Tandem stiskalnica 10 metrov 1250 ton

DURMA Tandem AD-S 101250

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, potovalna razdalja osi X: 6.500 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 1.300 mm, dolžina podajanja os X: 10.000 mm, dolžina pomika po osi Y: 10.000 mm, dolžina podajanja os Z: 10.000 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, največja hitrost vretena: 7.000 obr/min, hitrost vretena (min.): 20 obr/min, dolžina mize: 8.000 mm, širina mize: 1.100 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2016 Capabilities / Travel Range: Longitudinal (X): mm 6,500 Vertical (Y): mm 1,800 Cross (Z): mm 1,300 Table Size: Duodsxvx Amepfx Agpsp Length: mm 8,000 Width: mm 1,100 Number of T-slots on the Table Surface: units: 7 Width of T-slots: mm 22 Distance between slots: mm 140 Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool Holder: ISO 50, DIN 69871 AD Pull Stud: DIN 69872 Type A Main Drive: Drive Power: 100% DC KW43 Spindle Speed Range: Spindle Speed max.: min-1 20 - 7,000 Torque: Nm 900 Feed Rates: X, Y, and Z Axis mm/min 2 – 10,000 Max. Rapid Traverse Rate: X, Y, and Z Axis mm/min 35,000 Footprint SLP8000: (without enclosure) m 13.0 x 4.5 Overall Height: m approx. 4.4 Weight: kg approx. 34,000 Heidenhain TNC 640 HSCI Automatic Milling Head, Diagonal H207 Adapter Angular Milling Head SK50 with Hirth Coupling Automatic Tool Changer, 60 magazine positions Chip Conveyor Preparation / Integration for NC Rotary Table Adaptive Control ACCURA HEADS Coolant System 2 RepairFIT is our proven solution for an efficient entry into our product lines. The machines available in this product line are sourced by us through a rigorous selection process and subjected to comprehensive inspection (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, skupna masa: 2.500 kg, največja dovoljena obremenitev: 2.500 kg, tip droga: teleskopski, Self-propelled battery-powered crane by renowned Italian manufacturer JMG, model MC25S with radio remote control and a lifting capacity of 2,500 kg. Brand new machine, available for inspection. Distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. DRIVE SYSTEM: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM ANGLE UP: 60° BOOM ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant structure made from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of a base unit, hydraulic telescopic system and one mechanical extension. Boom elevation and extension are hydraulically operated using telescopic cylinders. TRAVEL MOTOR: 2 electric motors, 2 kW, 24V AC, insulation class H. PUMP MOTOR: Electric motor 3 kW, 24V DC, insulation class H. DRIVE: Electronic speed control, MOSFET type. BATTERY: 24 V 420 Ah, with charge indicator. DRIVE TRANSMISSION: Front axle driven by two gearboxes. WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2 -8", 2 pcs. BRAKES: Automatic on front wheels. STEERING: Rear axle steering via electric motor. Max. steering angle ± 90°. CONTROL: Operated via radio remote control. HYDRAULIC SYSTEM: Powered by a low-noise 3 kW gear pump. Cylinders operated by an electro-proportional distributor controllable via radio remote. Equipped with a filter and safety valve. Max. working pressure 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter. STANDARD EQUIPMENT: • Max. lifting capacity 2.5 t • Front wheel drive via two gearboxes (one per wheel) • Hydraulically telescoping boom (1 fixed section, 2 telescopic sections) • Manual mechanical boom extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and travel • Electronic load indicator and limiter compliant with CE standards • Boom inclination +60° / -15° • CE conformity declaration • Operation manual, technical documentation, declarations Dujdpfxswtppzo Agpjp INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tires • Battery water refilling system • On-board mobile charger • Manual three-position jib (1.0 t)

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. Dujdpfx Agsnah Taepop By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == Dedpfx Aed Hy Eljgpoup ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: dober (rabljeno), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Swiveling control panel with digital display Dujdpfx Agewkaalspep Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Dsdpfx Asvc Hk Nsgpjup Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Colour: beige/green

Leto izdelave: 2001, stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm Dodpfx Aot Ea Tfogpsup - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining

Stanje: rabljeno, Leto izdelave: 1995, Lepilna linija Wohlenberg Master 6501 Leto izdelave: 1995 Sestavljena iz Dusdpett Ug Iefx Agpjp Zlagalna naprava Wohlenberg Sprinter 7010 Opis: - Ročna vstavna postaja - Število zlagalnih postaj: 16 - Optično prepoznavanje pole: WST (skupaj 4 od 24) - Brez črpalk - Stroj je bil priključen na centralni zračni sistem - Namestitveni element - Predaja lepilniku Lepilni stroj Wohlenberg Master 6501 Opis: - Število sponk: 18 - Postaja za rezkanje in grobljenje - Odsesavanje prahu - Hotmelt hrbtno lepljenje z integriranim predgretjem - Hotmelt stransko lepljenje z integriranim predgretjem - Gaze postaja - Rotacijski ovijalni podajalnik - 1. pritiskalna postaja - 2. pritiskalna postaja - Odlagalna naprava Transportna proga - Navpični transportni sistem, dolžina (pribl.): 30 m - Nujna izložba Opis spremenjen dne 14-04-25

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Duedpfohzbipox Agpep Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Brewing plant with a cast wort volume of 20 hl, consisting of the following components: 1. Milling unit (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, grist conveyor, and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels featuring copper tops, lauter tun with spindle station, and control cabinet 3. Fermentation and storage cellar with 4 × open fermenters (Joh. Albrecht, 1999, 25 hl), 1 × fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 × storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar), and 6 × storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks equipped with double-jacket cooling. 4. Pressurized tank cellar with 2 × pressure tanks (Speidel, 2021, 86 hl, 3 bar), 1 × pressure tank (INOX, 2018, 67 hl, 3 bar), and 4 × pressure tanks (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks have double-jacket cooling. 5. Keg washing and filling machine (BTB Multimat MT/2, 1997, 17–20 kegs/h) 6. Cooling unit as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. Steam generator with water softening unit (Jumag, 2000, 224 kg/h steam, oil-fired) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with control cabinet Dodpfjwgc Udsx Agpsup Do you only require part of the equipment? Sale is handled via brokerage. Partial sales may be possible – simply enquire and submit an offer. Additional info: Cast wort volume 20 hl, years of manufacture 1997–2021 Wort cast volume: 20 hl Equipment: Milling unit; 3-vessel compact brewhouse; fermenters; fermentation, storage, and pressure tanks; keg system; cooling unit; steam generator, hot water tank, CO₂ liquid gas tank