Odvod varilnega dima

Fumator Minivac 350D(1)

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Rodpfx Abjd Rzc Rshjn Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, največja višina reza: 250 mm, delovna višina: 850 mm, moč: 7,5 kW (10,20 KM), We are selling 1 x JRIMAC under-table crosscut saw UKS 1,000 Crosscut capacities: 60x940mm – 140x820mm – 180x720mm – 220x520mm – 240x340mm Maximum cutting height: 260mm Saw blade: 700mm Working height: 850mm Rsdpfxorfudrj Abhsn Extraction ports (top and bottom): 160mm - Infinitely adjustable, pneumatic feed rate - Hydraulic brake cylinder for uniform stroke speed - Pneumatically controlled workpiece clamping device - Cutting operation triggered via two-hand control with safety guard - Roller conveyors and stop systems available on request

Stanje: rabljeno, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Rsdpfxeu Uvalo Abhjn Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Rodpolat Hdsfx Abhjn Machine in very good condition

Leto izdelave: 2014, Stanje: rabljeno, PROLOGIC window construction software Redpfx Aorci S Sobhsn FenOffice 14 Conturex

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut. Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts. The machine control system complies with CE standard 89/289. Technical Data: Cutting range in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid approach of the saw frame to the material edge via pushbutton Manual miter adjustment from 45°–90°–30°, infinitely variable on scale The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Central machine operation Saw band drive with automatic end-stop Movable band guiding arm, adjustable to material width Saw band idler wheels with carbide guides Chip removal brush, rotating with the band Saw band tensioning with torque wrench Redpfet D Azcsx Abhen Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant length: 60mm Cutting speed: AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel Drive motors: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Leto izdelave: 2006, Stanje: dober (rabljeno), Gluing Machine FIN SC2R/1300 with 2 rollers Model: SC2R-1300 Year of manufacture: 2006 Manufacturer: FIN s.r.l., Italy Main technical specifications: - Working width: 1300 mm - Maximum clearance between rollers: 120 mm - Roller diameter: 185 mm - Feed speed: 19 m/min - Net weight: 390 kg - Overall dimensions: 64 x 210 x 136 cm - Overall dimensions with casing: 73 x 200 x 153 cm - 400 V, 50 Hz, 0.37 kW Rjdpfx Aofguntjbhon Ensures precise and uniform application with any type of adhesive and outstanding technical characteristics. Its high practical utility, functionality, and operator safety place it among the top two-roller gluing machines. The application roller is coated with acid-resistant rubber, ground and grooved, designed for heavy-duty use. Featuring a rationally constructed rubber layer, it allows for 6-7 regrindings. The rollers are easy and fast to disassemble. Distribution is accurate and uniform on one or both sides of the panels. Special shock absorbers on the roller supports enable automatic roller opening, allowing the processing of panels with different thicknesses within a 5 mm range. They also compensate for any panel parallelism deviations. Even adhesive dosing is ensured by a rectified distribution tank made of sheet metal, allowing for very quick removal for cleaning. The drip tray for glue and wash water is made of galvanized sheet steel and can be pulled out for easy cleaning. Protective covers made of sheet metal are installed on the rollers and adhesive distribution tank. The protective cover prevents any object thicker than 5 mm over the preset clearance from being inserted between the rollers, ensuring maximum operator safety. The electrical installation is housed in a waterproof enclosure, equipped with fuses and thermal protection for the motor and transformer. Control panel with start button, stop button, and warning light (24 V). Roller rotation chain with a self-adjusting tensioning sprocket. Roller washing system with a perforated wash tube for water supply during cleaning operations.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle EM-28 rob za ojačanje i obrezivanje rubova edgemaster, godina proizvodnje 2006, na prodaju! Dužina furnirske trake: 420 - 2800 mm Širina furnirske ploče (poprečna vlakna): 400 - 4200 mm Debljina furnirske trake (uključujući obrezivanje): 0,3 - 1,5 mm Debljina furnirske trake: 0,3 - 2,0 mm Brzina proizvodnje (kontinuirana): 15 - 35 m/min Odrezivanje sa svake strane: 10 - 350 mm Širina trake (papira): 6 mm Debljina trake (papira): 0,16 mm, tip CP-99 Kolut (unutarnji i vanjski promjer jezgre): ∅ 75 mm, ∅ 325 mm Širina koluta: 65 mm Duljina trake na kolutu: 3200 m Rodjumrgaspfx Abhjn Električna energija: 1,1 kW Komprimirani zrak: 6 bar Potrošnja komprimiranog zraka: 5 NL/min

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Rjdpfx Abecr T N Djhjn Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Leto izdelave: 2023, Stanje: novo, TNDG manual positioner with handwheel and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Working height: 800-1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKAGING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) Redpfx Abspa Nzyjhjn