Flow MACH 100-4020

Flow MACH 100- 4020

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Vertikalni stroj za obdelavo robov stekla z 10 skodeličnimi koluti, nastavljiv kot 0-45° dejansko prevoženih metrov: 260.000 min. dimenzija stekla: 40 x 40 mm debeljina stekla: 3 - 55 mm hitrost: 0,4 - 6 m/min napetost: 400 V 50 Hz 39 A Pedpfow U Dduox Agxjgk teža: 4600 kg

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. Pgjdpfxjh Dmams Agxjk We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Delovne ure: 4428 - Krmiljenje: CNC - Znamka krmilnega sistema: Siemens - Moč [kW]: 37,0 - Obratovalni tlak [bar]: 4137 - Premik X-osi [mm]: 6500 - Premik Y-osi [mm]: 3300 Finančne informacije Pedpfxewnidhs Agxjgk DDV: Navajena cena je brez DDV DDV/Obdavčitev po razliki: DDV je odbiten za podjetja Dostava in odkup so možni kadar koli za vse industrijske naprave Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Pgodpfx Aexzq Ncjgxek Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Podpfx Agsxgfbqjxogk Lokacija zaloge: Stranka

Stanje: rabljeno, Profesionalni pralnik zabojnikov NOWICKI MP-300 je naprava, zasnovana za intenzivno uporabo v živilskopredelovalnih obratih, mesni industriji, ribištvu in mlekarnah. Zaradi robustne konstrukcije in velike kapacitete do 300 zabojnikov na uro je stroj idealen za uporabo povsod tam, kjer sta higiena in učinkovitost na prvem mestu. Pgedpsw Rdktefx Agxok

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Pjdswg Takepfx Agxjgk Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Pgedpfjtrvzxsx Agxjk Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 28.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 420 mm, pomik osi Y: 330 mm, pomik po osi Z: 240 mm, največja hitrost vretena: 5.000 obr/min, VMC 300 krmilnik Siemens 810D Pgsdpswlpb Ujfx Agxek SK40 12 orodnih mest v dobrem stanju popolnoma delujoč

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Podpst Hw H Ejfx Agxjgk Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!