Navorni ključ

GEDORE TORCOFIX -Z 40-200 Nm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Todpfxsmhhf Sj Aiqjc Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, ZEATZ PHL – rotacijske mize – za obdelovance do 150 t Serija linearnih rotacijskih miz ZEATZ PHL združuje visoko natančno tehnologijo rotacijskih miz z integrirano linearno osjo. Omogoča prilagodljive rešitve za obdelavo velikih in težkih obdelovancev – od natančnega pozicioniranja do simultane obdelave z vrtanjem in interpolacijo. Vaše prednosti: Tedem Tv Azjpfx Aiqjc ✔ Integracija v obstoječe stroje s krmiljenjem HEIDENHAIN, SIEMENS ali FANUC ✔ Originalni rezervni deli na voljo iz zaloge ✔ Tehnična podpora in storitev na kraju samem v Nemčiji ✔ Financiranje in nakup na obroke na zahtevo ✔ 24 mesecev garancije Tehnične značilnosti: Velikosti miz: 1.000 x 1.000 mm 1.200 x 1.200 mm 1.500 x 1.500 mm 1.800 x 1.800 mm 2.000 x 2.000 mm 2.500 x 2.500 mm 3.000 x 3.000 mm 3.500 x 3.500 mm 4.000 x 4.000 mm (možne so tudi okrogle površine za pritrditev) Maksimalna teža obdelovanca: približno 6.000 do 150.000 kg Linearna os: Hod: približno 1.000 do 3.000 mm (v korakih po 500 mm) Natančnost pozicioniranja: ± 5 kotnih sekund Integracija: Združljiva s krmiljenji HEIDENHAIN, SIEMENS in FANUC Kontaktirajte nas – z veseljem vam svetujemo in pripravimo individualno ponudbo.

Stanje: generalkompletno obnovljen (rabljeno), Shank cutter, slot cutter, Tsdpfx Ajiuh E Isiqjc corner cutter Make: Walter Model: Prototyp P 31 23017-20 Shank diameter: 20 mm Cutting diameter: approx. 19 mm Cutting length: 38 mm Used, freshly ground and coated Material: HSS Co

Stanje: novo, Leto izdelave: 2020, obremenitev mize: 60.000 kg, nosilnost: 60.000 kg, DEMMELER DRALT 2500 Schwenk-Rundtisch. Neuwertig, unbenutzt, gelagert in beheiztem Lager. Abmessungen: 2.500 x 2.500 mm, Tragfähigkeit 60 Tonnen. Linearhub: 2.500 mm. Tjdpfx Aiowdiwajqoc Schwenkbereich: 10°. Kontinuierliche Drehbewegung. Linearmaßsystem: Heidenhain LC 185.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna masa: 95 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Suction capacity at connection*: 2200 m³/h (free-blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Sound level*: 65 dB(A) Dimensions L/W/H in mm: L 1623 / W 508 / H 545 Colour: RAL 7035 Weight: 91 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or custom colour available on request Filter configuration*: - 40 mm aluminium mesh pre-filter (optional/retrofit: PrePac pre-filter kit) - 1 electrostatic filter cell - 20 mm aluminium mesh post-filter (optionally: 40 mm post-filter variants) Tedpfoum Uzaox Aiqsc OPTIONAL: Multiple pre-filter kits possible Application: Horizontal electrostatic air cleaner with EC radial fan for the separation of oil mist, emulsion mist, and smoke from workshop air in recirculation mode. Vertical raw air intake via suction elbow with intake nozzle. Clean air recirculation through adjustable diffusion grille. Your advantages with the ELBARON series: - 6 device variants available - Direct from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and airflow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of airflow rates available - Adaptable to contaminant load and airflow requirements - Large range of installation and connection accessories - Quality made in Germany We have developed our hall extraction systems as a cost-effective alternative to expensive central extraction systems or complex single-machine extractions. This allows you to protect your employees' health and preserve your production facility without major investments. The ELBARON® filter series has been developed for use in machining processes with neat oil and for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filter units on the market and are in use worldwide.

Stanje: skoraj kot novo (rabljeno), Quantity: 1 set Year of manufacture: unknown Required space: approx. 0 m For sale here is a package of Sandvik Coromant indexable inserts. Includes both new and a few lightly used pieces. Todpfx Aisvx Uzhoqjc Year of manufacture unknown.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, NA PRODAJU: Industrijski rashlađivač Dimplex Koolant Koolers Model: HOV7500-2PR-SS-NF-FILT-SI Proizvođač: Dimplex Thermal Solutions (Kalamazoo, MI, SAD) Serijski broj: 31109 Tehničke specifikacije: Sila kompresora: 7,5 KS Sila pumpe: 2,5 KS Tjdpfev U Ah Isx Aiqjc Radni medijum: R407C – 8,2 kg Napajanje: 460V / 3 faze / 60 Hz Maksimalna struja: 25 A Stanje: Korišćeno manje od 100 sati, bilo priključeno na projekat koji je otkazan pre početka, potpuno ispravno. Dizajnirano za visokoperformansno hlađenje u zahtevnim industrijskim uslovima. Primena: Idealno za CNC mašine, lasersku opremu, varilačke sisteme, preradu plastike i druge industrijske procese osetljive na temperaturu. Lokacija: Sremska Mitrovica, Silicon Plus doo.

Stanje: rabljeno, Dolžina 630 mm Širina 400 mm Granitna plošča 755x560x75 mm merilna plošča Tedpfx Ajyr Sl Usiqsc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 11.960 h, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.421 mm, vrsta pogona: Diesel, Dieselski viličar ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tip droga: Standard Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tsdpfx Aiowx Ar Heqsc Tehnično stanje: dobro Opis: Polovična kabina Stranski pomik, 3. ventil, 4. ventil, ogrevanje,

Stanje: rabljeno, Boring head, spindle head, drilling head, grooving boring head, grooving head, spindle drilling head, facing head, spindle tool - Manufacturer: Sandvik Coromant R391.B03R-40F53 A - Mounting: Ø 40 mm Tedpfx Aoc Spm Deiqsc - Boring tool holder: 16 x 8 mm - Tool diameter: Ø 435 mm - Weight: 6.1 kg