Robota M-420I A05B-1040-B201

Fanuc mit Steuerung R-J3IB A05B-2474-B250

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 02/2011, skupna dolžina: 5.790 mm, skupna širina: 2.550 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 315/70R22.5, medosna razdalja: 3.550 mm, barva: rjava, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Equipment = - Traction control (ASR) - Roof spoiler - Electric windows - Refrigerator - Sun visor Ppedpfx Apowahwdjmot - Cruise control = Remarks = Scania P280 First registration: 25-02-2011. In combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide-outs. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further Information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread left: 75%; Tire tread right: 75%; Suspension: Leaf spring Rear axle: Twin tires; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg gross vehicle weight: 9,000 kg Type number: P 280 + trailer - 2 X SLIDE OUT = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the posted texts.

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 - 1400 rpm Pjdpfxetv H Uce Apmspt Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total power consumption: 35 KVA Machine weight: approx. 10 t Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Maximum arm reach: 2655 mm Controller: Fanuc R-J3IC Payload capacity: 210 kg 5 robots available, each equipped with a different end-of-arm tool. Ppjdpfsizth Hex Apmjt

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Ppjdpfxshy Tp Ds Apmst Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Pjdpot Hw T Sjfx Apmept Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Ppjdpfx Aou Uic Tepmot Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: zelo dobro (rabljeno), HSS saw blade grinding machine VOLLMER model CMS 10M Ppodpfx Asi Hchdjpmot

Stanje: novo, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other highly precise, complex 3D components. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the highly robust machine frame and rotary table deliver top quality. The user-friendly fixture system allows you to save time. Thanks to components from leading manufacturers and the use of high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. This technology reduces energy consumption and increases company profitability. The machine stands out for its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360°xn Max. vector speed: 173 m/min Max. vector acceleration: 1.73 G Positioning tolerance: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6,168 mm x 3,936 mm h = 3,700 mm Working area: 9,000 mm x 10,000 mm (safe area) Rotary table door clearance: 4,000 mm Machine weight: 16,000 kg Ppedpfx Aeg Adknopmst Cutting head: Type: 3D Focus type: Automatic Controller: CNC Siemens Sinumerik 840D SK Display: 19-inch touchscreen Filter Capacity: 2,500 m³/h – 4 kW

Leto izdelave: 2016, stanje: novo, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Pjdpfxsgwlrds Apmopt Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting Ppedpfoda Nqxsx Apmet - Full motor protection - Star handle In stock, available immediately.