Stroj za brizganje več kot 5000 KN

ENGEL ES 11050/900 Duo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 Ton RAM STROKE: 1,500 mm TABLE SIZE: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 Ton BLANKHOLDER STROKE (ram side): 200 mm Nedpfx Ajvm Eixjlield FAST APPROACH SPEED: 220 mm/sec BLANKHOLDER CAPACITY: 600 Ton CUSHION STROKE (ram side): 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm FRONT OPENING (distance between uprights): 5,000 mm TOTAL WEIGHT: n.a.

Stanje: dober (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 4.230 mm, pomik osi Y: 1.950 mm, pomik po osi Z: 750 mm, dolžina mize: 4.000 mm, širina mize: 1.250 mm, obremenitev mize: 11.000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double linear guide and flat guideway design Automatic head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance spindle nose to table: 213–1093 mm Distance spindle center to table: 130–… mm Horizontal head indexing: 5° x 72 positions Heidenhain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, Huron type X-axis travel: 4230 mm Nledpfx Alexf E Twjisd Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg X-axis feed rate: 12,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is presented in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute any representation or contractual terms. We recommend you verify all critical details.

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 Nlodpjuhhp Ssfx Alied - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Nsdjug Ty Hepfx Alield Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: rabljeno, Leto izdelave: 2022, Kartonirka vključno z napravo za vroče lepljenje. Naprava ima malo obratovalnih ur. Primerna je predvsem za izdelke, ki jih je mogoče vstaviti v karton s strani. Njdpfsvb E Evsx Aliold

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 Nljdpfxst Hw S Ij Alied with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm Nlodjtrya Ropfx Alied - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Still in operation until week 11 Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package Nodorp Dyrepfx Alijld - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: rabljeno, Leto izdelave: 2007, dolžina zabojnika: 40 čevelj, barva: zelen, skupna masa: 26.735 kg, lastna masa: 3.745 kg, prostornina tovornega prostora: 67,7 m³, širina tovornega prostora: 2.352 mm, dolžina tovornega prostora: 12.032 mm, višina nakladalnega prostora: 2.390 mm, Dear Sir or Madam, Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Shipping containers are wind- and watertight large-capacity units for transporting goods by sea, land, or air freight. The ISO-standardized containers can be loaded, unloaded, and stacked quickly and easily. _____ This listing is for a: 40-foot shipping container Nlodpfx Aleh Hnagoijd _____ Our containers feature: ✅ Quality-inspected ✅ Valid CSC plate (container safety certification) ✅ Painted green (custom color available) ✅ Wind- and watertight ✅ Odor-neutral _____ Container dimensions: External: L 12192 mm x W 2438 mm x H 2591 mm Internal: L 12032 mm x W 2352 mm x H 2395 mm Door opening: H 2340 mm x W 2292 mm Volume: 67.7 m³ Euro pallets: 25 Additional specifications: Tare weight: 3,745 kg Payload: 26,735 kg Gross weight: 30,480 kg Intended cargo: Dry cargo _____ ⭐ Extra services ■ Professional, free consultation ■ Transport and delivery with or without container unloading can be arranged for an additional fee ■ Steel frame, stainless steel walls, and aluminum floor ■ Custom paintwork possible (RAL colors) ■ Lighting installation and electrical equipment available ■ Access ramp on request ■ Container support legs available ■ Drivable with pallet jack and forklift _____ ■ Prices are net, excluding VAT ■ Inventory changes daily, please feel free to request a quote ■ Images shown are sample photos _____ If you have any questions or requests about containers, or if you would like a non-binding quote, please call us or send your inquiry. We also look forward to your visit to our container depot at the Port of Hamburg. _____ *Important notice: You can access the legal notice, information and link to the EU Commission’s online dispute resolution platform, our terms and conditions with customer information, privacy policy, cancellation policy, and sample cancellation form by clicking on “Legal Information.” This ad is intended solely as a basis for subsequent contract negotiations. It does not constitute a binding offer or invitation to submit such. If the product has aroused your interest, please send us a non-binding message by [email], [phone], [fax], or [letter] to the contact details listed under "Legal Information," or [via the “Send Message” function], including your [email address], [fax number], or [postal address]. We will then send you a binding offer together with our terms and conditions, cancellation policy, and sample cancellation form.

Stanje: dober (rabljeno), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, compressor, motor-compressor, cooling machine, cooling aggregate - Manufacturer: Bitzer, compressor motor-compressor - Model: BHS 592 S - Power: 3 kW / 1450 rpm - Displacement: 22.14 m³/h - Max. operating pressure: 24.5 bar - Quantity: 2x cooling aggregates available - Price: per unit - Dimensions: 550/315/H390 mm - Weight: 88 kg Nledpfx Asguzr Helied