Stroj za zarezovanje

Edel 910E

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication Gijdjb U Hwpspfx Ad Asp - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Sheet thickness: 1.6 mm Gsdpfx Aeftd Uajd Ajip Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Table area: 450 mm x 305 mm Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Gjdpfx Adjb U Hwme Ajip Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Sheet width: 3230 mm Sheet thickness: 2.5 mm Sheet thickness (stainless steel): 1.5 mm Strokes: 28 - 42 strokes/min Cutting angle: 1.60 degrees Table height: 820 mm Distance between uprights: 3540 mm Control: ELGO 87P Motor power: 6.8 kW Gisdpfxoxacd Nj Ad Ajp Machine weight: approx. 3410 kg Dimensions (LxWxH): 4070 x 2070 x 1400 mm From a maintenance workshop Including special accessories (!!) Features: - Heavy-duty, motorized swing-beam guillotine shear - Break-proof, torsion-resistant steel weldment construction - Compact and clearly laid out machine design - NC electro-motorized back gauge - Including NC ELGO "Type 87P" digital control unit * Adjustable from the front right * Actual/target value position input * Stepless adjustment through entire travel range * Coarse adjustment via push buttons * Limit protection by end stops - "Duo-Cut" drive with two dynamic, high-performance gear motors - Support table with handgrips - Hold-down beam with hard rubber strip - Fully steel, double-edged blade - Selector switch for single and continuous stroke - 1x free-moving foot switch - Rear safety device - Original operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cutting - 1x extra-long side stop, including support foot and digital stop - 2x extra-long, front support arms * With "SLIDING" mounting – for easy shifting

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Godpfxob U Hwnj Ad Ajip Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Comparable to Durma, Baykal, Ermaksan, etc. Gisdeq Rdtqepfx Ad Aop Bending length: 3020 mm Press force: 135 t Approach speed: 140 mm/s Maximum bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between uprights: 2555 mm Machine length: 3730 mm Machine width: 2300 mm Overall height: 2850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9500 kg (Technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double-guided upper beam, stable and precise - Sturdy, double-guided back gauge - Manually adjustable back gauge fingers, double-guided on linear rails - Moveable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Recommended options: - Dener DA 66T control system - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending precision - 2 additional back gauge fingers Further bending lengths and capacities available with appropriate accessories!

Stanje: rabljeno, Leto izdelave: 1993, Tehnični podatki: Širina pločevine: 3050 mm Giodpfx Adeu Rni Ho Asp Debelina pločevine: 6,0 mm Razmak stojal: 3460 mm Število gibov min./maks.: 9 / 17 gibov/min Zadnja opora: 750 mm (motorizirana) Kot reza: 0,5° - 3,0° Nastavitev reže: ročna Pritiskači: 18 kosov (hidravlični) Velikost mize: 380 x 3100 mm Skupna priključna moč: 7,5 kW Teža stroja pribl.: 4,56 t Dimenzije stroja: D: 3,64 x Š: 2,55 x V: 1,58 m Oprema: -z bočno prislono D: 1000 x Š: 100 x V: 60 mm in prislono letev 990 mm, z 8 nosilci -upravljanje preko nadzorne plošče in nožnega stikala -osvetlitev območja reza -število gibov -nogice za stroj

Stanje: novo, Leto izdelave: 2025, Mechanical Guillotine Shear for Sheet Metal Gedpfx Adefwmyde Aoip METFORMER HCO-2x2000mm The shear is made entirely of steel, with a solid and heavy-duty construction. It features a simple design with a good appearance and is easy to operate. This shear is widely used for cutting thin and medium-thickness steel sheets in light machinery manufacturing and equipment production. The blade is made from a super-strength steel alloy. Technical specifications: Model: HCO-2x2000 Motor power: 3.0 kW Maximum sheet thickness: 2 mm Number of cutting edges per blade: 4 Length: 2800 mm Width: 1260 mm Height: 1300 mm Weight: 1350 kg

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 3253-80, Offer 22045 Technical Specifications (approx.): - Pressing force: 10 t - Throat depth: 150 mm Gjdpektg Dhjfx Ad Aeip - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Through-hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram area: 240 x 150 mm - Ram bore diameter: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Stroke rate: 130 strokes/min - Hydraulically operated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Space requirement approx.: W 1000 x H 1800 x D 1100 mm - Weight approx.: 1300 kg

Stanje: novo, Leto izdelave: 2024, delovna širina: 3.050 mm, stiskalna sila: 175 t, For sale is a high-performance DURMA press brake, model AD-S 30175, equipped with an extensive range of standard features and selected options, making it ideally suited for demanding metalworking applications. Standard equipment: - Capacity and size: 3050mm x 175 tons - Installation height: 530mm - Throat depth: 450mm Gsdpfsrx Rkujx Ad Aoip - Stroke: 265mm - Axis control: Precise 4-axis control. - Safety systems: Manual F. AKAS FPSC safety system, CE F.AKAS BVLT light guards, and safety enclosures ensure maximum operator protection. - Backgauge: Servo-driven backgauge with linear guides and recirculating ball screw for maximum precision. - Tool clamping system: European standard for quick and secure tool changes. - Front support arms: Adjustable, supporting the handling of various workpiece sizes. Selected options: - Control upgrade: SKY 22 – 3D, enabling even more detailed bending operations and 3D visualization. - Crowning: Motorized adjustment for even more precise bending results. - Backgauge: Extended with motorized X and R-axis backgauge (X=650mm), for increased flexibility and accuracy. - Quick clamping: Manual quick-release clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency, and safety. For further information or if you are interested, please contact us. Don’t miss the opportunity to expand your manufacturing capabilities with this high-quality machine.