Varilna palica 1,2 mm neto Teža 15 kg

ELGACORE MXA 100XP (1,2)

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of Kledpfx Aast Hw Shomsw belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, 7 pieces of folding tools for a swivel bending machine, length 3000 mm. Kedpfx Aasb D Ry Rsmjlw

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Kledpfxjfxpbmj Aamow

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, skupna masa: 1.000 kg, skupna višina: 3.500 mm, nosilnost: 2.500 kg, globina grla: 5.000 mm, delovna višina: 3.000 mm, Certificirano po DGUV do: 06/2025, Oprema: dokumentacija / priročnik, Pillar Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Units Available For sale are several pillar and wall-mounted jib crane systems from manufacturers Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approx. 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing facilities, assembly stations as well as in internal logistics. Some of the systems are classic pillar jib cranes with single cantilever arms, while some are double-arm pillar jib cranes, allowing them to serve two separate working areas. The cranes are equipped with electric chain hoists and trolleys, and are operated via pendant controllers. The units can be purchased individually. Inspection possible by appointment. Taucha Pillar Jib Crane – Capacity 2,500 kg Heavy-duty pillar jib crane with floor-mounted steel column and cantilever arm for industrial lifting and assembly work. Taucha Pillar Jib Crane – Capacity 2,000 kg Pillar jib crane with swiveling cantilever arm for material handling in production and assembly areas. Taucha Pillar Jib Crane – Capacity 1,600 kg Industrial crane with column installation and swiveling boom, suitable for medium to heavy loads. Taucha Pillar Jib Crane – Capacity 1,250 kg Pillar jib crane with cantilever arm and trolley for precise material movement. Taucha Pillar Jib Crane – Capacity 1,000 kg Pillar jib crane with electric chain hoist and pivoting boom for assembly workstations. Taucha / Liftket Pillar Jib Crane – Capacity 1,000 kg Pillar jib crane with Liftket electric chain hoist, suitable for industrial lifting applications. Taucha Pillar Jib Crane – Capacity 800 kg Pillar jib crane with swiveling boom and trolley for workshop and production areas. Taucha Pillar Jib Crane – Capacity 800 kg (Double Cantilever) Pillar jib crane with two opposing cantilever arms, suitable for servicing two workstations. Taucha / Liftket Pillar Jib Crane – Capacity 500 kg Ksdpfoyt Hc Djx Aamslw Pillar jib crane with electric chain hoist for lighter lifting tasks. Liftket Pillar Jib Crane – Capacity 500 kg Pillar jib crane with Liftket chain hoist and swivel arm. Demag Wall-Mounted Jib Crane – Capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, ideal for workplaces with limited space. Taucha Pillar Jib Crane – Capacity 250 kg Compact pillar jib crane for light loads. Taucha Pillar Jib Crane CS KD 250-6 – Capacity 250 kg Pillar jib crane with swiveling cantilever and electric chain hoist. Liftket Pillar Jib Crane – Capacity 250 kg Pillar jib crane with Liftket electric chain hoist for assembly work. Taucha Pillar Jib Crane – Capacity 200 kg Pillar jib crane for light material movement. Taucha Pillar Jib Crane – Capacity 125 kg Lightweight pillar jib crane for small components and tools. Taucha Pillar Jib Crane – Capacity 100 kg Compact workshop crane for light loads. Taucha Pillar Jib Crane – Capacity 50 kg Very lightweight jib crane for small lifting operations.

Leto izdelave: 2007, stanje: dober (rabljeno), Danobat CNC Vrtalno / Rezilno linijo – Letnik 2007 Enojno rotirajoče vreteno. 18 metrov vhodnih transportnih valjev. 12 metrov izhodnih transportnih valjev. Prijemalna enota za podajanje. Prečna transferja za vhod. Prečna transferja za izhod. Kapaciteta 750 mm. Kapaciteta rezanja: Kapaciteta krožnega rezanja (brez navpičnih čeljusti, kot 0 stopinj): 520 mm. Kapaciteta pravokotnega rezanja (brez navpične čeljusti, kot 0 stopinj): 700 mm x 500 mm. Ksdpsig T Amofx Aamjlw Največja kapaciteta z navpičnimi čeljustmi: 700 x 500 mm. Kapaciteta krožnega rezanja pri 45-stopinjskem zasuku: 450 mm. Kapaciteta pravokotnega rezanja pri 45-stopinjskem zasuku: 450 x 500 mm.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A complete CNC double-gantry plasma cutting system from Microstep with oxy-fuel torch for nesting, bevel cutting, and pipe processing is available. 1) Plasma cutting machine, max. processing length: 16,500 mm, max. processing width: 2,500 mm, max. processing width including channel: 3,700 mm, max. material thickness stainless steel/mild steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: equipped with a plasma rotator and a Kjellberg HiFocus 280i neo plasma power source. Gantry 2: fully automatic acetylene oxy-fuel torch with the option to install a second torch carriage. Pipe cutting device: pipe diameter range: 30 mm–700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 filtration system, air volume: 16,000 m³/h, filter elements: 16. Documentation available. On-site inspection possible. Expected to be available from late 2025/early 2026. Images are from commissioning in 2014. Kodswmqwyepfx Aamslw

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 84659300, Stroj je sestavljen iz 3 delovnih enot: Ksdpfx Aexn Ifuoamolw 1. XSV ščetke (12 rotirajočih in nihajnih ščetk) 2. XSV ščetke (12 rotirajočih in nihajnih ščetk) 3. Valjasta ščetka Dovajalni trak 1350 mm.

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 12.000 mm, potovalna razdalja osi X: 12.000 mm, Oprema: hladilna enota, varnostna svetlobna zapora, Težka vlaknovna laserska rezalna stroj za cevi s tremi vpenjali NS-12052HG 12000 mm, vpenjalo 500 Servopogon za pomožno podajanje Visokokakovostno vpenjalo Prilagodljivo različnim dimenzijam cevi Servokrmiljenje, vrhunske zmogljivosti Klodpev D Uhfofx Aamjw Zagotavlja napravi izjemno dinamično delovanje Pomožni podajalni sistem Zmanjša delovno obremenitev in poveča učinkovitost Več vrst obdelanih cevi Podprto je "leteče rezanje" Visokonatančen nadzor osi Z Rezanje pod kotom Visoka stopnja avtomatizacije Obdelovanci dolžine ≤2 m se izločajo prek servo loput

Leto izdelave: 2000, stanje: dober (rabljeno), največja dovoljena obremenitev: 5.400 kg, Premer palice (maks.): 40 mm, debelina stene: 50 mm, številka stroja/vozila: 26130, Os CNC, ki nadzoruje gibanje: Os 'X': obseg gibanja 0–18.000 mm; Os 'Y' (vrtalna glava, horizontalna, desna stran): 10–450 mm; Os 'Z' (vrtalna glava, horizontalna, leva stran): 10–450 mm; Os 'V' (vrtalna glava, vertikalna): obseg gibanja 20–895 mm; Os 'R' (rezanje žage pod kotom): obseg gibanja +45 stopinj do –60 stopinj; Os 'S' (gib žage): 0–450 mm; Največja hitrost premika: Os 'X': 50 metrov/minuto; Os 'Z': 10 metrov/minuto; Os 'V': 10 metrov/minuto; Hidravlična agregatna postaja, primerna za oba stroja; Električna omarica za upravljalne naprave, osrednji prenosi za pogonske enote in elektronska oprema; Kodpfxsqcu Euo Aamelw Redno vzdrževanje vrtalne in žagalne linije; Na voljo so sheme električnih vezij, nadzornih sistemov in navodila za uporabo; Na zahtevo so na voljo poročila o servisu in popravilih. Teža vrtalnega stroja približno 6.000 kg; Teža žagarske enote približno 3.700 kg; Dimenzije tračne žage: 7.400 mm x 41 mm (širina); Teža električne omarice približno 700 kg; Teža stiskalne glave z vodilom približno 800 kg; Stranka lahko pomaga pri razstavljanju in odstranjevanju opreme. Površina, ki jo zaseda celotna linija, znaša približno 40 metrov, vključno s transportnim trakom.

Stanje: rabljeno, Leto izdelave: 2006, Višina rebra min. 80 mm, maks. 1220 mm. Višina pasnic min. 42 mm, maks. 600 mm. U profili min. 80 mm, maks. 1200 mm. Višina pasnic min. 45 mm, maks. 300 mm. Kotniki min. 80x80x8 mm, maks. 300x300x50 mm. Ravnine min. 100 mm, maks. 1220 mm. Kvadratne cevi min. 80x80 mm, maks. 600x600 mm. Pravokotne cevi min. 80x40 mm, maks. 1200x600 mm. Pozicijska masa maks. 15.000 kg. Linearni masni razdelek (teža na tekoči meter) maks. 750 kg/m. Hitrost pomika vozička maks. 30 m/min. Število vrtalnih glav: 3 - dve vodoravni vrtalni glavi z eno vreteno - ena navpična vrtalna glava z eno vreteno Maksimalni premer vrtanja: 50 mm (s stožčastim adapterjem št. 4) Maksimalna debelina, ki jo je mogoče vrtati: 75 mm. Kledpfx Aajx N Iclemow Motor vretena na glavo (AC): 15 kW Število obratov vretena (s programskim nastavljanjem): 180–3000 RPM Pozicijski hod glede na referenčno linijo: - navpična vrtalna enota: 20–1200 mm - vodoravni vrtalni enoti: 10–600 mm MENJAVA ORODJA: - število naprav za zamenjavo orodij: 3 - število orodij za zamenjavo: 6 - dimenzija adapterja: ISO 45 Model 1260 BH za profile – hladno žaganje: - kapaciteta žaganja pri 90°: min. 80 x 10 mm - kapaciteta žaganja pri 90°: maks. 1250 x 600 mm - kapaciteta žaganja pri 45°: 800 x 600 mm - kapaciteta žaganja pri 60°: 500 x 500 mm - motor tračne žage: 11 kW - hitrost žage: 20–100 m/min - dimenzija žaginega traku: 67 x 1,6 mm