Hidravlični stroj za brizganje

Engel DUO 4550/650

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.000 kN, premer vijaka: 120 mm, razmak između stupova: 1.120 mm, premer stebra: 180 mm, delovna prostornina: 5.430 cm³, Oprema: dokumentacija / priročnik, Машината е готова за товарене. Сила на заключване 900 тона, оборудвана с робот за изваждане, сушилня за бункер, товарач за бункер, дозиращо устройство за мастербач. Hodeickd Hepfx Ab Tsfr Първи и единствен собственик от производството. Цената е натоварена на камион.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Hedpjwy U E Ujfx Ab Tjfr Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar Hjdpfx Abjxvinge Tefr General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.100 kN, premer vijaka: 120 mm, razmak između stupova: 850.850 mm, premer stebra: 160 mm, delovna prostornina: 3.853 cm³, tlak vbrizgavanja: 1.137 letvica, injekcijska masa: 3.853 g, izmetalna sila: 103 N, hod izmetalca: 350 mm, moč: 92 kW (125,09 KM), Press still in production Hfedpfxswih Tqe Ab Ter

Stanje: dober (rabljeno), Leto izdelave: 2004, ENGEL DUO 4550/700 – Technical Specifications General Information: Machine Model: DUO 4550/700 Control System: CC100 Clamping Unit: Clamping Force: 7,000 kN Opening Force (with pressure pad): 510 kN Opening Stroke: 1,350 mm Minimum Mold Height: 450 mm Maximum Mold Height: 1,350 mm Daylight (Platen Open): 2,700 mm Platen Dimensions (H × V): 1,460 × 1,360 mm Tie Bar Spacing (H × V): 1,030 × 930 mm Max. Tool Weight: 9,000 kg Ejector Stroke: 300 mm Ejector Force: 90 kN Ejector Strokes (Euromap 6): 8 Dry Cycle Time (Euromap 6): 7.0 seconds Injection Unit: Screw Diameter: 90 mm L/D Ratio (Barrier): 24 Plasticizing Rate: 2,488 cm³/s Hfsdpfxsv U Dn Ns Ab Tjr Shot Volume: 2,860 cm³ Theoretical Shot Weight: 2,600 g Injection Flow Rate: 533 cm³/s Injection Pressure: 1,910 bar Specific Injection Pressure: 2,100 bar Nozzle Length: 185 mm Nozzle Contact Force: 65 kN Heating Capacity (Zone 7): 62 kW Pump Drive Power: 75 kW Oil Capacity: 1,000 liters Weight: Net Weight of Clamping Unit: 22 tons Net Weight of Injection Unit: 10 tons

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X66924, vpenjalna sila: 6.600 kN, premer vijaka: 115 mm, Used Stork IMM 6600EP-8650 injection moulding machine. Hodpfewhk Iuex Ab Tjfr The machine has been overhauled, tested, and repaired.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping force: 700 t Screw diameter: 90 mm Hsdpfswnqk Njx Ab Tefr Column spacing (vertical): 930 mm Column spacing (horizontal): 1025 mm Shot volume: 2,480 cm³ Type: Horizontal Drive: Hydraulic Engel Linear Robot ERC53/1-E

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel ES 3550/600 HL Tehnični podatki Letnik izdelave: 2004 Stran zapiranja: Zapiralna sila: 6000 kN Velikost plošč (v x š): 1480 x 1300 mm Min. vgradna višina: 500 mm Maks. vgradna višina: 1700 mm Odpiralna pot: 1200 mm Izmetalni hod: 250 mm Izmetalna sila: 110 kN Hfodpfx Asxu Hnbob Ter Vbrizgalna stran: Premer polža: 80 mm Prostornina hoda: 1960 ccm Specifični tlak vbrizga: 1730 bar Dolžina polža: 22 l/d Dozirna pot: 390 mm Število grelnih con: 6 Dizni hod: 700 mm

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 39.000 h, Year: 2011 Control type: CC200 Operating hours: 39,000 h Hsdov I Uxrspfx Ab Tofr Storage location: MECA PLASTIC Availability: Immediate Clamping force: 160 t Opening stroke: 600 mm Tie bar distance: 850 x 750 mm Platen dimensions: 850 x 750 mm Min./max. mould height: 300 mm Max. daylight between platens: 900 mm Screw diameter: 30/35 mm Screw length: 20D Shot volume: 113/192 cm³ Injection pressure: 2400/2390 bar Main motor power: 30 kW Heating power: 16 kW Clamping unit weight: 9.5 t Injection unit weight: [specify if available] Machine dimensions (L x W x H): 5.8 m x 1.7 m x 1.4 m Cores: 5 Robot interface: Yes Bi-metallic screw: Yes Additional features: 8 sequential valves, hot runner 12/1, 24 zones, Viper robot, conveyor belt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 20.000 h, Splošni podatki Teža stroja: 6500 kg Krmilna enota Znamka: ENGEL Glavni pogon Moč motorja vretena: 92 kW Hfedpfxsx D Rayo Ab Tjr Injekcijska enota Premer polža: 60 mm Volumen hoda: 315 mm Tlak vbrizgavanja: 2400 bar Hitrost polža: 220 min-1 Tlak šobe: 2400 bar Zatezna enota Zatezna sila: 6500 kN Odpiralni hod: 1400 mm Razdalja med vodili: 1100x960 mm Minimalna višina orodja: 350 mm Maksimalna višina orodja: 850 mm Dimenzije pritrdilnih plošč: 1510x1440 mm Hod izmetalca: 250 mm Sila izmetalca v/povratno: 95 kN Dodatna oprema Kapaciteta rezervoarja za olje (injekcijska enota): 500 l Maksimalna moč hlajenja (32°C vhodna voda): 29,40 kWhlad Poraba vode (32°C): 4,80 m3/h Stroj za električno brizganje Engel duo 2400/650 je bil izdelan leta 2019. Opremljen je s premerom polža 60/70/80 mm, hodom polža 315 mm in največjo zmogljivostjo vbrizgavanja 890 cm³. Zatezna sila doseže do 6500 kN, največja dovoljena teža orodja pa je 11.000 kg. Izkoristite priložnost in kupite električni stroj za brizganje Engel duo 2400/650. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Brizganje plastike