Kotni transporter, Z transporter, višina: 2.200 mm

Fimatech 1000005820, FB: 280 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 Dksdpfx Afszb Evloler • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: dober (rabljeno), Leto izdelave: 1999, Pneumatic press, manufacturer SCHMIDT, model ZHS-2/22, year 1999. Equipped with two-hand operation. Safety inspection (UVV) valid until 2023. Djdpfxsiduvco Aflskr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.445 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A1200113, potovalna razdalja osi X: 7.925 mm, pomik osi Y: 583 mm, pomik po osi Z: 360 mm, Oprema: CE označba, Naprodaj 5-osni CNC obdelovalni center FOM AXEL 5 075 za obdelavo aluminijastih in jeklenih profilov, z delovnim časom 1445 ur. Leto izdelave: 2021 Stroj je bil od novega v uporabi v naši proizvodnji aluminijastnega stavbnega pohištva. Uporabljan izključno v eni izmeni, z vretenom, ki ima le 1445 delovnih ur. Redno servisiran, v odličnem tehničnem stanju, pripravljen za takojšnje nadaljevanje dela brez dodatnih vlaganj. Specifikacija: ✔ 5 CNC osi ✔ delovna dolžina 7,5 m ✔ avtomatski magazin orodij Dedpfezdnnbex Aflskr ✔ uvoz DXF datotek ✔ brezžični čitalnik črtnih kod ✔ modul za rezanje in delitev profilov ✔ transporter odpadkov ✔ sistem za hlajenje orodij ✔ tiskalnik etiket ✔ popolna dokumentacija in oprema Prednosti: zelo nizka stopnja izrabe stroja, uporaba v enojni izmeni proizvodnje, popolna proizvodna rešitev za proizvajalce stavbnega pohištva, pergol, aluminijastih konstrukcij, fasad ter podjetja za prefabrikacijo aluminija in jekla; možnost takojšnjega zagona proizvodnje. Pogoji prodaje: ✔ neposredna prodaja ali ✔ prevzem lizinga (cesija) ob soglasju lizingodajalca Stroj je na voljo za ogled v Niepruszewu pri Poznanju. Cena na povpraševanje. V primeru interesa za prevzem lizinga ali gotovinski nakup, prosimo za kontakt +48501797109.

Stanje: rabljeno, Leto izdelave: 1979, Pressure: 10 t Throat depth: 250 mm Stroke: 400 mm Dkodpfx Afswbizyjlor Downward speed: from 100 mm/sec Upward speed: 450 mm/sec Max. distance table to ram: 630 mm Total power requirement: 5.2 kW Machine weight: approx. 1.3 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, skupna masa: 9.000 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 5.500 W, število osi: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret tool changer. If you are looking for high-quality profile machining capabilities, you should consider the Elumatec SBZ 130 CNC profile machining center we are offering for sale. Contact us for further details. Dedpfx Afoyt Hg Nslekr • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: high-speed milling spindle • Tool system: • Tool changer: turret head • Tool positions: 8

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: skyCNC 6008, potovalna razdalja osi X: 900 mm, pomik osi Y: 6.100 mm, pomik po osi Z: 270 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 8 m/min, dolžina obdelovanca (maks.): 6.000 mm, širina obdelovanca (maks.): 800 mm, premer obdelovanca (maks.): 270 mm, širina mize: 800 mm, obremenitev mize: 400 kg, skupna masa: 3.250 kg, hitrost vretena (min.): 15.000 obr/min, X 900 Y 6100 Z 270 mm 11kW (table 800) Available immediately! Dkedpfjwlqpyjx Afljr PFEIFER technology skyCNC Milling Machine 6008 – 11kW / 5 ATC (as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality For sale on behalf of a customer: An as-new 6-meter CNC milling machine with automatic tool changer. The system is immediately available and operational at the user’s facility; the sale is due to a switch to laser processing. The system can be inspected under power at the customer's/seller's site in 07819 Triptis. Key Features: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance under gantry 300 mm, max. tool length 300 mm) - Automatic 5-position tool changer, ISO40 tool holder (optional 10 tool positions available); incl. 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimal-quantity lubrication/spray cooling for cooling workpiece and tool, automatically controlled via solenoid valve by M-code - T-slot table 6000 mm x 800 mm - Incl. 3 pneumatic quick-action vices HOMGE HBV-8-300; jaw width 200 mm, clamping force up to 8.0t – infinitely adjustable; high clamping accuracy; patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for easy and quick operation, workpiece zero points freely selectable - Ethernet connection for network data transfer, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power connection: 3-phase AC 400V / 50 Hz, max. power consumption: 15 kW - Dimensions (LxWxH): 6850 x 1440 x 2163 mm, weight: approx. 3,250 kg - Compressed air connection: min. 7 bar, air filter required Sale exclusively to commercial customers only! Support and service by PFEIFER technology & Innovation Plauen

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 8.500 mm, pomik osi Y: 480 mm, pomik po osi Z: 320 mm, nazivna (navidezna) moč: 8 kVA, dolžina obdelovanca (maks.): 8.500 mm, skupna višina: 3.100 mm, skupna dolžina: 11.500 mm, skupna širina: 3.000 mm, največja hitrost vrtenja: 15.000 obr/min, skupna masa: 6.000 kg, hitrost vretena (min.): 15.000 obr/min, moč vretenovega motorja: 5.500 W, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, Elumatec SBZ 130 CNC obdelovalni center za profile s 3 osmi, ODLIČNO STANJE obdeluje jeklo, nerjaveče jeklo, aluminij, PVC itd. Stroj lahko freza, vrta, reže navoje, reže, izreza vogale Vsa obdelava pri mirujočem profilu 8-pozicijski avtomatski menjalnik orodij na revolverju Maksimalni premer rezkarja: 80 mm Maksimalni premer krožne žage: 200 mm Orodja in dodatki, posebni ključi itd. po sliki Vpenjalo orodij BT 30 Maksimalna dolžina obdelave: 850 cm, pri čelni obdelavi: 838 cm y-os: 48 cm, z-os: 320 cm Leto izdelave: 2010, hitrost vretena: 15.000 obr/min, moč vretena: 5,5 kW Teža cca 6 ton. Z laserjem, pregradno steno, zaščitno podlogo Natančnost obdelave po oseh X, Y, Z: ±0,1 mm Djdpfeziy Idsx Aflekr Poraba zraka približno 75 L, s pršilniki Ogled možen po predhodnem dogovoru. Stroj se nahaja v 91629 Weihenzell.

Leto izdelave: 2002, stanje: rabljeno, 3-osni obdelovalni center z avtomatskim 8-pozicijskim menjalom orodij za aluminijaste ali PVC profile Maks. pomik osi X: 6400 mm Maks. pomik osi Y: 400 mm Djdpozf I Ttefx Afljkr Maks. pomik osi Z: 380 mm Krmiljenje E 500 Brezstopenjska regulacija vrtljajev do 6.000 min⁻¹ Ročna upravljalna enota Minimalno količinsko pršenje 2 kotni glavi in ena hitrovrteča vretena 8 pnevmatskih prijemal za material Možen nihajni način dela Svetlobne zavese

Stanje: novo, Pressure: 10 t Lift: 180 mm Clear opening between columns: 335 x 115 mm Max. installation height: 340 mm Cylinder diameter: 56 mm Djdpfx Afeupxc Hjlskr Piston diameter: 40 mm Machine weight: approx. 0.05 t Space requirements: approx. 0.75 x 0.53 x 1.6 m This frame press is CE-certified according to the latest standards - with manual hydraulics - Cylinder can be moved laterally - 2 pressing blocks 200x250x40 mm / 200x70x40 mm, max. 30 t with M16 threaded holes and several M16 threaded bolts - 8 pressing pins, 10 - 30 mm, with quick-change adapter, max. 20 t - 2 press supports

Leto izdelave: 1994, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dvo-glava žaga Emmegi Norma 350 tu/4 s sistemom za odsesavanje in rezervnimi listi za rezanje PVC profilov. 2.500 € brez DDV. Dostava ni mogoča, potrebno prevzeti v delavnici. Dkodpfxeza Smns Aflor