Valjčna stiskalnica za pločevino
Faccin 4HEL 2122

Name: Faccin 4HEL 2122
Brand: Faccin
Availability: InStock

Leto izdelave

2015

Stanje

Rabljeno

Lokacija

Trittau

Valjčna stiskalnica za pločevino Faccin 4HEL 2122

Prikaži karto

Podatki o stroju

Oznaka stroja:: Valjčna stiskalnica za pločevino

Proizvajalec:: Faccin

Model:: 4HEL 2122

Leto izdelave:: 2015

Stanje:: dober (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Nikolaus Otto Str. 20, 22946 Trittau, Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21708353

Posodobitev:: nazadnje dne 14.04.2026

Opis

Four-Roll Plate Bending Machine
Make: FACCIN Model: 4HEL 2122
Year of manufacture: 2015

Technical specifications

Manufacturer: FACCIN
Model: 4HEL 2122
Year: 2015
Working width: 2050 mm
Roll geometry: Linear guides
Top roll diameter: 225 mm
Lower roll diameter: 210 mm
Side rolls diameter: 165 mm
Bending force (against top roll): 100 t
Motor power: 9 kW
Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m
Weight (approx.): 4.2 t

Performance Data

Rolling capacity (full width) mm: 12
Pre-bending capacity (full width) mm: 8
Min. diameter for pipes mm: 1,125
At material yield strength N/mm²: 260

Rolling capacity (full width) mm: 8
Pre-bending capacity (full width) mm: 6
Giodpfx Afoy Atwbs Sjr
Min. diameter for pipes mm: 295
At material yield strength N/mm²: 260

Rolling capacity (full width) mm: 8
Pre-bending capacity (full width) mm: 6
Min. diameter for pipes mm: 1,125
At material yield strength N/mm²: 360

Rolling capacity (full width) mm: 6.5
Pre-bending capacity (full width) mm: 5
Min. diameter for pipes mm: 295
At material yield strength N/mm²: 360

Rolling capacity (half width) mm: 15
Pre-bending capacity (half width) mm: 10
Min. diameter for pipes mm: 1,125
At material yield strength N/mm²: 260

Equipment
- Double linear guide system for roll movement
- Extra-wide bearing blocks
- MCS dual-bearing system for roll rotation
- Extra heavy, double-supported swing-out end bearing
- Electronic parallelism system EPS
- Hardened rolls for high wear resistance and minimal sheet marking
- All rolls polished after heat treatment
- SIEMENS S7 PLC touch control
- Safety cable with emergency stop function, CE certified
- Water cooler for the hydraulic unit

All information subject to change.
A powered demonstration is available anytime in our showroom.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2007

54 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 4154 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za okroglo krivljenje pločevine - 4 valji FACCIN 4HEL-2122

Avstrija

237 km

Stroj za okroglo krivljenje pločevine - 4 valji
FACCIN4HEL-2122

Pokliči

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Godpfx Aeypbp Ref Ssir Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Poglej podrobnosti

Mali oglas

Stroj za okroglo upogibanje Faccin 4HEL 2122 CNC

Sprockhövel

812 km

Stroj za okroglo upogibanje
Faccin4HEL 2122 CNC

Pokliči

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Giedpfx Afed Eqg Hs Ssr Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: With material yield strength of 260 N/mm² Rolling capacity (full working width): 11 mm Pre-bending capacity (full working width): 8 mm From pipe diameter: 1,100 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 286 mm Standard equipment: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty swing arm bearing, double mounted Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Poglej podrobnosti

Oglašujte tukaj