Zobniški motor 0,25 kW 670 vrt/min

ELKA M80B8

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Fsdpfsxmaguex Abtjgc Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of turret heads: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 mm - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 mm - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW SUB SPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 mm - Max. machining diameter: 190 mm - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° - Travel: 760 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 42 kVA WEIGHT AND DIMENSIONS - Footprint: 4,414 x 2,370 mm - Machine height: 2,115 mm - Machine weight: 6,200 kg OPERATING HOURS - Power-on hours: 15,525 h - Operating hours: 12,865 h EQUIPMENT - Control: Mitsubishi MSX-850II Fedpfsx Tvkrsx Abtogc - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measurement system: Renishaw - 3-color status light - Tailstock function - Coolant tank - Chip conveyor: right side - Spindle cooling - Parts catcher - Bar feeder: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - 3-jaw chuck

Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 250 mm, stružna dolžina: 730 mm, premer struženja: 500 mm, največja hitrost vretena: 1.800 obr/min, CNC stružnica CK 6150 s plosko posteljo Ponujamo novo CNC stružnico, model CK6150. Ta stroj uporabljamo tudi v lastni proizvodnji, zato si ga lahko pred naročilom ogledate v delovanju. Stružnica CK 6150 ima plosko posteljo in kaljene vodila, kar zagotavlja dolgo življenjsko dobo stroja. Stroj je standardno opremljen s CNC krmilnim sistemom GSK. Po želji lahko namestimo tudi Fanuc ali Siemens CNC sistem. Glede na zahteve kupca je možno montirati revolversko glavo za 4, 6 ali 8 orodij. Stroj je možno opremiti s hidravličnim vpenjalom, kar bistveno poenostavi nameščanje obdelovancev, ter z hidravličnim konjičkom. CK 6150 je lahko dodatno opremljen z nosilnim ogrodjem za natančnejšo obdelavo dolgih kosov. Tehnične specifikacije: Model: CK 6150 x 1000 Največji premer obdelovanca nad posteljo: 500 mm Največji premer obdelovanca nad suportom: 250 mm Največja dolžina obdelovanca: 1000 mm Največja dolžina struženja: 730 mm Premer vretena: 82 mm Fodpfxexdmgvo Abtogc Hitrost vretena: 150–1800 min⁻¹ Moč glavnega motorja: 7,5 kW Mehanska glava (hidravlična opcijsko) Premer vpenjala: 250 mm 4-pozicijska orodna glava (6 ali 8 pozicij opcijsko) Največja velikost orodja: 25x25 mm Teža stroja: 2700 kg Dimenzije stroja: 2650 × 1700 × 1820 mm Dobavimo lahko tudi druge modele stružnic serije CK: CK 6140 – delovna dolžina: 550/750 mm CK 6150 – delovna dolžina: 1000/1500/2000 mm CK 6160 – delovna dolžina: 1000/1500/2000 mm CK 6152E – delovna dolžina: 1000/1500/2000/3000 mm CK 6165E – delovna dolžina: 1000/1500/2000/3000 mm CK 6185E – delovna dolžina: 1000/1500/2000/3000/4000 mm CK 61100E – delovna dolžina: 1000/1500/2000/3000 mm CK 61125E – delovna dolžina: 1000/1500/2000/3000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Mori Seiki NL2500Y/700 CNC stružnica Leto izdelave: 2007 Krmilnik: MORI MSX-850 III Glavno vreteno: Vretenovski nos: A2-8 Pogon glavnega vretena: 18,5 kW Največja hitrost glavnega vretena: 4000 min⁻¹ Največji premer izvrtine vretena: 80 mm Maks. premer obdelave: 366 mm C-os: 0,001° REVOLVERSKA GLAVA: Število pozicij: 12 Število pozicij za gnana orodja: 12 Minimalni zasuk revolverske glave: 0,001° Hoda osi X/Z: 280 / 785 mm Hod osi Y: ±50 mm Največja hitrost gnanih orodij: 6000 min⁻¹ Moč gnanih orodij: 5,5 kW Fodpeyxpprsfx Abtsgc KONICA: Stožec: MT5 Razdalja med konicama: 705 mm ELEKTRIČNI PRIKLOP: Skupna priključna moč: 39 kVA TEŽA IN DIMENZIJE: Zahtevani prostor: 3800 x 2143 mm Višina stroja: 2232 mm Teža stroja: 6100 kg Pribor/možnosti: - 2 omari za pribor - 5 gnanih nosilcev orodij, več stoječih nosilcev - napenjalne puše, vstavki, orodja, tulec itd. - visokotlačni papirni tračni filter, mikro filtracija, rezervoar za hladilno sredstvo - transportni trak za odrezke - vpenjalni tulec različnih dimenzij - Kitagawa hidravlična 3-čeljustna glava, premer 210 mm - Komplet dokumentacije - Lovilec obdelovancev Pod napetostjo v našem skladišču. Video na zahtevo!

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Fjdpfx Ajgwbbqsbtsgc Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: dober (rabljeno), Leto izdelave: 2010, Stroj ima možnost pogonskih orodij in Y-os. Rezalna orodja niso priložena. Deli, prikazani z roko, niso vključeni. Tehnične podrobnosti so prikazane na slikah. Fodpfxexpw Nlj Abtogc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Fgedpfx Abotwy Dijtec Electrical connection: 380 V, approx. 15 kVA Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, 4-osni obdelovalni center Dimenzije mize: 1200 x 660 mm Pomiki osi: X 1050 mm, Y 650 mm, Z 660 mm Največja obremenitev mize: 1600 kg Hitrosti podajanja: 15.000 mm/min Orodniška menjava s 31 mesti, delno opremljena s BT 50 nosilci orodij Fedpfx Ajfbml Nebtogc 4. os (krmiljena): NIKKEN CNC 250, premer vpenjalne glave 250 mm Dimenzije (DxŠxV): približno 3000 x 5000 x 2900 mm Teža: približno 13.000 kg

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Fgodpfxed Nt Rqs Abtsc Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Fedpfx Ajdh Tfgjbtogc Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space