Stroj za brizganje

ENGEL Victory 2460/400

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Theoretical shot volume: 4,545 cm³ Lasdjwzy N Ujpfx Aamsd • Injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticising capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / nozzle contact force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open air injection rate with accumulator (option): 1,812 cm³/s • Cylinder heating power: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Maximum opening stroke: 2,100 mm • Min./max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating capacity: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Sila zapiranja: 6600 kN Teža stroja pribl.: 45,5 t Ljdpfxow I E R No Aamsad

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; Laodpfxey Hmfyo Aamed • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 65.000 h, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has approximately 65,000 operating hours, and is in excellent condition. Contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm Lodpfx Aajx Nr Uxjmjad • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating capacity: 61.2 kW • Number of electrical connection pins: 32 • Nozzle tip radius: R35 • Centring ring diameter: 200 mm • Robot interface: Euromap 67 • Number of core pull units: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Condition: In production Additional equipment: • Robot (equipped)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 60.244 h, vpenjalna sila: 6.500 kN, premer vijaka: 105 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, Ta Engel DUO 7050/650 pico je bil izdelan leta 2013. Ima zapiralno silo 6500 kN, maksimalno volumnino vbrizga 4160 cm³ in premer polža 105 mm. Stroj je opremljen z robotskim vmesnikom (Euromap 67) in je v zelo dobrem stanju. Če iščete visokokakovosten stroj za brizganje plastike, priporočamo Engel DUO 7050/650 pico, ki ga imamo na voljo za prodajo. Za dodatne informacije o tem stroju nas kontaktirajte. • Maksimalni vbrizgani volumen: 4160 cm³ • Minimalna višina orodja: 450 mm • Maksimalna višina orodja: 950 mm • Hod odpiranja orodne plošče: 1400 mm • Dimenzije orodne plošče (Š × D): 1510 × 1440 mm • Razmak med stebri: 1100 × 960 mm Lodpfxsx Nr R Hj Aamjad • Moč motorja: 161 kW • Moč gretja: 73,9 kW • Število električnih priključkov: 32 • Polmer šobe za vbrizgavanje (na konici): R35 • Premer centrirnega obroča: 200 mm • Število jeder: 0 • Število grelnih con: 0 • Leto izdelave: 2013 • Delovne ure: pribl. 60.244 h • Stanje: zelo dobro • Stanje: v proizvodnji Dodatna oprema • Opremljen z robotom: da • Robotski vmesnik: Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 55.201 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, Tehnične prednosti stroja: - visoka zmogljivost in natančnost, - popolnoma električni in energijsko varčen, - hitri, dinamični in zelo natančni premiki zahvaljujoč pettočkovnemu vzvodnemu vpenjalnemu sistemu z vodenjem plošče z nizkim trenjem na preciznih linearnih ležajih, Lodpfx Aasxfbdxjmead - učinkovita vbrizgalna enota za izjemno hiter vbrizg, - popolna servisna dokumentacija in navodila za uporabo, - maksimalna energetska učinkovitost z dosledno uporabo servoelektričnega pogona z največjo učinkovitostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Lasdpfx Aasyc Ewxemed Injection unit Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Stanje: rabljeno, Leto izdelave: 2023, 2 x brizgalni stroji Engel VC 2460/180 tech, letnik 2023 Ledpozhudkjfx Aamead

Stanje: rabljeno, Leto izdelave: 2018, 3 x Stork brizgalne stroje Ljdpfsx Uymajx Aamead Tip stroja Zagon Starost v mesecih 4400-2150 19.12.2002 278 4400-2150 28.11.2012 159 6600-5650 01.11.2011 171

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: X 44733, Stroj za brizganje plastike | Stork S+ 4400-2150 Laodpfx Ajxwva Eeamsd - Zapiralna sila: 4400 kN - Hodenje odpiranja: 720 mm - Razdalja med stebri: 730 x 730 mm - Višina orodja: 500–1050 mm - Premer polža: 62 mm - Volumen brizganja: 951 cm³ - Električni pogon polža Ogled je možen kadarkoli po predhodnem dogovoru.