Rezkalni stroj

Friedrich Deckel FP4A

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 Lsdpfx Abju Dm E Hobehb • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Leto izdelave: 1988, Stanje: rabljeno, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with 3-jaw chuck and Multifix toolpost. Ready for demonstration under power by prior arrangement. Lhsdsma Snxjpfx Abbsb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual Lhsdpfx Aevbifgobbsb >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 1995, Universal tool milling machine Deckel FP 1 – several machines available, see pictures Model: FP 1 3-AXIS Heidenhain digital readout Price: from €9,500 excl. VAT Technical data: Lodpfx Abetdcfhobohb X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range (vertical): 250 – 2000 rpm Spindle speed range (horizontal): 40 – 315 rpm Working spindle speed steps: 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Lhedpermkfnsfx Abbeb Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: pripravljen za uporabo (rabljen), Fraiseuse universelle Deckel FP 2 NC TNC 320 / 321 Courses : x - 300 mm | y - 300 mm | z - 400 mm Vitesse en continu : 31,5 - 5000 tr/min Avances : 2-4000/min Avance rapide : 4000/min Porte-outil : SK 40 Course de la broche : 80 mm Poids de la machine : 1350 kg Vous pouvez volontiers venir voir la machine sur place. Nous pouvons organiser pour vous une expédition économique ! Ledpfxexfkm As Abbehb Vous recevrez une facture conforme. Pour les clients étrangers, une facture nette peut être établie, à condition d’avoir un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Les noms des sociétés et les marques mentionnés sont la propriété de leurs détenteurs respectifs et servent uniquement à l’identification et à la description des produits. Des écarts dans les données techniques ou des erreurs dans la description de l’article peuvent survenir et restent réservés.

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 328501, Ponudba 25366 Tehnični podatki: - Sposobnost vrtanja: 25 mm - Vpenjanje vretena: MK 3 - Hitrosti vrtalnega vretena: 100 / 205 / 345 / 440 min⁻¹, 695 / 885 / 1450 / 2900 min⁻¹ - Hoz vrtalnega vretena: 130 mm - Iztegnitev vrtalnega vretena: 260 mm - Koordinatna miza s 3 T-utorji: 580 x 240 mm - Pomik mize: X-os – 415 mm; Y-os – 155 mm - Pogon: 400 V / 0,75 / 0,9 kW - Potreben prostor: pribl. Š 900 x V 1800 x G 700 mm - Teža: pribl. 270 kg Lhedpfxexu U Suj Abbsb - Strojni primež

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Control: Deckel Dialog 11, equipped with a vise, inspection is possible. Lodpfx Abeqi D S Usbshb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system Ljdpfx Abexuppuobshb • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Lsdek S Ht Aspfx Abbohb Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki - Avtomatski vzdolžni in frontalni pomik - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje