Centralni filtrirni sistem za predpremaz

FAUDI AS-AV

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: Gtodpfofz Nakex Adxjt - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • V skladu s CE standardi. • Stroj lahko reže pod kotom +45, -45 ter vmesne kote. • Hitre nastavitvene omejitve za 90, 75, 60 in 45 stopinj • Ročica za pritrditev mize za vmesne kote Gtedpfx Asramzusdxjt • Pnevmatski sistem za vpenjanje profila, praktična uporaba. • Premer diamantne žage je Ø400 mm. • Standardno opremljena z merilnim in transportnim trakom (po 2,5 m na levi in desni strani) • Hladilna naprava za rezanje aluminijastih profilov • Možnost dela z digitalnim metrom OPCIJA • Valjčni transportni sistem (po 3 m na levi in desni strani)

Leto izdelave: 2020, Stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Gjdpfx Ascx R Ddedxott Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature).

Leto izdelave: 2000, Stanje: generalkompletno obnovljen (rabljeno), System for filling, cooling, and sealing suppository casting packs made of plastic. The line was completely overhauled mechanically and electronically in 2019 and is as good as new. Gtsdpefc I Haofx Adxst Before delivery, the system will be tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying Gsdpfxoiuznue Adxott - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, NOVO Hladilnik NOVO Gtedpfx Asn D Dq Rsdxjt Izvedba iz nerjavečega jekla za 20 pekačev 600 x 800 Digitalni prikaz temperature od -2 do +8°C EHT varčni sistem TOP hlajenje, pripravljeno za priklop z 20 pari letev za police Hladilno sredstvo R 290/656R A Samo pri nas: preizkušeno po DGUV V3 Priključek: 230V/450Watt Mere: 800 x 980 x 2060 mm, ŠxGxV Nov stroj & SAB preverjeno z garancijo + servisom Možnosti: Leasing in najemni servis Vzdrževalna pogodba Dostavna služba Uvedba v delo & zagon Obiščite naš veliki park pekarskih strojev!

Leto izdelave: 2025, Stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Polni se z viličarjem Gtodpfjhbg Uxex Adxst Zmanjšuje fizično obremenitev Povečuje učinkovitost

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0509, 🔧 Ključne značilnosti Neprekinjeno delovanje: Zasnovan za neprekinjeno obratovanje, kar omogoča učinkovito ločevanje trdnih snovi in tekočin. Visoka učinkovitost ločevanja: Omogoča učinkovito ločevanje trdnih delcev, olja in vode, s kapaciteto do 30 m³/h, odvisno od modela. Godswnx Ngopfx Adxett Robustna konstrukcija: Izdelan iz trpežnih materialov, kot je nerjaveče jeklo tipa 304 za dele v stiku s produktom, kar zagotavlja dolgo življenjsko dobo in odpornost proti koroziji. Napredni krmilni sistemi: Opremljen s PLC krmilnimi ploščami z uporabniku prijaznim vmesnikom za natančno upravljanje in nadzor.

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Module size: 5 mm, max. workpiece diameter: 180 mm, axial travel: 400 mm, shank travel: 200 mm, cutter diameter: 150 mm, tool speed: 2250 rpm, table speed: 250 rpm, max. tool clamping length for bore cutter/shank cutter: 236 mm/360 mm, control system: Liebherr PC-NC. Documentation available. An on-site inspection is possible. Gtedpsvpviujfx Adxjt

Stanje: rabljeno, Mechanical nailer by Wursten & Dietz. Prepared for nailing ice skates. The machine is sold as is. Gsdpelvripefx Adxott