žična erozijska stroj

FANUC Alpha 1iC XL

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Hodpfjdpak Rsx Agxol Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Hedexizdajpfx Agxel Workpiece probe Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Hedpfx Aged Tiu Esxol Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljene različne 3R sisteme. Sistemi so v zelo dobrem stanju in popolnoma delujoči. Ogled možen po predhodnem dogovoru. Pozicija 1 System 3R-203 rotacijski element WEDM 360° Pozicija 2 System 3R-201J adapter WEDM 90° Pozicija 3 System 3R-201J adapter WEDM 90° Pozicija 4 System 3R-201J adapter WEDM 90° Pozicija 5 System 3R-202 MiniBlock Pozicija 6 System 3R-202 MiniBlock Pozicija 7+8 System 3R-204 nastavljivi adapter po višini WEDM Pozicija 9 System 3R-218/30S seti nosilcev Pozicija 11 System 3R-602.21 ročno vpenjalno glavo Macro Pozicija 12 System 3R-294.3 primež Pozicija 15 System 3R-293.3 SuperVice Pozicija 17 System 3R-200-4J-2 470 mm System 3R-200-4J-2 470 mm Hsdpsxqn Ubjfx Agxol System 3R-200-4J-2 330 mm System 3R-200-4J-2 138 mm Pozicija 18 System 3R-239–545 0006-V01 System 3R-239–495 Pošiljanje in ogled sta možna!

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg Hsdpfoifn N Nox Agxol T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm Hjdpoylw Stjfx Agxjl • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 14.530 h, Krmilna enota Blagovna znamka: FANUC Model: 31i-Model B Glavni pogon Število osi: 3 Hodpjx D I Axsfx Agxel Ta triosni stroj Star SR-20J N je bil izdelan leta 2019. Gre za švicarski stružni stroj, zasnovan za natančnost in učinkovitost. Idealen za zahtevna obdelovalna opravila, ta model nudi robustno zmogljivost v kompaktni zasnovi. Če iščete visokokakovostne možnosti struženja, razmislite o stroju Star SR-20J N, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SECONDARY OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 7 kW WEIGHT AND DIMENSIONS Hjdpfxjxlum Ts Agxol - Space requirement: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operation hours: 26,657 h - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Part extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar magazine: FMB turbo 3-26 / 3200 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, Fast precision coordinate measuring machine and gear measurement center. Moving gantry with patented TRICISION™ technology X 900 / Y 1,500 / Z 700 Control unit B5 (retrofitted in 2021) Hsdpjv S Dk Esfx Agxsl High-resolution Leitz 3D measuring head LSP-S2 Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm Probe changer system with 8 positions Large package with probe accessories Software: PCDMIS CAD++ 2024 12-month warranty Computer, 32" monitor Installation, commissioning, and acceptance in accordance with DIN EN ISO 10360-2,4,5

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Hjdsywtwwepfx Agxel Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360