Fisher Scientific FB120 ultrazvočni dezintegrator

Fisher Scientific FB120

Stanje: rabljeno, prevoženi kilometri: 226.206 km, moč: 235 kW (319,51 KM), prva registracija: 10/1981, vrsta goriva: dizel, število sedežev: 27, vrsta prenosa: samodejen, barva: bela, zavore: retarder, Oprema: klimatska naprava, kopalnica, parkirni grelec, vgradna kuhinja, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a unique prototype. Nevertheless, it effectively served as the foundation for two other special high-deckers: the S 215 HDS and the S 216 HDS, which would soon bring many new customers to Kässbohrer. Additionally, this coach introduced the "S" designation, standing for "Super," as these new high-deckers lived up to that name: with a height of 3.63 meters, the elevated passenger compartment provided even more space, allowing for additional luggage capacity (16 cubic meters) and more service amenities. Additional tanks could also be accommodated with ease. Regardless of which of the two Super-Setras an operator selected, the fascinating engineering aspect of both Ulm-built models was that, except for the front section, they were 100% constructed from the modular components of the 200-series and shared identical fittings with the other Setra touring coaches. The 216 HDS offered space for up to 16 seat rows. In direct comparison, the version with underfloor cockpit provided even more room. With the Setra SG 221 HDS, Kässbohrer had a vision, but the ban on operating articulated coaches for tourist trips through France led the Ulm team to shift focus to non-articulated vehicles. From then on, the SG 221 HDS was used as a demonstration and information vehicle at trade fairs and conferences. With its generously equipped onboard kitchen, it became a central meeting point for representatives and customers. +++ One-of-a-kind Vehicle +++ +++ ATTENTION!!!!! +++ +++ Restoration Project Only +++ +++ Not Roadworthy / Engine Starts Only +++ Engine: Mercedes-Benz Mileage: As per odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeper seats ---- Safety & Equipment: - Retarder - Fog lights Passenger Area: * Auxiliary heater * Air conditioning * Tables * Curtains * Adjustable air vents * Reading lights * Double glazing * Footrests * Draft system with bar counter and large kitchen in rear section * Separate bar area in central section * Front lounge convertible to sleeping area * Refrigerator + additional unit * Microwave * Rear WC * Driver's microphone Exterior: - Power steering - Tachograph with chart - Sleeper cabin Cpjdpsrmlp Esfx Afnjw - Driver's door - Roof hatches/fans/vents Other: - German vehicle documents - Dimensions: Length 18.00m, Width 2.50m, Height 3.95m - Twin tyres - Tyre condition front axle approx. 40% - Our internal vehicle number: 7271 Errors excepted. Images and description may differ from the actual vehicle. Over 180 vehicles constantly available in stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 167 h, For sale: remotely controlled, cordless mower available at a bargain price. Ideally suited for challenging conditions such as steep roadsides or hazardous locations. (Watch the video) Equipped with four-wheel drive and a long-range remote control. Capable of mowing up to 1,500 sqm per hour. - Special winter pricing – in spring the price will be 20% higher! We therefore recommend purchasing now. The machine is, of course, fully functional and ready for immediate use. - Direct from a liquidated company in Sweden. Cedpevv Hi Eofx Afnopw The original purchase price was over 25,000 EUR. Four-wheel drive, remote control operation – everything is 100% operational. The mower was purchased in December 2014 and first put into use in spring 2015! Key data: Performance / Consumption - Engine: Briggs & Stratton 950 - Displacement: 223 cm³ - Fuel tank capacity: 4 L / 1 gallon - Fuel: Unleaded petrol - Transmission: Hydrostatic - Speed: 0 – 4 km/h - Steering: wheel-based - Blade: 1 rotary - Cutting width: 56 cm / 22 inches - Cutting height: 4 – 9 cm / 2 – 4 inches - Manual clutch - Mulching kit option - Max output: up to 1,500 m²/h - Fuel consumption: 1 L/h - Maximum slope: 30 degrees / 58% - Dimensions: 1040 x 900 x 600 mm - Weight: 125 kg Transport available within Poland and the European Union!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. Cedpfx Aevug Dysfnopw By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 248 h, največja hitrost: 50 km/h, velikost sprednje pnevmatike: 600/70 R30 | 0%, velikost zadnje pnevmatike: 710/70 R42 | 0%, velikost pnevmatike: 710/70 R42, število postelj: 43, Pnevmatike (spredaj): 600/70 R30, Pnevmatike (zadaj): 710/70 R42, Obratovalne ure: 248, Prva registracija: 17.12.2024_____Osnovna oprema/tehnični podatkiMOTOR Največja moč 180/245 kW/KM (ISO 14396) Največji navor 1100 NmNajvečja moč z upravljanjem moči 194/265 kW/KMNajvečji navor z upravljanjem moči 1178 Nm6-valjni, 7,4l AGCO Power - 74 LFNT-5D, CR, 4VEmisijski standard (DOC+SC+SCR) brez recirkulacije izpušnih plinov, stopnja 5Elektronsko upravljanje motorja z Vistronic ventilatorjemSpomin zahtevane hitrosti motorjaPowercore motorni zračni filter z grobim ločevanjem nečistočEasyCare hladilni paketDodatni pred-filter za gorivo z ločevalcem vode500-litrski rezervoar za gorivo Codpfx Afsvv Dp Njnjpw

Stanje: rabljeno, Leto izdelave: 2019, Oprema: zavorni sistem na stisnjen zrak, Heated front and rear windscreen, additional equipment mounting / Cpsdpsr Ilxvofx Afnew

Stanje: novo, Leto izdelave: 2025, moč: 45 kW (61,18 KM), Stroj je sposoben obdelovati različne vrste odpadnih palet s kapaciteto do 90 palet na uro. Odlikuje ga edinstvena zasnova, ki združuje tako območje za predhodno rezanje kot območje za končno rezanje, kar omogoča zmanjšanje materiala na velikost delcev do 10 mm. Csdetpwrmopfx Afnopw Ta hibridna tehnologija omogoča učinkovito obdelavo velikih količin odpadnih palet. Poleg tega je stroj opremljen z: - magnetnim ločevalnikom za odstranjevanje kovinskih delcev - trakom za gladko upravljanje in transport končnega materiala.

Stanje: rabljeno, Leto izdelave: 2024,

Stanje: novo, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Centre distance: 2,000 mm Centre height: 330 mm Cjdpfjfbbx Rex Afnepw Swing diameter over bed: 660 mm Swing diameter over gap: 900 mm Swing diameter over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range (16): 25 – 1,600 rpm Longitudinal feed range (25): 0.044 – 1.48 mm/rev Cross feed range (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Quill diameter: 90 mm Quill travel: 235 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3,630 x 1,200 x 1,520 mm Weight: approx. 2,900 kg Features Versatile applications in general engineering, production, single-part manufacturing, etc. Central, easy-to-use control for feeds and threads using leadscrew and feed shaft Prism bed made of cast iron, induction-hardened and precision-ground Modern main spindle bearing with precision angular contact roller bearings Hardened and ground gears and shafts, including in the feed gearbox Rapid traverse for longitudinal and cross feeds as standard to reduce idle times Large spindle bore (105 mm) for workpieces with large diameters Smooth start via mechanical multi-disc clutch Electromechanical foot brake for reduced idle times Excellent cutting performance even for facing operations The machine bed is reinforced with sturdy ribs to increase rigidity and minimize vibration influences Scope of delivery 3-axis digital readout ES-12 V with LCD display Slip clutch Rapid traverse longitudinal and cross LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – max. dia. 180 mm Travelling steady rest – max. dia. 120 mm 2 centre points Motor with magnetic brake according to CE standards Foot pedal with brake function according to CE Initial fill with Shell Tellus 46 Coolant system Quick-change tool post with 4 holders Protection device for quick-change tool post Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 216 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20MS090000/007, skupna dolžina: 3.000 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 2.500 mm, skupna višina: 1.900 mm, skupna masa: 1.450 kg, lastna masa: 1.450 kg, delovna širina: 900 mm, priključek za stisnjen zrak: 6 letvica, hitrost prepustnosti: 50 mm/s, Glue Application and Longitudinal Splicing Machine For veneer thicknesses from 0.4 to 3 mm with direct gluing. With edge pre-gluing up to 5 mm. Machine has seen very little use, Sold ex works. Separate electric motors for chain drive and glue application Glue is applied to the edge of the newly fed veneer strip, increasing the bond strength. Rugged, durable stainless steel conveyor chain with articulated joints Independent temperature, speed, and pressure adjustment Glue reservoir is quick and easily accessible for fast and simple refilling or cleaning Multiple heating zones allow for individual temperature settings Integrated cooling unit extends glue reservoir service life Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Specifications: Csdpfx Aew E Rfbofnepw Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer thickness: 0.4 – 3.0 mm (up to 5 mm) Max. veneer moisture: 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heated section length: 1000 mm Max. heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 300 h, moč: 305 kW (414,68 KM), proizvajalec motorjev: izuzu, vrsta prenosa: samodejen, vrsta goriva: dizel, največja hitrost: 50 km/h, prva registracija: 01/2024, barva: rdeča, velikost sprednje pnevmatike: 600/70r30, velikost zadnje pnevmatike: vf 710/70r42, številka stroja/vozila: vkkmb770cpb325022, Oprema: dodatne luči, kabina, klimatska naprava, merilnik pridelka z GPS-om, osvetlitev, spojka prikolice, new tractor due to cessation of activity, photos available on request Cjdpfjwm Rdgjx Afnspw