Agregat + valj 330/35 mm

Engel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, vpenjalna sila: 800 kN, premer vijaka: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. It is a vertical injection molding machine that offers a reliable solution for precision molding applications. Take advantage of the opportunity to purchase this Engel Insert 200V/60 rotary vertical injection molding machine. Contact us for further information. Screw diameter: 25 mm. 1.) Clamping Unit Clamping force: 600 kN Opening stroke: 338 mm Ejector stroke: 105 mm Ejector force: 20.1 kN 2.) Drive: Drive power of pump: 15 kW 3.) Injection Unit 1 Screw diameter: 22 mm 25 mm 30 mm 35 mm Max. shot volume: 53 cm³ (22 mm) 69 cm³ (25 mm) 99 cm³ (30 mm) 135 cm³ (35 mm) Max. screw speed: 480 rpm (for all diameters) Current screw speed: 480 rpm (for all diameters) Injection volume: 80 cm³/s (22 mm) 104 cm³/s (25 mm) 149 cm³/s (30 mm) 203 cm³/s (35 mm) Increased injection rate: 53 cm³/s (22 mm) 68 cm³/s (25 mm) 98 cm³/s (30 mm) 134 cm³/s (35 mm) Nedsx D H Awepfx Abbskt Specific injection pressure: 2221 bar (22 mm) 2090 bar (25 mm) 1451 bar (30 mm) 1066 bar (35 mm) Increased specific injection pressure: 2402 bar (22 mm) 2404 bar (25 mm) 2205 bar (30 mm) 1620 bar (35 mm) Nozzle stroke: 530 mm Nozzle contact force: 28.3 kN

Stanje: dober (rabljeno), Leto izdelave: 2015, vpenjalna sila: 2.200 kN, Oprema: dokumentacija / priročnik, Krmiljenje: CC300 Zapiralna sila: 220 t Vbrizgalna enota Premer polža: 45 mm (S8 geometrija polža G1, LD20) 30% GF Prostornina šusa: 318 cm3 Tip: Horizontalna Pogon: Hidravlični Zapiralna enota Min. višina orodja: 300 mm Maks. odprtje: 758 mm Oprema: Euromap 67 Krmiljenje ogrevanja orodij – 8 con 2x pnevmatski ventil 4x hidravlični ventili 4x jedrni vleki Wittmann W818-4597 na voljo Nsdpex H Awlefx Abbskt Popolni podatki o stroju na zahtevo.

Stanje: dober (rabljeno), Leto izdelave: 1992, Zapiralna sila: 500 kN Premer polža: 30 mm Teža: 3.200 kg Takoj na zalogi Nkjdevygh Nopfx Abbst

Stanje: dober (rabljeno), Leto izdelave: 1998, Premer polža: 25 mm Zapiralna sila: 25 ton Odpiralna pot: 350 mm Teža: 2.900 kg Nksdpfxevxh Iuo Abbjt Takoj na voljo iz zaloge

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Nkodpfxjyc Ewxe Abbot Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, vpenjalna sila: 4.000 kN, Oprema: dokumentacija / priročnik, Krmiljenje: CC200 Leto: 2013 Zapiralna sila: 400 t Maksimalna dnevna svetloba: 1450 mm Višina orodja min-maks: 450-1000 mm Izmetalni hod: 250 mm Premer polža: 70 mm (S8-polž G1) Prostornina brizganja: 1501 cm3 Količina vbrizga: 319 cm3/s Specifični tlak vbrizga: 2252 bar Nkedpfjyctyzex Abbet Maks. hitrost vrtenja polža: 160 rpm Tip: Horizontalno Pogon: Hidravlični 2 jedrna vleka 16 con za ogrevanje orodja 12 vodnih tokov Euromap 67 ECODRIVE ZRAČNI VENTILI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, vpenjalna sila: 1.100 kN, premer vijaka: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 11,000 kN. Take advantage of this opportunity to purchase the Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for further information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pad): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Min. mould height: 700 mm • Max. mould height: 1,280 mm • Max. platen daylight: 3,050 mm • Platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie bar diameter: 230 mm • Max. mould weight: 30,000 kg Nkjdpfox D Hd Ijx Abbst • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) - time: 5.2 s • Dry cycle (Euromap 6) - stroke: 1,100 mm Injection Unit 1 • Screw diameter: 135 mm • Dosing stroke: 570 mm • Max. shot volume: 8,159 cm³ • Max. screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticising rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticising rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Oil capacity: 1,600 l Weight: • Net weight (clamping unit / injection unit): 62 t / 18 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Engel Insert 80V/80V/100 2F / 2-C Holm-free Machine, Vertical / Excellent Technical Condition Year of Manufacture: 2007 Injection Unit: Screw Diameter: 2 x 25 mm Nkedeyctm Uepfx Abbst Shot Weight: approx. 49 g Injection Pressure: 1214 bar Dosage Volume: 54 ccm Clamping Unit: Clamping Force: 100 t Tie Bar Distance: 0x0 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Control for hot runners x 12 Infrared safety light curtains Both thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by Engel's authorized service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection Unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dose volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - bimetallic Machine has been serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Nkjdpfx Absyctmzobst Pump/motor: 18.5 kW Heating power: 9.2 kW Total power: 27.7 kW All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engel Victory 500/110 Tech Ecodrive with Sepro S5.15 Robot / Hybrid Machine / Operating hours: approx. in automatic mode Year of manufacture: 2017 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 225 g Injection pressure: 2029 bar Nodpoyctmusfx Abbjkt Dosage volume: 251 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touchscreen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-efficient and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hotrunner zones x 8 Injection unit hardened - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Sepro S5.15 robot Year of manufacture: 2016 5-axis robot: 3 axes driven by servo motors (electric); Axis A and C - pneumatic Touch control panel Robot with adapter and safety housing Robot purchase at extra charge Dimensions: Weight: 6,800 kg Length/Width/Height: 4.90x1.50x2.00 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: On request