Ploski brusilniki z vodoravnim vretenom

Elb Optimal 6375 ND X: 600 Y: 375 Z: 375 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis Rsdpfevdal Aox Ad Tjbt 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Rbjdew Dvkajpfx Ad Tst Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Rodpfx Aovrcqded Tjbt For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Rbjdpfx Adecxxtmo Tot Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Rjdpfewudhuox Ad Tobt Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Pitch: 8 mm Roll spindle mount diameter: 69.85 mm Redpfjvpaa Rox Ad Tsbt Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight: approx. 3.1 t Space requirement: approx. 1.9 x 1.1 x 1.2 m

Stanje: rabljeno, Leto izdelave: 1977, Surface grinding machine, manufacturer Okamoto, model PSG-63 UA, year 1977. Magnetic chuck: 600 mm x 300 mm. Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation. Rbodsiz Tmkepfx Ad Tst

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Grinding Wheel Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings plus adjustment. New paintwork. Workpiece Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal Grinding Attachment Disassembly, cleaning of components, replacement of worn and defective parts, assembly of support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, replacement of hoses, worn and defective parts. Check hydraulic manifold. X Axis Disassembly, replacement of worn components such as O-rings, seals, segments, etc., overhaul of hydraulic cylinder, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor contactors and relay controls. New wiring. New variable frequency drive for workpiece headstock. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance, headstock to overhanging tailstock 1650 mm Centre height, standard 125 mm Centre height with riser block 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with risers 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement, 1 handwheel revolution – coarse 20.006 mm Manual table movement, 1 handwheel revolution – fine 2.457 mm Table speed, stepless, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Workhead Spindle Workpiece speed, stepless electric 20–400 rpm Swivel 360° Internal taper of workhead spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Quill retraction, manual or hydraulic 30 mm Internal taper for diamond dresser MT0 Universal Grinding Head Transversal slide stroke (grinding wheel) 285 mm Rapid traverse of grinding wheel slide, forward and back 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical movement of grinding spindle, centre height 125–330 mm Grinding wheel for cylindrical grinding, max 400x50x127 mm Grinding wheel for surface grinding, max 250x20x76 mm Rbjdpjxt Ilfjfx Ad Tjt Swivel angle of grinding head, lockable every 90° 270° Wheel feed 1 division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Workhead spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Internal Grinding Attachment Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless stated otherwise, technical data is provided without guarantee and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, Offered for sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: Redjv Epigepfx Ad Tobt 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Control system: ELB PLC Grinding area: Length X 1000 mm Width Z 750 mm Height Y 400 mm Magnetic chuck 1000 x 700 mm Table load capacity (without magnetic plate): 1100 kg Longitudinal axis X: Table speed 2–26 m/min Maximum longitudinal stroke 1100 mm Vertical axis Y: Vertical stroke 400 mm Maximum feed speed 1200 mm/min Minimum vertical infeed 0.001 mm Cross axis Z: Maximum cross stroke 620 mm Maximum feed speed 2000 mm/min Minimum cross infeed 0.001 mm Rsdpfovwl Ipsx Ad Tebt Grinding spindle: Taper 75 mm Drive 22 kW Speed range 1450 rpm Grinding wheel dimensions: 450 x 150 x 203.2 mm Machine footprint (without control panel) LxWxH: 3550 x 2750 x 3230 mm Total machine weight: 7300 kg