Brizgalni stroji - večbarvni

Engel ENGEL DUO 2460H/860W/1100WP COMBI, 2021

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Nodpfxov S E Dge Aarslc Request technical specifications.

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Clamping force: 500 kN, heating capacity: 4.9 kW, connected load: 19.9 kW, operating hours: 57,024 h, equipped with handling system and conveyor belts, without dosing unit. Nodpfjmrri Dox Aarelc

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 19.000 h, Funkcionalnost: popolnoma funkcionalen, 2019 HELLER H6000 CNC Twin-Pallet Horizontal Machining Center CNC Horizontal Machining Center with Twin Pallet Low operating hours, single-shift machine, excellent condition Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC Horizontal Machining Center Pallet system: Twin pallet / 2-pallet system Serial number: MXXXXX (available upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel axes: X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Maximum spindle torque: 2,292 Nm at S6 / 40% duty cycle Spindle interface: HSK 100A Automatic tool changer: 50 stations Maximum tool diameter: 280 mm Maximum tool length: 600 mm Maximum tool weight: 25 kg Condition: Njdoy S S Hyjpfx Aarjlc The machine is in excellent condition, has low operating hours, and can be inspected immediately. The machine is available at short notice.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, MAZAK INTEGREX i-250H S Najv. premer obdelave: 670 mm Nljdpfx Aaszdkr Aersc Najv. dolžina obdelave: 1.011 mm Najv. hitrost rezkanja: 12.000 min⁻¹ Najv. hitrost vretena: 5.000 min⁻¹ Najv. premer palice: 65 mm Stroj je opremljen z: - CNC krmiljenjem Mazatrol SmoothAi - Magazinom za kratke palice IRCO - Integriranim robotskim sistemom TA20/200 - Zalogovnik orodij za 112 orodij (HSK) - Trijelastični vpenjalni tulec za glavno vreteno, premer 254 mm - Trijelastični vpenjalni tulec za drugo vreteno, premer 254 mm - Tool Eye (samodejno merjenje orodij) - C-os - Y-os - B-os - Proti-vreteno s polno funkcionalno C-osjo - Vmesnik za magazin palic - Avtomatski izmetavalec kosov - Osnovni paket za 5-osno obdelavo - Priprava za večkratne in Flash Tool nosilce orodij - Priprava za Mazak Monitoring System B - Visokotlačna črpalka 70 bar - KNOLL kompaktni filtrirni sistem KF400/2300

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, We offer you: Nledey U Hlpepfx Aarec Universal CNC machining center Manufacturer: DMG MORI Model: DMC 80 FD duoBlock Year of manufacture: NEW Control: Celos with Heidenhain TNC 640 Technical data: Travel paths: X-axis: 800 mm Y-axis: 1050 mm Z-axis: 850 mm Main spindle: Tool holder: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool pockets: 123 positions Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist extraction system - Chip conveyor - Swiveling viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine at the loading station with 15-inch TFT display - ICS coolant system, frequency controlled 10 bar – 80 bar / 31 l/min through spindle center (AD) - Rinsing gun for chip cleaning - Cooling device with compressed air through spindle center - Optical infrared touch probe Renishaw PP60 (OMP 60) - Tool measurement in the workspace Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS Spindle Growth Sensor, ICS flow monitor - Condition Analyzer - proTIME - 4-color signal lamp - Operating mode 4 - Precision package - Electronic handwheel - Energy meter for CELOS - Emergency power failure safety package - L-probe package 2 (Renishaw) / L-measurement Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, vpenjalna sila: 1.200 kN, skupna širina: 2.200 mm, skupna višina: 2.065 mm, skupna masa: 8.450 kg, največja dolžina izdelka: 5.259 mm, Hydraulic injection molding machine from 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-barless design ensuring efficient operation. It is equipped with a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking for a high-quality injection molding machine, the Engel Victory 120 BMG we offer for sale is worth considering. Contact us for more details on this machine. • Tie-barless design • Machine hours: operating hours 2,767 h; estimated actual runtime ~200 h (never used for regular series production) • Oil filling: 300 L • Power connection: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Clamping platen size: standard Euromap • Mold height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: plate ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mold separated • Flow controller: 0-10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote maintenance: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Maximum payload: 12 kg • Travel paths: Z 1,160 mm; X 600 mm; Y 900 mm • C-axis: pneumatic 0-90°, 30 Nm Nlodpfxey Ib Aie Aarec • Maximum system height: 3,600 mm • Min. deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Maximum temperature: 160 °C • Heating capacity: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50-200 kHz • Melting chamber: max. ingot weight 100 g No plastic extruder included!

Stanje: novo, Leto izdelave: 2025, Vpenjalna sila: 1600 t Premer vijačnega bata: 70 mm Masa brizga: 1490 g Razdalja med stebrički V: 1420 mm Nlsdpfxsy Umpuj Aarjc Razdalja med stebrički H: 1870 mm Prostornina brizga: 1232 cm³ Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 7.148 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 252315, vpenjalna sila: 17.000 kN, premer vijaka: 120 mm, delovna prostornina: 7.729 cm³, minimalna višina orodja: 800 mm, izmetalna sila: 230.000 N, hod izmetalca: 300 mm, odmični hod: 2.550 mm, dolžina plošče: 2.420 mm, širina plošče: 2.170 mm, pritisk: 2.300 letvica, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, For sale: a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and items with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1,700 tonnes) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection rate: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum platen spacing: 3,350 mm - Platen dimensions: 2,420 × 2,170 mm Nodpfx Ajy Tuhiearelc - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive energy-saving servo hydraulics - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pullers - Ceramic heaters - Cylinder insulation - Ecograph / ecobalance system - MES interface preparation – EUROMAP 77 / OPC UA - Full set of Euromap interfaces - Advanced mold cooling - Special configuration for automotive industry - Documentation in Polish - Special industrial ENGEL painting Set includes ENGEL VIPER 60 RC300 Integrated robot Complete production automation integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 belt conveyor included - Full set of safety guards

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, vrsta laserja: vlakenski laser, laserske ure: 9.000 h, laserska moč: 500 W, potovalna razdalja osi X: 300 mm, pomik po osi Z: 400 mm, vrsta hlajenja: zrak, leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Do you want to manufacture complex and lightweight aluminium components? - Do you require part sizes up to 400mm? - Do you want to produce aluminium parts with high quality and excellent metal 3D printing surface finish? - Are you looking for a solution that works IMMEDIATELY and is production-ready? Purchase a TruPrint 3000, which is still currently integrated into our production and operated exclusively with AlSi10Mg. - You will receive a validated AlSi10Mg process with two highly practical parameter sets (High Speed and High Density) - The system is ready for immediate use! Extensive Accessories - Vacuum conveyor and sieve complete the infrastructure for efficient production. - Ideal for large powder quantities - Availability approx. from Q3/2026 Technical Data LPBF System from TRUMPF Model: TruPrint 3000 G02 Year of manufacture: 2017 Serial number: S0721Q0025 Build volume: Ø 300mm x 400mm Laser configuration: 1x 500W fiber laser Laser operating hours: approx. 9,000h System operating hours: approx. 51,000h Last maintenance: 02/2024 Condition: very good Accessories: 1x build cylinder, 2x powder supply cylinders Pallet truck Year of manufacture: 2023 Condition: as new Depowdering station Year of manufacture: 2017 Condition: very good Nljdpfxoy S Amqe Aaroc Chiller Year of manufacture: 2023 Condition: like new Your Advantages - Proven system – immediate production start after commissioning - With optional accessories, a complete production system for metal 3D printed parts from AlSi10Mg - Open system – custom parameters can also be developed - Part sizes up to 400mm in reproducible and high quality - Fast ROI compared to new equipment purchase - TruPrint 3000 including chiller, pallet truck, depowdering station, new set of filters, 11x aluminium build platforms The system is currently integrated in our production and operated exclusively with AlSi10Mg. Availability from approx. Q3/2026 due to capacity expansion Interested or have further questions? Schedule a live inspection ✔ Inspect components ✔ Start directly *Data preparation software is not included in this offer!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, proizvajalec krmilnikov: BECKHOFF, model krmilnika: n/a, skupna masa: 35.900 kg, število osi: 5, Ta 5-osni NUKON Fiber Laser Extreme 30250 je bila izdelana leta 2021. Opremljena je z 12 kW vlaknastim laserjem, CNC-krmiljenjem Beckhoff in največjo velikostjo pločevine 2.500 x 12.000 mm. Stroj omogoča hitrosti do 50 m/min in je opremljen s servo pogonom. Izkoristite priložnost in kupite ta NUKON Fiber Laser Extreme 30250 laserski rezalnik z vlakni. Za dodatne informacije o tej napravi nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Emisija hrupa: 60 dB Nsdpfex U Ur Dex Aarslc • Krmiljenje: Beckhoff CNC • Prikazovalnik: 19" TFT standardni zaslon • Upravljalna konzola: vse funkcije je mogoče upravljati preko konzole • Vmesnik: ethernet • Tip pogona: servo • Ponavljivost: ± 0,35 mm (na 500 mm) • Rotacijska os: 160 obr/min • Pospešek (x, y, z): 1,5 g • Natančnost pozicioniranja: ± 0,35 mm (na 500 mm) Dodatne informacije Stroj je še vedno pod napetostjo.