Vijačni kompresor

FINI Pulsar EVO BK119-5,5-SD

Stanje: zelo dobro (rabljeno), Ansemi parallel lathe, model Mono FAP 325 ES, center distance 1500 mm, center height 325 mm, spindle bore 65 mm, motor power 18 kW, overall dimensions (mm): 3300x1200x1700 h, weight 3260 kg Hnjdpfxowcd Hmo Adkoi

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Hjdpfxed Du T Is Adkeni Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Delivery pressure: 11 bar Suction capacity: 480 cm³ Volumetric flow rate: 360 (unit missing – please specify, e.g., l/min) Hedpfjvkizgsx Adkeni Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Hnjdpfx Aspiarnsdkji Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: dober (rabljeno), ERE 1 electric transformer, 250 kVA, year 2002 Hsdpfx Ador I Sm Eokoni

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed Hnsdpsd H Hhzjfx Adksi - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. Hneded H Dr Sepfx Adksi The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Stanje: skoraj kot novo (rabljeno), Woma Kärcher topla voda s 500 bar in 27 litri, Kubota dizel 36,5 kW, 650 ur. Hjdpexwyc Dofx Adksni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GLS03227, moč: 335 kW (455,47 KM), vrsta goriva: dizel, skupna masa: 1.200 kg, Rabljen, pripravljen motor iz Sennebogen 870C. Demontiran le zaradi izvoza stroja. Hnsdpfx Adow T Riboksi

Stanje: novo, Leto izdelave: 2026, Circular saw with table, right-hand table extension, and straight and angular fence. This machine incorporates many features typically found in more expensive devices of this type. An excellent price-to-performance ratio has been achieved without compromising on quality or versatility. Machine description: This innovative circular saw combines power, precision, versatility, and compact dimensions. Designed for small woodworking shops, furniture manufacturers, and craftsmen. The machine uses solutions usually reserved for higher-end models, ensuring remarkable efficiency without sacrificing quality or universality. Supplied with a 250 x 30 x 2 mm carbide-tipped saw blade. MAXIMUM BLADE/BORE DIAMETER: 254x30 mm BLADE SPEED: 4,000 rpm BLADE TILT RANGE: 90–45° MAX. CUTTING DEPTH AT 45º: 65 mm MAX. CUTTING DEPTH AT 90º: 80 mm CUTTING WIDTH WITH TABLE EXTENSION: 750 mm MAXIMUM CUTTING LENGTH: 1,000 mm EXTRACTION PORTS: 100/25 mm TABLE DIMENSIONS: 635 x 420 mm TABLE DIMENSIONS WITH EXTENSION: 635 x 1500 mm MOTOR POWER: 2.2 kW (S1) 400V / 3.1 kW (S6) WEIGHT: 110 kg DIMENSIONS: 1450 x 1000 x 1100 mm Hsdjvxhi Eopfx Adkeni Manufacturer: Cormak