Mobilni filtri za varjenje dima

Fischer EMK-1602

Stanje: novo, Leto izdelave: 2020, Tip: S 120 l Popolnoma iz nerjavečega jekla Kapaciteta lijaka: 120 litrov Enojna pogonska gred Obratovanje gredi v obe smeri Zaščitni pokrov Električna moč: 3 kW Napetost: 220 V / 50 Hz Vgradne mere stroja (v cm): Širina: 91 Dolžina: 65 Nedpsf S A Ivefx Adpjwp Višina: 87 Rok dobave: po predplačilu, en delovni dan

Stanje: novo, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate weight: 2,400 kg Total power requirement: 4 kW Pre-bending: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roller diameter: 170 mm Equipment Nwjdod Ab Haspfx Adpep • 3 rollers • Asymmetrical roller arrangement – with pre-bending • Swing-out top roller to the front • Motorized right-left control • Conical rolling by tilting the rear roller • Operation via foot pedal • Hardened rollers • Digital display See catalog at the following link:

Leto izdelave: 2022, Stanje: novo, številka stroja/vozila: RPM500_OSZ2, Robot - Polishing Machine RPM500_OSZ2 with oscillation (50 mm) and infeed (100 mm) Polishing discs diameter - 1000 mm Njdpfx Aded Dt D Iopjwp Drive power - 4 kW Extraction ports - 100 mm Two units available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, SRF Master Illustration on the left 2 m extraction arm Application area Low levels of fume/dust Occasional use Benefits Minimal repositioning of the extraction hood required Greater flexibility thanks to additional hose connection at the rear Features Nwodpfx Ajdqzbrsdpsp Safe operation with filter monitoring Extraction hood can rotate and swivel 360 degrees Push handle and cable holder Process 3-stage Filter type Disposable filter Filter surface approx. 12 m² Separation efficiency > 99% Filter material Fiberglass fleece Welding fume separation class W3 Additional filters Two pre-filters Basic data Extraction capacity max. 950 m³/h Diameter of extraction arm Ø 150 mm Length of extraction arm 2 m Diameter of suction connection Ø 150 mm Power supply 230 V / 50Hz Motor power 1.1 kW Sound pressure level 72 dB(A) Dimensions (W x D x H) 705 x 655 x 900 mm Weight approx. 71 kg

Stanje: novo, Load capacity: 30,000 kg Dead weight: 429 kg Dimensions: 2450 mm Height: 535 mm Width: 265 mm Maximum length: 4250 mm Extendable to (+ 800 JP): 6200 mm Extendable to (+ 2 x 800 JP): 8500 mm Nsdpfxed R Hvye Adpewp Warranty: 12 months Shackles: 4 + 4 pcs Extensions (1 set each, 4 pcs.): 800 JP Mounting beam for straps: 800 LKP Additional lifting eye: 800 LK Lifting eye for wide straps: 800 NKL Alignment plate: 800 TL Unwinder: 800 AR 7 Storage rack: 800 ST 2 XLift Lifting Beam – The Number 1 for All Applications Various trades and industrial sectors have different load handling requirements. Therefore, universal cross beams are, of course, available in different load ranges. Our offering extends from lifting beams with a load capacity of three tons up to lifting devices with a load capacity of up to 50 tons. The beams have the lowest possible dead weight without compromising stability and thus safety in use. Each model is easy to handle and, thanks to small hole spacings, can cover a wide range of hanging lengths. Universal lifting beams are particularly suitable for a wide variety of lifting tasks, as they can be used as beam lifting beams, spreader beams, or 4-point beams. The cross-shaped arrangement of the beams, which gives the traverses their name, also ensures that the vertical faces of the load are only minimally compressed. Adjusting the individual hole spacings is effortless, even for laypersons, making these beams outstandingly user-friendly. When used as an X-beam, a greater distance between the load and chains or slings is achieved under load. Additionally, you can acquire optional accessories perfectly matched to our XLift series, such as lifting gear.

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 004744, Extraction capacity: 1200 m³/h Fan drive: 0.75 kW Required space: 700 x 660 x 1030 mm Nsdpefm Ekxefx Adpowp

Leto izdelave: 1973, Stanje: rabljeno, Cabeçote forjador 2 golpes (2 Die 2 Blow) Nwedpsirt Thsfx Adpop 10x100 Velocidade máxima: 170 peças por minuto (ppm)

Stanje: dober (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 1.035 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, največja hitrost vretena: 14.000 obr/min, Manufacturer: KOIKE Model: HD 100 VF Year of manufacture: 2012 Double driven and double geared Remote control with inverter and variable speeds Tilting 0 – 135° Specifications Metric | US Standard Table length: 1220 mm Table width: 1220 mm Table load capacity at 50 mm: 5000 kg Table load capacity at 200 mm: 4545 kg Table load capacity at 400 mm: 3500 kg Table load capacity at 600 mm: 2900 kg Table load capacity at 1000 mm: 1850 kg Nodpfxorg A N No Adpewp Table rotation: 360° Dimensions (estimated) Length: 2000 mm Width: 1600 mm Height: 1700 mm Weight: 2400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. They do not constitute representation or contractual terms. We recommend you verify all critical details.

Stanje: rabljeno, Leto izdelave: 1976, številka stroja/vozila: 761907, General / Technical Data: Heavy mechanical swing bending machine with robust welded construction in very good condition. Working width: 2000 mm Maximum material thickness for steel ST 50: 20 mm Opening of upper beam (clamping beam): max. 475 mm Nwodpecvtbyofx Adpop Adjustability of bending beam: 200 mm, motorized height adjustment Bending angle: 130°, adjustable via electronic angle input Upper beam speed: 6 mm/sec Bending beam rotation speed: 1.25 rpm (approx. 90 sec for 90° bend) Back gauge: adjustable from 50–999 mm, motorized, with digital length display Machine dimensions (H x W x D): 3600 x 4350 x 4400 mm (without pit / with bending beam platform) Control cabinet dimensions (H x W x D): 1800 x 1200 x 400 mm Drive power – bending drive: 30 kW Drive power – upper beam (clamping beam): 22 kW Power supply: 500 Volt, 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / Special Equipment: • 5 sets of bending tools (clamping and bending bars): R 8, R 12, R 15, R 20, R 40 • Foldable back gauge • Centralized lubrication • Machine documentation Note: • Machine comes from a maintenance workshop • A foundation pit, 900 mm deep, is required for the machine. The base for the swing drive shown in the pictures is for test operation and demonstration purposes only.

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 201327/2, Suction capacity: 1200 m³/h Max. static pressure: 1350 Pa Electrical connection: 380 V, 0.75 kW Required space: 700 x 660 x 1030 mm Weight: Nedpfx Adenwmtcjpowp