debelina luknje do maks. 40×10 mm ali 20x20 mm Ploščato jeklo do maks. 300×15 ali 200×20 mm Kotno jeklo 90° do maks. 130x130x13 mm Kotno jeklo 45° do maks. 70x70x7 mm Palica do maks. 40 mm Kvadratna palica do maks. 40 mm Izsekavanje do maks. 10 mm

Stanje: novo, Leto izdelave: 2025, Zustand neu Baujahr 2025 Lagernummer 090054 Nodpjwirxwsfx Ag Tewc Lieferzeit prompt, Zwischenverkauf vorbehalten Ursprungsland Spanien Preis 17.300 € Leasingrate 298,94 €/Monat Lagernd: 1 Stück Sonderpreis 15.570 € Stanzkraft: 55 t Ausladung: 250 mm Anzahl der Stationen: 5 Max. Durchmesser bei Blechstärke (Baustahl): 40/10 mm Hub: 20 mm Hubzahl: 37 1/min Flachstahl: 300x15 mm Winkelstahl: 120x10 mm Rund-/Quadratstahl: 40 mm Ausklinker: 10 mm Motor: 5 kW Länge: 1670 mm Breite: 1160 mm Höhe: 2090 mm Gewicht: 1390 kg 2 Fußauslöser für unabhängiges Arbeiten an 2 Stationen Flachstahlschere Winkeleisenschere Rund- und Quadrateisenschere Rechteckausklinker Lochstanze Tisch an der Flachstahlschere Tisch an der Lochstanzstation Tisch an der Ausklinkstation Ölfüllung Betriebsanleitung in DEUTSCH und ENGLISCH OPTION: Kit € 970,00 bestehend aus: Längenanschlag 1000 mm mit elektrischer Kontaktauslösung, für Flach-, Winkel- bzw. Stabstahlstation Magnet-Maschinenleuchte 10 Set Rundstempel und Matrizen: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm