Aksialni ventilatorski kondenzatorski vodni hladilnik

Günter

Stanje: rabljeno, Rotacijska naprava Gunter Seibold rotacijska naprava za HTS-tuljave – brezstopenjsko nastavljiv pogon (tip S05082) Opis: Profesionalna rotacijska naprava za namestitev in vrtenje HTS-tuljav z jedrom za navijanje. Razvita za enakomerno porazdelitev dvokomponentne smole med procesom strjevanja. Idealna za razvojna, laboratorijska ali proizvodna okolja z visokotemperaturnimi supratovodnimi tuljavami. Navijalna oblika je električno ogrevana, napajanje je izvedeno neposredno v obliki (ni vključeno v dobavo). Stroj prepriča s precizno regulacijo, enostavno upravljanjem in konstrukcijo, ki je enostavna za vzdrževanje. Tehnična oprema Trden strojni okvir: Varjena konstrukcija iz pravokotnih cevi z nastavitvenimi vijaki in pritrdilnimi elementi na tleh Pogon: Hjdpezil R Refx Ag Aenu Asinhroni motor z planetarnim reduktorjem (11 kW, 400 V, 50 Hz, 3 faze) Brezstopenjsko nastavljiva hitrost vrtenja (0,2 – 100 min⁻¹) Mehki zagon in mehki postanek prek frekvenčnega pretvornika (štirichvadrančni regulator) Elektromagnetna vzmetna zavora (varna zaustavitev v primeru izpada električne energije) Smer vrtenja je preklopljiva desno/levo Upravljalna plošča: 5,7" zaslon na dotik za nastavitev hitrosti vrtenja, smeri, nagiba, časa ali števila obratov Gumb za nujno ustavitev, ergonomsko integriran 2 programirljiva analogni vhodi Elektrika in omarica: Krmilnik je integriran v strojni okvir Napajanje 400 V / 230 V, 24 V DC nadzorna napetost Varovalke, zaščita RCD 30 mA Vtičnice: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Omarica s klimatsko napravo Popolno ozemljitev in statično razbremenitev glavne gredi Delovna luč, nastavljiva po višini in smer Lastnost / Vrednost Maks. premer tuljave 1.500 mm Prehod tuljave 1.700 mm Višina vrha nad tlemi 1.100 mm Maks. obremenitev na vrtljivi plošči 500 kg Vrtljiva plošča Ø 600 mm, 4 T-utorji (DIN 650) Območje hitrosti vrtenja 0,2 – 100 min⁻¹ (brezstopenjsko) Navor 775 – 539 Nm Obratovalna napetost 400 V / 50 Hz Nadzorna napetost 24 V DC Priključna moč 11 kW Priključni tok 32 A Barvna shema (po RAL) Osnovni stroj: Modra (RAL 5010) Gibljivi deli: Rumena (RAL 1021) Upravljalna plošča / omarica: Svetlo siva (RAL 7035 / 5010) Teža: pribl. 1800–2000 kg Stanje: rabljeno Obseg dobave: (Glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 55,16 kW (75,00 KM), vrsta goriva: dizel, barva: rumena, lastna masa: 5.500 kg, obratovalna teža: 5.500 kg, največja dovoljena obremenitev: 2.500 kg, dvižna moč: 2.500 kg/m, dvižna višina: 4.500 mm, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2026, obratovalne ure: 1 h, številka stroja/vozila: GG2500T, Oprema: dodatne luči, kabina, nizka raven hrupa, Telescopic Loader GG2500TEL Telescopic Loader The Gunter Grossmann GG2500TEL is a modern telescopic loader that combines a powerful engine with exceptional versatility. Powered by a Kunming Yunney Power Euro 5 engine with 75 HP, it meets strict emission standards and is engineered for demanding tasks under a variety of working conditions. Powerful Engine and Efficient Hydraulics The 75 HP engine works in tandem with a hydraulic system operating at 16 MPa and a 90 L/min oil flow, ensuring fast, precise, and energy-efficient execution of operations. The hydraulic setup guarantees smooth boom movements and excellent load control. Lifting Capacity and Durability With a weight of 5,500 kg and a nominal lifting capacity of 2,500 kg, the GG2500TEL provides stability and safety during heavy lifting operations. It offers a maximum lifting height of 4.5 meters, facilitating effective material handling at considerable heights. Versatility in Working Range Equipped with a 1.0 m³ bucket and a telescopic boom, it can handle loads from 800 kg (with the boom extended) up to 2,500 kg (with the boom retracted), offering a wide range of operational flexibility for various tasks. Mobility and Compact Dimensions With a top speed of 20 km/h, a wheelbase of 1,550 mm, and a track width of 2,550 mm, the machine delivers excellent stability and maneuverability. Its compact size — 6,270 mm in length, 2,100 mm in width, and 2,670 mm in height — makes for easy transport and efficient operation in confined spaces. Machine weight: 5,500 kg Engine: Kunming Yunney Power Euro 5 Engine power: 75 HP Lifting height: 4,500 mm Rated lifting capacity: 2,500 kg Rated engine speed: 2,400 rpm Hydraulic pressure: 16 MPa Hsdpeygnvlefx Ag Aonu Hydraulic oil flow: 90 l/min Standard tire: 16/70-20 Bucket capacity (m³): 1.0 Maximum lifting with retracted boom: 2,500 kg Maximum lifting with extended boom: 800–1,000 kg Maximum speed: 20 km/h Wheelbase: 1,550 mm Track width: 2,550 mm Discharge height: 2,850 mm Bucket capacity at maximum lift height: 800–1,000 kg Length: 6,270 mm Width: 2,100 mm Height: 2,670 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,03 kW (15,00 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 1.020 kg, lastna masa: 1.020 kg, obratovalna teža: 1.020 kg, dvižna višina: 2.610 mm, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and top quality from JAPAN 1000. The Japan 1000 is a high-end machine designed for demanding construction, electrical, and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. American EATON swing motor 4. Two-speed travel 5. Adjustable track undercarriage 6. Articulated boom (Pro) 7. Concealed travel motors 8. Concealed hydraulic hoses 9. Modern structural design Hnsdpfxjvuk Uve Ag Asu 10. Complies with the latest EURO 5 emission standards 11. Parker hydraulic pump 12. Integrated hydraulic oil cooler with Kubota engine 13. Heavy-duty rubber tracks for a smooth ride 14. Servo joystick controls 15. Two travel speeds We have all spare parts for machines of our brand available throughout Europe. SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1,020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm Engine: Japan - KUBOTA Rated power: 11.8 kW/2300 rpm Main pump: Parker Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Boom swing: Side-shift Travel speed: Two-speed Drive motors: Concealed Hoses in the boom: Concealed DIMENSIONS Overall dimensions (LxWxH): 2770 x 896 x 1490 mm Wheelbase: 770 mm Total track length: 960 mm WORKING RANGE Max. digging depth: 1,650 mm Max. digging height: 2,610 mm Max. digging radius at ground level: 2,890 mm Swing radius: 360° Max. dozer blade lift height: 345 mm Max. dozer blade digging depth: 255 mm

Stanje: novo, prevoženi kilometri: 1 km, barva: rumena, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2025, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, Gunter Grossmann GG09 + KUBOTA EURO 5 The new Günter Grossmann GG09 LOADER The Günter Grossmann GG09 loader (900 kg lifting capacity) is the brand-new machine from Günter Grossmann, designed for European businesses. Günter Grossmann machines are high-quality products built to meet professional requirements. This loader is exceptionally powerful and can perform its tasks reliably under all conditions. Operation is highly comfortable, with a user-friendly, clear, and intuitive control panel. The cab is soundproofed, insulated, and equipped with heating. The machine also features a spacious, well-glazed cab to ensure safe and comfortable long-term operation. The loader boasts a highly durable and robust construction. It is equipped as standard with a quick coupler, allowing for rapid and convenient attachment changes without leaving the cab. Optional extra equipment available on request. (Price excluding VAT) Standard scope: GG09 loader + bucket + quick coupler Hedpjvuk U Ajfx Ag Asnu Model: 900 kg Specification Model: GG09 Lifting capacity: 900 kg Engine: Kubota Euro 5 (V1505) Rated engine power: 24.47 HP Number of cylinders: 4 Rated speed: 2400 rpm Machine weight: 2300 kg REACH Bucket capacity: 0.5 m³ Lifting capacity: 900 kg Lifting height: 2750 mm MAIN DIMENSIONS Overall length (bucket on ground): 4037 mm Overall height: 2264 mm Overall width: 1446 mm REACH Bucket capacity: 0.5 m³ Lifting capacity: 900 kg Lifting height: 2750 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 16,5 kW (22,43 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 3.300 kg, lastna masa: 3.300 kg, obratovalna teža: 3.400 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, emisijski razred: Euro 5, Leto izdelave: 2025, obratovalne ure: 1 h, Oprema: dodatne luči, kabina, The GG3500 excavator combines high power, outstanding performance, and reliability. Equipped with the KUBOTA V1505 engine and advanced hydraulics, it is ideal for demanding construction applications. Its compact size and extensive feature set ensure versatile use across a wide range of job sites. High Performance with Powerful Engine Powered by the KUBOTA V1505 engine, delivering 18.5 kW, four cylinders, and liquid cooling for efficient operation. Fuel consumption is between 1.3 and 1.5 L/hour, and the 45 L fuel tank allows for extended operation. Premium Hydraulic System Hedox H Uxhspfx Ag Aonu Fitted with LTM03AX and LKC slewing hydraulic motors, featuring an oil flow of 99 L/min and system pressure of 20 MPa, delivering strong digging forces and reliable system performance. The hydraulic oil tank holds 40 L for uninterrupted operation. Excellent Operating Parameters Maximum digging depth of 2827 mm, digging radius of 4831 mm, and breakout force of 27 kN. Maximum dumping height of 3181 mm, suitable for loading at increased heights. Compact Dimensions and Stability Dimensions: length 2921 mm, width 1550 mm, height 2485 mm, with 522 mm ground clearance. Bucket width of 400 mm and arm length of 1620 mm ensure precision and extensive working range. Mobility and Comfort Two travel speeds (0-1.8 km/h and 0-2.8 km/h) provide flexibility on the job site. Ground pressure of 36 kPa enables operation on soft surfaces, and a 360° swing radius allows easy manoeuvrability in confined spaces. Machine weight: 3300 kg Engine model: KUBOTA V1505 Number of cylinders: 4 Maximum power: 18.5 kW Cooling system: Liquid cooling Engine oil capacity: 6 L Fuel consumption: 1.3-1.5 L/h Max RPM: 2300 rpm Fuel tank capacity: 45 L Hydraulic oil tank capacity: 40 L Hydraulic motor model: LTM03AX Travel motor model: LKC Swing hydraulic motor model: LKC Hydraulic oil flow: 99 L/min Rated pressure: 18 MPa Maximum rated pressure: 20 MPa Bucket capacity: 0.08 m³ Travel speed: 0-1.8 / 0-2.8 km/h Gradeability: 30% Ground pressure: 36 kPa Max digging force: 27 kN Max digging radius: 4831 mm Max digging depth: 2827 mm Max digging height: 4563 mm Max dumping height: 3181 mm Max swing angle: 110° Length: 2921 mm Width: 1550 mm Height: 2485 mm Ground clearance: 522 mm Bucket width: 400 mm Dozer blade width: 1550 mm Arm length: 1620 mm Track dimensions: 300x52.5x84

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vrsta prenosa: hidrostat, barva: rumena, skupna masa: 2.000 kg, lastna masa: 2.200 kg, obratovalna teža: 2.200 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2026, številka stroja/vozila: 2000, Oprema: dodatne luči, kabina, The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, making it ideal for earthmoving, construction, and installation projects. Its stable design and precise hydraulic system ensure high performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F diesel engine delivering 15.2 kW, ensuring fuel efficiency, long service life, and consistent performance. The excavator can also operate on slopes up to a maximum of 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient working movements. The bucket breakout force is 14 kN, and the arm digging force is 10 kN, providing fast and effective digging operations across various soil conditions. Working Parameters The GT2000 excavator offers a maximum digging depth of 2,050 mm, a vertical digging depth of up to 1,955 mm, and a dumping height of 2,385 mm. Its maximum working range is 3,860 mm, with a minimum digging height of 3,365 mm. Swing and Maneuverability The upper structure has a swing speed of 10–12 rpm, ensuring efficient and rapid work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, allowing for smooth maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing excellent stability. The dozer blade ground clearance is 230 mm, with a maximum blade digging depth of 275 mm, supporting safe operation on uneven terrain. Swing Boom and Cabin The swing boom can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator excellent visibility and comfort during work. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Swing speed: 10–12 rpm Max bucket digging force: 14 kN Max arm digging force: 10 kN Hydraulic pressure: 18 MPa Max gradeability: 35° Travel drive: Single speed Swing boom: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging reach: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Hnjdpfsqv E S Rsx Ag Aeu Max dozer blade digging depth: 275 mm Swing boom angle left: 75° Swing boom angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Stanje: novo, vrsta goriva: dizel, skupna masa: 1.600 kg, lastna masa: 1.600 kg, Leto izdelave: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close cooperation between Günter Grossmann and Kubota, the new GG1600 excavator has been developed. Günter Grossmann GG1600 crawler excavator. GG1600 mini excavator on rubber tracks, KUBOTA engine, KDK hydraulic pump, US EATON drive motor. Very high quality. Standard Equipment 400 mm digging bucket Additional attachments for the machine are available for purchase. The GG1600 model is an excellent machine for even the most demanding construction, electrical, and hydraulic companies. We guarantee post-warranty service. The excavator is manufactured based on robust European technology. SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Hnodpfxjggai Us Ag Aju Engine power: 15 kW/2300 rpm Main pump: KDK Japan Swing motor: EATON USA Travel motor: KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Swing radius: 360° Optional Accessories (available separately) • Earth auger • Grapple • Digging tooth • Rake • Narrow bucket 200 mm • Narrow bucket 380 mm • Grading bucket 500 mm • Grading bucket 800 mm • Quick coupler • Hydraulic breaker GG1600 13,400 euro excl. VAT GG800 Bn83wivh 5,900.00 euro incl. VAT 7,139.00 euro incl. VAT GG1000 9,909.00 euro incl. VAT 8,190.00 euro excl. VAT Transport costs on request We supply both businesses and individuals in the Netherlands and Belgium! Every delivery includes a VAT invoice and (factory) warranty. Click on 'E-mail this advertiser' and provide your contact details, and we will send you the webshop information. Phone (7 days a week from 8:00 to 23:00) Collection by appointment is possible, including evenings and weekends. Easy payment options... - Via our webshop - Cash or debit card upon collection/delivery - Via iDeal (request a link by email) For GG800 details, please view our other advertisement. For more information, feel free to call or email us. Leasing options available.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 1 h, nosilnost: 3.500 kg, dvižna višina: 7.690 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 95 kW (129,16 KM), proizvajalec motorjev: CHANGCHAI, vrsta prenosa: samodejen, napetost baterije: 12 V, skupna masa: 7.300 kg, lastna masa: 7.300 kg, skupna dolžina: 5.670 mm, barva: rumena, Oprema: kabina, vilice za palete, Gunter Grossmann Telehandler GG635 Telescopic Loader Telehandler GG635 Telehandler The GG635 is an advanced telescopic loader designed for heavy-duty applications in agriculture, construction, and logistics. It features a robust build, a precise hydraulic system, and a powerful CHANGCHAI engine, providing reliability, high efficiency, and optimum operator comfort in demanding working environments. CHANGCHAI 4G33TC Engine – Power and Durability The GG635 is powered by a CHANGCHAI 4G33TC inline, four-stroke, turbocharged water-cooled engine with a 3.26-litre displacement. The engine delivers 70 kW at 2400 rpm and a maximum torque of 330 Nm at 1680 rpm, ensuring dynamic and smooth performance with low fuel consumption and a long component lifespan. Hydrostatic Drive and High-Performance Hydraulic System The hydrostatic transmission, driven via a driveshaft, enables precise manoeuvring on challenging terrain. The axial piston pump with sensor delivers a flow rate of 175 L/min at a working pressure of 280 bar, ensuring fast and accurate operation of attachments and maximum operational efficiency. Safety and Stability Hnjdpfx Agoynb H Te Aju The robust construction and operating weight of 7,300 kg provide exceptional stability under all conditions. Wet brakes and high-quality components guarantee reliability, safety, and operator comfort during intensive use. Maximum lifting capacity: 3,500 kg Bucket capacity: 0.9 m³ Fork length: 1,200 mm Operating weight: 7,300 kg Engine manufacturer: CHANGCHAI Model: 4G33TC Type: Inline, water-cooled, turbocharged, four-stroke Rated power / rpm: 70 kW / 2,400 rpm Maximum torque / rpm: 330 Nm / 1,680 rpm Displacement: 3.26 L Dimensions: 715 × 660 × 795 mm Brand/Model: XCMG WA1102 / WA2102 Static axle load: 18 t Brakes: Wet brakes Max. output torque (Nm): 2,600 Brand/Model: XCMG TM043II Rated input power: 97 kW Maximum input torque: 800 Nm Maximum input speed: 3,500 rpm Transmission: Hydrostatic, via driveshaft Speed: 0–11 / 35 km/h Working pump: Axial piston pump with sensor Flow rate: 175 L/min Pressure: 280 bar Fuel tank: 120 L Hydraulic oil tank: 180 L A Overall length with standard bucket 5,670 mm A Overall length with pallet forks 6,030 mm B Overall length without attachment 4,650 mm D Wheelbase 3,005 mm F Cab height 2,373 mm J Overall working height with bucket 7,690 mm K Max. bucket pivot height 7,000 mm L Dump height with bucket (telescoped) 6,750 mm L Dump height with forks (telescoped) 6,900 mm L1 Dump height with bucket (retracted) 4,450 mm L1 Dump height with forks (retracted) 4,610 mm M Max. dumping height (telescoped) 6,250 mm M1 Max. dumping height (retracted) 4,000 mm N Reach with bucket (retracted) 590 mm N1 Reach with forks (telescoped) 3,570 mm N2 Reach with forks (retracted) 1,020 mm O Digging depth 29 mm P Overall height 2,320 mm Q Track width 2,000 mm S Ground clearance 360 mm T Max. turning radius with bucket 5,571 mm T1 Max. working radius with forks 4,258 mm U Outer turning radius 4,829 mm V Inner turning radius 2,204 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 10 kW (13,60 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 960 kg, lastna masa: 960 kg, obratovalna teža: 960 kg, največja dovoljena obremenitev: 150 kg, dvižna moč: 150 kg/m, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, emisijski razred: Euro 5, vzmetenje: jeklo, Leto izdelave: 2026, Oprema: dodatne luči, gumene gosenice, hidravlika, nastavljivo podvozje, zaščita za glavo, Bagri GT950 Profesionalni goseničar GT950 Model GT950 – 960 kg Predstavljamo kompaktni in izjemno funkcionalni gosenični bager GT950 – idealna rešitev za zemeljska, gradbena in inštalacijska dela v prostorih z omejeno površino. S svojo lastno težo 960 kg in robustno konstrukcijo zagotavlja stroj stabilnost, natančnost in udobje, tudi v zahtevnih terenskih pogojih. Majhne dimenzije in zglobna roka z radijem obračanja le 733 mm omogočajo vrhunsko delo na ozkih zemljiščih, v vrtovih ter na gradbiščih z omejenim delovnim prostorom. Motor in zanesljivost Bager je opremljen z modernim motorjem Koop 192F, ki ustreza standardu Euro 5, kar zagotavlja nizko porabo goriva in miren tek. Obrnjen cilinder na roki poveča vzdržljivost in varnost pri intenzivni uporabi, kar jamči dolgo in brezhibno delovanje stroja. Okretnost in stabilnost na terenu Zahvaljujoč raztegljivim gosenicam s širino 180 mm in stabilnemu podvozju širine 950 mm, GT950 zagotavlja odlično stabilnost in oprijem na neravnem terenu. Kompaktne celotne mere (2650 mm dolžine, 930 mm širine in 2200 mm višine) omogočajo prosto manevriranje tudi v tesnih delovnih okoljih, odmik podvozja od tal 380 mm pa omogoča enostavno delo tudi na zahtevni podlagi. Odlična zmogljivost Impresivne operativne zmogljivosti vključujejo največjo globino kopanja do 1680 mm, največji doseg kopanja na nivoju tal 2430 mm in višino kopanja do 2490 mm. Izmetna višina 1760 mm omogoča enostavno nakladanje materiala, minimalni radij kopanja 1340 mm pa zagotavlja natančno delo v omejenih prostorih. Porivalna deska z višino dviga do 175 mm in spustom do 325 mm dodatno povečuje funkcionalnost stroja. Hodpszgn Tijfx Ag Ajnu Tehnične specifikacije Model GT950 Teža 960 kg Motor Koop 192F Euro 5 Širina žlice 420 mm Obrnjen cilinder na roki Da Joystick Da Zglobna roka Da Raztegljive gosenice Da Največji doseg kopanja na nivoju tal 2430 mm Največja globina kopanja 1680 mm Največja višina kopanja 2490 mm Največja višina izmeta 1760 mm Minimalni obračalni krog 1190 mm Minimalni radij kopanja 1340 mm Največja višina dviga porivalne deske 175 mm Največja globina porivalne deske 325 mm Skupna dolžina 2650 mm Skupna višina 2200 mm Skupna širina 930 mm Skupna dolžina gosenic 1100 mm Obračalni radij zgornjega dela 733 mm Odmik podvozja od tal 380 mm Širina podvozja 950 mm Širina gosenic 180 mm Višina gosenic 320 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 47,81 kW (65,00 KM), vrsta goriva: dizel, barva: rumena, lastna masa: 6.530 kg, obratovalna teža: 6.530 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2025, Oprema: kabina, žerjav, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional jobsite. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with strict Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, allowing for extended operation without frequent refueling. The hydraulic oil flow of 85 L/min and main relief valve pressure of 24.5 MPa ensure robust work performance for fast, precise movements and high digging force. Outstanding Operating Parameters The G70X offers a wide operational range with a maximum digging reach of 6535 mm, minimizing the need to reposition the machine. It achieves a maximum digging depth of 3530 mm, digging height of 6715 mm, and dumping height of 4905 mm, making it suitable for deep excavation work and efficient material handling at height. Speed and Maneuverability Designed for high mobility, the G70X reaches a maximum travel speed of 30 km/h, allowing rapid movement across the site. The platform swing speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front swing radius of 2275 mm and a minimum rear swing radius of 1665 mm, the excavator offers excellent maneuverability, perfect for work in narrow or challenging terrains. Technical Specifications Weight: 6530 kg Engine: Euro 5 Yuchai F3065-S580 Engine Power: 48 kW (65 HP) Oil Flow: 85 L/min Main Valve Relief Pressure: 24.5 MPa Maximum Digging Force: 35 kN Maximum Travel Speed: 30 km/h Platform Swing Speed: 8.5 rpm Fuel Tank Capacity: 135 L Hydraulic Oil Tank Capacity: 120 L Maximum Digging Reach: 6535 mm Maximum Digging Depth: 3530 mm Maximum Digging Height: 6715 mm Hnjdpfx Ajxr Rwhsg Aeu Maximum Dumping Height: 4905 mm Minimum Front Swing Radius: 2275 mm Minimum Rear Swing Radius: 1665 mm Overall Length: 5950 mm Overall Width: 2010 mm Overall Height: 2800 mm Wheelbase: 2410 mm Tyre Size: 195/85-20 Ground Clearance: 430 mm Blade Width: 1980 mm Blade Height: 390 mm Bucket Width: 700 mm Boom Length: 3400 mm