Varjenje rotacijska miza

DUMETA D-TLP-030

Stanje: novo, Leto izdelave: 2025, Genie GS2646 NEXT GENERATION E-Drive scissor lift, new, used, demonstration machines available Ijdpfx Agernnc Rspja

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Iodpfoia Rtdox Agpja Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Iedpfxefrzvls Agpsa Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer featuring: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Iedpfx Aged Ixadopja Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), 1x Drive unit with chassis 1x Idler unit with chassis and height adjustment - Central roller support adjustment with hand crank. - Manual height adjustment, locking with pin - Height difference adjustable from 0–350 mm - Load capacity: 2,500 kg per unit - Component diameter: 200 mm – 2,000 mm - Wheels: PUR rollers Iedpefxgrdsfx Agpja - Dimensions (L/W): approx. 1,900 mm x 460 mm - Chassis track width: 1,435 mm - Rotation speed: 0 – 2,000 mm/min - Operation: Handheld remote control and foot switch

Stanje: novo, Table diameter: 900 mm Table load capacity: 1 t Swivel range: 0–135 degrees Eccentricity: 200 mm Table rotation speed: 0.12 – 1.2 rpm Iodpogvkikefx Agpea Torque: 2000 Nm Total power requirement: 0.75 kW Space requirement approx. 1.5 x 1.02 x 0.9 m The D-HB series rotary tilt tables feature a heavy-duty design for exceptional stability, making them particularly suitable for heavy and precise positioning tasks as well as rotary welding operations. Features: - Easy installation - Increased productivity - Improved weld quality due to optimal positioning and speed control - Reduced crane hours and handling times while enhancing workplace safety - Self-locking gearbox prevents overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled turntable speed - High stability through robust construction - CE certification - The D-HB series includes a remote control with foot pedal for left-right / start-stop operations.

Stanje: dober (rabljeno), številka stroja/vozila: 5336, Load capacity: 6000 kg Faceplate dimensions: 1500 x 1500 mm Iodpfx Agjgbt Sqopoa Tilting range: horizontal up to -145° Rotational speed: 0 - approx. 1 rpm Electrical connection: 400 V, approx. 5 kW Space requirements: 2800 x 2350 x 3250 mm Weight: 5000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg Handheld remote control with digital display Dual foot pedal control Isdpsd Ig H Aefx Agpja Height approx. min. 700 mm horizontal, max. height 1400 mm Faceplate diameter: 1400 mm Min. tilt angle: 135° Speed: 0.05 to 0.6 rpm Motor power: 3 kW

Stanje: novo, Leto izdelave: 2024, 5000 kg load capacity welding positioner, Iedpeig T A Rofx Agpea very robust Continuously variable speed control from 0.05 to 0.7 rpm Turntable diameter 1500 mm Tilting up to 135° Height (horizontal) 1660 mm; tilted to center 1440 mm Dimensions: length 2.4 m x width 1.48 m with remote control

Stanje: novo, Table diameter: 2500 mm Table load capacity: 20.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.04 - 0.4 rpm Torque at faceplate: 40,000 Nm Through-hole in table: 200 mm Welding current: 1000 Amps Total power requirement: 5.5 + 11.0 kW Machine weight approx.: t TURN-TILT TABLE WITH LARGE THROUGH-HOLE • Self-locking gearbox, no forward or backward movement with eccentric load. • Electronic components by Siemens and Schneider. Isdofv Axmjpfx Agpja • Frequency-controlled, very precise speed regulation. • Turntable with large through-hole and T-slots. • High stability due to clever design. • CE certification. • Excellent price/quality ratio. • The D-TLP series comes with remote control and foot pedal (left/right). No original photos. However, construction is identical.