Cilindrični brusilni stroj - Zunanjost

EMAG WEISS W11 CNC

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 21.398 h, številka stroja/vozila: IntNr231185, EMAG WEISS W11 CNC SL650 – Univerzalni stroj za okroglo brušenje – Letnik proizvodnje: 2020 Na prodaj je rabljena EMAG WEISS W11 CNC SL650 – zmogljiv univerzalni stroj za okroglo brušenje s CNC-krmiljenjem. Stroj je idealen za zahtevne naloge brušenja pri obdelavi posameznih delov, prototipov in majhnih ter srednjih serij. Tehnične specifikacije stroja Proizvajalec: EMAG WEISS Tip: W11-CNC SL650 Letnik proizvodnje: 2020 Delovne ure: približno 8.850 ur vretena / približno 22.000 ur delovanja Stanje: rabljeno, dobro vzdrževano, takoj pripravljeno za uporabo Tehnični podatki Krmiljenje: CNC-krmljeno (npr. Heidenhain / Siemens / Fanuc – odvisno od izvedbe) Maks. dolžina brušenja: 650 mm (med konicami) Višina konic: približno 200 mm Zunanji premer brušenja: do približno 390 mm Maks. teža obdelovanca (brez podpore): približno 100 kg (MK4) Maks. teža obdelovanca med konicami: približno 250 kg Pomik osi X: približno 380 mm Pomik osi Z: približno 1.150 mm Premer brusilnega krožnika: 400 – 500 mm, odvisno od opreme Bjdozp Idtjpfx Altodf Nazivna moč: 9 – 11 kW (približno 12 – 15 KM) Obodna hitrost: 20 – 50 m/s Lastnosti in zmogljivosti CNC-nadzor preko na dotik občutljivega zaslona z operacijskim sistemom Windows – udobno programiranje preko dialoga ali DIN/ISO (opcija) Koncept "dva v enem": stroj lahko upravljamo na konvencionalen način ali s CNC-krmiljenjem Visoko natančni linearni in kroglični vodila za visoko natančnost Direkten merilni sistem (stekleni merilniki) (opcija pri številnih strojih) Avtomatsko obnavljanje brusilnega krožnika s kompenzacijo Nadzor trkov in nadzor vrzeli za varnost stroja in procesa Hladilni sistem, separator emulzije in transporteri žetonov so na voljo (odvisno od opreme) Priprava za avtomatizacijo / vmesnik za robota je možna Stroj si lahko ogledate po dogovoru. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah, ter do vmesne prodaje!

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Okuma Multus B300-W 6-osni stružno-rezalni stroj - Okuma OSP P200L Bedpfx Alsyg Rf Nstjdf - Leto izdelave: 2008 - Čas rezanja: 10.500 h - Rezkalno vreteno H1: 6000 obr/min - Glavno vreteno: 3800 obr/min, Rota NC 315-86 - Protipokončno vreteno: 5000 obr/min - ATC 60 Sistem HSKA-63 (60 orodij) - Zelo dobra geometrija - Marposs senzor orodja

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered is a CNC-controlled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external, internal, face, and cylindrical grinding operations. The W 11 CNC cylindrical grinding machine is ideal for single-part, prototype, and series production. It is also used in training and maintenance departments. Bdjdpfer Ey Hujx Altef CONTROL SYSTEM Eckelmann TECHNICAL DATA Workpiece length: max. 1,500 mm Centre height: 200 mm | Option: 320 mm Workpiece weight: 250 kg Workhead: Morse taper 4 | Option: Morse taper 5 / Morse taper 6 Tailstock: Morse taper 4 TOOL CARRIER Single wheel machine, angular/straight, but also possible with 2 wheels with B-axis and internal grinding spindle. Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Description: General: Year of manufacture: 2020 Control system: WEISS CNC Distance between centers: 6 mm Center height: 200 mm Grinding wheel dimensions: 400 x 60 mm + 0 x 60 mm Workpiece spindle head: Rotational speed: 1 rpm Max. workpiece weight: 25 kg Max. grinding diameter: 390 mm Mount: MK4 Grinding spindle head: Peripheral speed: 2 m/s Grinding wheel dimension right: 0 x 60 mm Grinding wheel dimension left: 400 x 60 mm X-axis: 380 mm Z-axis: 1.1 mm B-axis: Torque motor, stepless Tailstock: Quill diameter: mm Quill stroke: 45 mm Mount: MK 4 Micrometer adjustment: +/- 0.04 mm Equipment / Accessories: Position measuring systems: Direct (glass scales) Grinding spindles: 2x grinding spindle (left/right) Bsdpfx Alev Armcotedf GAP / Crash Control: Structure-borne noise (Sensotronic) Balancing: MPM balancing device Workpiece measurement: Marposs PF ME Automation: Robot interface prepared Setup mode: Electronic handwheel Emulsion mist separator: Mechanical Dresser: For external grinding wheel left/right Accessories: Various grinding wheels + flanges

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, distance between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland (CH) Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net machine weight: 5,500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Distance between centres: 650 mm LONGITUDINAL SLIDE (Z AXIS) Max travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X AXIS) Max travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Max. workpiece weight between centres: 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL WHEELHEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Wheelhead drive power: 12.5 kW Rotational speed: 3,200 min⁻¹ Programmable cutting speed up to: 50 m/s B axis travel: -15° to +195° B axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° Hydraulic advance with pressure control All technical details are given without guarantee, subject to errors and omissions. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (inspected and/or replaced) Wheelhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjustment. Newly painted. Workhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock Disassembled, overhauled and inspected. Hydraulics Disassembled, motor inspected, hoses, defective and worn parts replaced. Hydraulic block checked. X-axis Disassembled, worn parts such as O-rings, seals, segments etc. replaced, hydraulic piston overhauled, tables ground. Z-axis Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully inspected, various relays replaced. Paint Colours: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Bdedpfx Aszbaz Ajltof Inspection and cleaning of various accessories.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 20.995 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W11106617/144, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, premer brušenja: 390 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding diameter: 0–390 mm Internal and external grinding: up to 1 m Max. workpiece weight (overhung, Morse taper 4): 100 Nm Max. workpiece weight (between centers): 250 kg X-axis Traverse Rapid traverse: 350 mm Rapid feed rate: 12 m/min Fine-feed increment: 0.0001 mm Z-axis Traverse Max. travel path: 1,150 mm Travel speed: 12 m/min Measuring system resolution: 0.0001 mm Spindle Data Internal grinding spindles: 80 x 350 mm Grinding Spindle Headstock Grinding wheel diameter: 400 mm Drive power: 5.5 – 7.5 kW Peripheral speed: 25 – 50 m/s Workpiece Headstock Speed range: 1 – 1,000 rpm Internal chuck mount: MK4 Centering diameter: 63 / 80 mm Tailstock Quill taper: MK4 Quill stroke: 45 mm Filtration and Extraction Paper band filter system: 350 l container Mechanical mist extraction: 600 m³/h MACHINE DETAILS Operating hours: 20,995 h EQUIPMENT Full enclosure Manual balancing system Bdodpfx Aow Nwxuoltof Touch-trigger longitudinal positioner Leveling shoes for alignment Grinding centers MK 4 solid carbide, full and half points Diamond dressing tool 0.5 carat

Leto izdelave: 2007, stanje: rabljeno, Premer zobateženja - zunanje zobateženje 1200 mm Premer zobateženja - notranje zobateženje 1200 mm Širina zobateženja - maks. 260 mm Krmiljenje Liebherr PC-NC Premer obdelovanca - maks. 1500 mm Premer mize 900 mm Premer izvrtine mize 320 mm Maks. obremenitev mize 95 kN Moč pogona 30 kW Črpalka hladilne tekočine 120 l/min Razdalja osi batne vretena - delovna miza 0-820 mm Premer batne vretena 125 mm Vpenjalo orodja SK 45 DIN Teža stroja pribl. 26 t Potrebni prostor pribl. 8,073 x 6,183 x 4,375 m Hodi: - Dolžina hoda min./maks. - 0 mm / 270 mm - Nastavljivost dolžine hoda - 270 mm - Število hodov (dvojni hodi) - 10 do 270 DH/min Oprema/dodatki: - Transporter za ostružke - Nosilec rezalnega zobnika SK 45 DIN - Hladilnik - Tehnična dokumentacija Bedew Rf S Eepfx Altsdf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, OEM – Marking Laser / Engraving Laser (with CO2 Laser Source) The source of the complete system is a 30-watt CO2 laser with a wavelength of 10,060 nm. The standard marking area is approximately 140 x 140 mm; optionally, up to 300 x 300 mm is possible. No external cooling is required. Power supply: 110...240 VAC / 50 Hz. Applications include laser engraving and material removal. The control software EzCad is installed on the included laptop, with selectable languages (German, English). Optionally, the laser marker can be equipped with a manually adjustable Z-axis. The laser is prepared for integration into a higher-level system but can also be operated as a stand-alone unit. For integration, interfaces are available for interlock, emergency stop, external laser control, etc. We are happy to support our customers in accordance with their requirements. Bjdpopyg N Ajfx Altedf

Stanje: dober (rabljeno), Leto izdelave: 2009, Premer kolesa - maks. 1200 mm Širina kolesa 260 mm Modul - maks. 16 Modul - min. 0,5 Hod 270 mm Razdalja vreteno/miza 920 mm Držalo rezalnega kolesa SK Krmiljenje Bosch MTX Premer mize 900 mm Maksimalni premer obdelovanca pri notranjem zobčenju 1200 mm Število hodov - brezstopenjsko 50-1000 hodov/min Premer vretena 125 mm Vrtina mize 320 mm Razdalja osi min/maks 0-820 Bedpfxjwzmpzo Altjdf Pogonska moč rezalne glave 30 kW Skupna priključna moč 72 kVA Teža stroja cca 24 t Potrebni prostor cca 6,5x2,9x4 m M8160132

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Bdjdjtqf Rzspfx Altjf Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat