ES 2550/500 KG

ENGEL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 14.674 h, premer vijaka: 45 mm, proizvajalec krmilnikov: ENGEL, model krmilnika: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a compact two-platen design, minimal footprint, and intelligent servo hydraulics for reduced energy consumption. The machine is equipped with a CC300 microcomputer control system with a 21.5-inch full HD touchscreen, as well as an advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please contact us. Additional Equipment • Mould heater: 32 control circuits, max. heating power 60 kW • Vacuum compressed air circuits: with venturi nozzle and pressure switch • Pneumatic solenoid valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: self-learning system for mould protection • Advanced material package: for thermoplastics up to 350°C, max. reinforcement degree 30% Machine Advantages Qualitative Advantages Cgsdpsx Nr Tnofx Afnop • High-precision and sensitive mould protection • Advanced control system with a 21.5" full HD touchscreen and user authorisation system Technical Advantages • Movable platen stroke: 1800 mm • Max. distance between platens: 2650 mm • Mould installation height: min. 850 mm, max. 1740 mm • High operational safety thanks to stable platen guidance and precise platen parallelism • Energy-efficient with reduced power consumption and intelligent servo hydraulics (Engel ecodrive) • Multi-circuit hydraulics for parallel movements (ejector, core pull, nozzle) Additional Information Machine still under power

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Cgedowy U E Ujpfx Afnop Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 400 kN, premer vijaka: 18 mm, skupna masa: 5.850 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: n/a, Ta Engel Insert 80V/40 je bila izdelana leta 2011. Ta vertikalni brizgalni stroj je idealen za natančne termo plastične dele. Razmislite o priložnosti za nakup tega vertikalnega brizgalnega stroja Engel Insert 80V/40. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Hode izmetalnika: 105 mm • Hode šobe: 380 mm • Premer vrtljive mize: 1200 mm • Pogon vrtljive mize: hidravlični • Pogon izmetalnika: hidravlični • Priključena moč: 22 kW • Največja odprtina 520 mm / najmanjša odprtina 185 mm Codox D Nm Eepfx Afnegp Dodatne informacije Stroj je še vedno pod napetostjo

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Stroj trenutno ne deluje, krmilna omara je nepopolna! Cgjdpfx Aoyrdzuefnep

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Zapiralna sila: 550 t Premer polža: 62 mm Razdalja med vodili V: 920 mm Razdalja med vodili H: 1020 mm Debelina orodja: 600-1050 mm Maks. hod odpiranja: 901 mm Vbrizgalni tlak: 2400 bar Cgodpfx Afjxbd R Hjnjp Vbrizgalni volumen: 749 cm3 Teža brizganca: 718 g Regulator za hotrunner: 16 x Hidravlični izmetalci jeder: 2/3 (fiksna/premična plošča) Tip: Horizontalen Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 101.500 h, vpenjalna sila: 3.000 kN, skupna masa: 19.700 kg, Hydraulic injection moulding machine from 2007. This ENGEL Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It is equipped with a robust control system featuring a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking for a high-quality injection moulding machine, consider the ENGEL Victory VC1800/300 P we are offering for sale. Contact us for more details. An identical ENGEL Victory VC 1800/300P (2008 model) with the same configuration is also available for sale. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control unit: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Max. mould platen distance: 1,500 mm • Min. mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive output: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Installed screw diameter: 70 mm Cgedpfx Afoyn Ntzjnsp • Max. shot volume (70 mm): 1,039 cm³ • Max. screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Max. injection pressure (enhanced): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Operating hours: 101,500 h • Maintenance/service history: • Complete replacement of hydraulic hoses in 2025 planned • Motor and planetary gearbox replaced in 2021 • High-pressure cylinder replaced in 2020 • Several costly main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axis travel ranges: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Part removal/quality conveyor system • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control unit (optional)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 43.775 h, vpenjalna sila: 1.200 kN, premer vijaka: 40 mm, delovna prostornina: 251 cm³, tlak vbrizgavanja: 1.300 letvica, injekcijska masa: 231 g, minimalna višina orodja: 300 mm, Machine d’injection Engel Victory 500/120 TECH (253) Équipée d’un variateur de fréquence – le moteur d’entraînement est contrôlé électroniquement. Grâce au variateur : - La vitesse de la vis d’injection est réglable en continu. - La machine consomme moins d’énergie car le moteur ne fonctionne pas toujours à pleine puissance. - L’usure mécanique et le bruit sont réduits. Cgodpfxjym Unuo Afnep - La précision de moulage est améliorée, surtout pour les détails complexes. Année de production : 2010 Fabricant : Engel Diamètre de vis [mm] : 40 Poids d’injection [g] : 231 Pression d’injection [bar] : 1300, 2020 Force de fermeture [kN] : 1200 Entraxe colonnes [mm] : sans colonnes Taille des plateaux [mm] : 740×680 Hauteur minimale du moule [mm] : 300 Type de commande : CC200 Langue : Anglais, Allemand, Suédois Heures de fonctionnement [h] : 43775 Poids [kg] : 6800 Dimensions [mm] : 5000 x 1700 Interface robot : 67 Euro Chaîne de noyau : 1x Commande de chauffage des moules : 8x Électrovanne d’air : 1x Trémie d’alimentation : NON

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel ES 3550/600 HL Tehnični podatki Letnik izdelave: 2004 Stran zapiranja: Zapiralna sila: 6000 kN Velikost plošč (v x š): 1480 x 1300 mm Min. vgradna višina: 500 mm Maks. vgradna višina: 1700 mm Odpiralna pot: 1200 mm Izmetalni hod: 250 mm Izmetalna sila: 110 kN Vbrizgalna stran: Premer polža: 80 mm Prostornina hoda: 1960 ccm Specifični tlak vbrizga: 1730 bar Dolžina polža: 22 l/d Cjdpfsx Up Umjx Afnegp Dozirna pot: 390 mm Število grelnih con: 6 Dizni hod: 700 mm

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 70 mm Shot weight in polystyrene: 687 g/PS Clamping force: 3,000 kN Cgodpfxowftr Ds Afnsp Approx. machine weight: 19.4 t From series production Preheating unit and air soaking unit are not included in the package!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 65.000 h, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has approximately 65,000 operating hours, and is in excellent condition. Contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm Csdpfox Nr Uxex Afnsgp • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating capacity: 61.2 kW • Number of electrical connection pins: 32 • Nozzle tip radius: R35 • Centring ring diameter: 200 mm • Robot interface: Euromap 67 • Number of core pull units: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Condition: In production Additional equipment: • Robot (equipped)

Stanje: dober (rabljeno), Leto izdelave: 2005, Sila vpenjanja: 500 t Premer vijaka: 80 mm Tip: Horizontalen Pogon: Hidravlični Enota za zapiranje: Zapiralna sila: 500 t Odpiralni hod: 1260 mm Razmak med veznimi palicami (H×V): 900×800 mm Cjdpfx Afex H Au Rsnogp Velikost plošče (H×V): 1270×1200 mm Brizgalna enota: Premer polža: 80 mm Maks. brizgalni tlak: 1829 bar Brizgalna prostornina: 1433 cm³ Teža brizga (PS): 1304 g Električna oprema: Napetost: 400 V / 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 618 cm³, tlak vbrizgavanja: 2.183 letvica, injekcijska masa: 562 g, minimalna višina orodja: 400 mm, hod izmetalca: 180 mm, Engel VC 1350/200 Tech Zapiralna sila: 200 ton Leto izdelave: 2007 Teža: 14.200 kg Dimenzije (d x š x v): 6,3 x 1,9 x 2,3 m Vbrizgalna enota: .../1350 Premer polža: 55 mm Vbrizgalni volumen: 618 cm³ Vbrizgalna teža (za PS): 562 g Specifičen pritisk vbrizga: 2183 bar Sistem zapiranja orodja: 200/... Dimenzije orodnih plošč: 860 x 570 mm Montažna višina orodja: 400 mm Odpiralna pot: 750 mm Maksimalna razdalja med ploščama: 1150 mm Izmetna pot: 180 mm Izmetalna sila: 80 kN Oprema: - 2 × hidravlični jedri na gibljivi plošči Cjdoynzukepfx Afnsgp - Pnevmatski ventil - 8 področij vročih kanalov - 8-conski rotameter

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 800 kN, premer vijaka: 35 mm, injekcijska masa: 140 g, Hidravlični stroj za brizganje plastike iz leta 2021. Ta Engel Victory 320/80 spex ima zapiralno silo 800 kN in hod odpiranja 450 mm. Stroj ima maksimalno razdaljo med ploščama 750 mm in minimalno višino orodja 300 mm. Če iščete visokokakovostni stroj za brizganje, vam priporočamo Engel Victory 320/80 spex, ki ga imamo naprodaj. Za več podrobnosti nas kontaktirajte. • Hod odpiranja: 450 mm • Maks. svetla odprtina: 750 mm • Min. višina orodja: 300 mm • Velikost pritrdilne plošče (D x V): 670 x 600 mm • Razmak med vodili: brez vodil (N/A) • Volumen vbrizga: 154 cm³ • Tlak vbrizgavanja: 2.040 bar Codpfoymawuox Afnogp • Krmilni sistem: CC100 / CC200 / CC300 (odvisno od letnika)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 76.000 h, 1,0 kos rabljeni stroj za brizganje plastike Proizvajalec: KRAUSS MAFFEI Tip: KM300-1900C2 Leto izdelave: 2005 Zapiralna sila: 300 ton Razmik stebrov: 630 x 630 mm Premer polža: 60 mm Največja prostornina vbrizga: 754 cm³ Teža brizganega dela: 679 g/PS Krmiljenje: MC5 Oprema: 2x izvlek jedra Vmesnik za robota Merjenje notranjega tlaka orodja 24-consko upravljanje vročih kanalov Vmesnik za temperirno napravo Cgsdpfx Afjxyq S Usnsp Približno 76.000 obratovalnih ur

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 69.000 h, Funkcionalnost: popolnoma funkcionalen, Here we offer a well-maintained injection molding machine. We are also happy to accept well-maintained machines manufactured from 2005 onwards as trade-ins. Please offer us your surplus machines. Of the following machine, we have several identical models in stock, all equipped with Geiger robot removal devices. Jnk0nj0d Manufacturer: Engel Model: Victory 200/80 Tech Year of manufacture: 2006 Controller: CC 200 Extras - Installed languages: German, English - 25 mm screw (wear and corrosion protected) - CC200 controller - Enlarged clamping plates (B-plates) - Minimum mold height 250 mm - Maximum platen distance 700 mm - Quality diverter / PD protocol + graphic display - 5x CEE 400 V / 3x Schuko 230 V - 4 freely programmable inputs and outputs - Handling interface Euromap 12 - Master computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / Year: 2005) - Without material hopper or conveying device Clamping Unit Clamping force: 80 t / 800 kN Tie bar spacing: tie-bar-less Clamping plate dimensions: 730 x 600 mm (H x W) Platen distance: 700 mm max Mold installation height: 250 mm min Opening stroke: 450 mm Injection Unit Screw diameter: 25 mm Stroke volume: 69 cm³ Injection pressure: 2090 bar / 2400 bar (increased) Csdpem Nclvjfx Afnjgp Weight: 5,200 kg Dimensions: 4.00 m x 1.40 m x 2.00 m (LxWxH) Available ex our warehouse in Hanover / Germany, loaded free onto buyer’s truck or delivered free to destination against freight reimbursement. Inspection under power possible. If a manufacturer-certified technician commissions the machine, the customer receives a full warranty until successful commissioning. Beyond commissioning, no further warranty or guarantee is given. Age- and usage-related wear is accepted. Costs for the manufacturer’s service technician or any subsequent certified electrician are borne by the customer. About our company and the machines we offer: - We only sell machines that we have purchased from ongoing production, stored at our warehouse in Hanover - All offered machines are inspected and tested prior to disassembly - We do NOT sell insolvency goods – we are NOT brokers dealing with third-party property. - All machines come from successful companies for whom maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse