Prekucnik

Fliegl TSK 100 4,5m

Further Information
Chassis Central Axle Tipping Trailer
Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support
Gear support leg at the front
Foldable rear support
2 wheel chocks with holders
Steel underrun protection
Full-width rear mudflap (not with forklift holder)
Quarter-shell mudguards
Lockable storage compartment for loading ramps underneath the load bed
Podpfji Ri Eijx Aafsgu
1 pair of ramps, 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (ramp hooks at the rear)
Central axle trailer coupling
Drawbar with certified 40 mm towing eye
Drawbar height adjustable via spindle, max. adjustment range 300 mm
Axles & Suspension
GFA or BPW axles (at manufacturer's discretion), with tapered roller bearings and S-cam brakes
Axle/chassis laser aligned to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and automatic axle load equalization (rocker balance)
Wheels and Tyres
235 / 75 R 17.5 as per manufacturer's choice
Steel rims, factory silver
Braking system
2-line compressed air braking system, color-coded lines for easier service
Manual spindle parking brake
Integral air reservoir
ABS and ALB, with ABS socket at front, including connecting cable
Note: The trailer may only be towed by trucks that ensure ABS functionality!
2 non-interchangeable coupling heads at front, incl. connecting lines to towing vehicle
Electrics
24 V system, multi-chamber rear lights, side-mounted amber LED lighting
2 white front marker lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at the front, incl. connecting cable
Hydraulics
Three-way tipping system, hydraulic multi-piston press with lift limit and safety wire
Low-pressure cylinder up to max. 170 bar, no throttle (to be retrofitted to the truck if needed)
Hydraulic connection with SVK plug NW 10/3, incl. hose
Operated hydraulically via truck PTO
Tipping Body
Robust tipping body with 4 mm steel floor, steel side boards, continuous and fold-down side walls (non-swiveling), no lower central locking. Rear corner stanchions removable, rear wall fold-down and swiveling, lower central locking.
Platform length approx. 4,500 mm, side walls with 5 bottom hinges
Platform width 2,420 mm
5 pairs of lashing rings in the floor, each rated 5 t
Operating Instructions
Specified gross weight is technically possible, but due to type of cargo and compliance with permissible axle, support, and kingpin loads the maximum gross weight may not be achievable. (Poor driving and tracking behavior may occur due to improper load distribution)
Registration/Country Plates
Country of registration: Germany
With Dekra inspection and certificate (per §13 EG-FGV)
24/7 service hotline
Prepared for single-line license plate holder
ECE R 048 compliant contour marking with reflective strips, white sides and red rear
Paintwork
Frame hot-dip galvanized including passivation, 15-year warranty against rust-through
Sideboards/body RAL 9010 pure white
Note: Tipping body interior is only primed unless painted version ordered!
Attention: Archive photos shown.
With 5 m body ALSO available IMMEDIATELY!

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.