Stroj za brizganje

ENGEL Victory 1050-220 spex

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Dolžina: približno 7,95 m Ndsdpfjbruzgjx Al Deb Naprava je razstavljena Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: novo, številka stroja/vozila: 1900040028, dolžina transportnega traku: 1.700 mm, širina transportnega traku: 440 mm, hitrost transportnega traku: 57 mm/s, moč: 0,18 kW (0,24 KM), vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Voran conveyor belt 1,700 x 440 mm Nsdstv E Dijpfx Al Dedb FDA compliant

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Ndjdpfx Alsyh I Emo Djb Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Nsdpfxeh Nypfo Al Djdb

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The granulate mixer is available in 6 versions: The design can be either in stainless steel or painted steel. Technical specifications: MV 2 The MV 2 enables complete mixing of the entire plastic granulate, thanks to the forced feed via the screw sleeve. Container capacity: 120 kg / 200 L Dimensions (L x W x): 700 mm x 700 mm x Height: 1050 mm / 1250 mm Ndjdpfx Ajd R Atrsl Deb - Removable screw - Mixing time control system - Extraction unit - 1 discharge outlet - Mobile frame with castors, 100 mm diameter, all with locking brakes.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Nedpfx Alex D Eccs Dodb Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 Njdpfx Alsw U N Ixj Dodb • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4 kN, premer vijaka: 70 mm, Offer details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Ndedpfx Aeu Awalsl Dsb Operating hours: 70,000 h Control system: CC200 Display language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 4,000 kN Platen size (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Max. opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power, pump motor: 45 kW Dimensions and weights: Installation space approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Oscillation dampers - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Stanje: pripravljen za uporabo (rabljen), Imamo na voljo zdrčevalni tunel BECK HV600. Ndsdpfx Alehcdhls Deb Je v celoti kompleten in deluje kot nov!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 4.515 h, nosilnost: 18.000 kg, dvižna višina: 4.500 mm, težišče tovora: 1.200 mm, vrsta goriva: dizel, tip droga: triplex, moč: 168 kW (228,42 KM), proizvajalec motorjev: Cummins QSB6.7, širina nosilnega okvirja vilic: 2.600 mm, dolžina vilic: 2.400 mm, širina vilic: 260 mm, debelina vilic: 110 mm, stanje pnevmatik: 70 odstotek, velikost sprednje pnevmatike: 14.00-24, velikost zadnje pnevmatike: 14.00-24, skupna masa: 33.540 kg, barva: modra, Oprema: CE označba, bočni pomik, centralizirani mazalni sistem, kabina, klimatska naprava, vilice za palete, === TECHNICAL DATA === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lift height: 4.5 m Mast type: Triplex Forks: approx. 2,400 mm Side shifter: Yes Drive: Diesel Transmission: Automatic (Powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic tyres Stabilisers: No Engine: Cummins QSB6.7 Emission standard: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certificate and complete documentation available Immediately ready for use and transportable Comprehensive technical documentation included Heavy-duty diesel forklift 18 tons Triplex mast with free lift Side shifter Comfort cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic power steering Continental pneumatic tyres Reversing camera Ideal for heavy industry, steel, concrete and port logistics. === CONDITION === Excellent condition – fully inspected, serviced, and tested by qualified personnel. Ndsdpeyid Iyofx Al Dob Inspection available by appointment. Tyres in good condition (approx. 70%). Machine immediately ready for work. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / plus VAT). Reliable machines from first-hand ownership with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are thoroughly inspected, CE-certified and immediately ready for work. Spare parts and technical support available upon request. === DELIVERY === Loading available upon request. Flexible shipping options depending on destination and logistical requirements. All transports are professionally organised by the Collé Rental & Sales logistics team.