VERTIKALNI OBDELOVALNI CENTER

DOOSAN VCF 850LSR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, CNC stružnica z 2 osmi DMC Korea DL22 Fanuc OiTD z Manual Guide in USB priključkom Letnik proizvodnje: 2012 8-palčna vpenjalna glava Prehod vretena: 65 mm Dolžina struženja: 400 mm Bedpfjxyauljx Ag Tjld Glava za 12 orodij Konjiček Korito s črpalko za hladilno tekočino

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 5.190 h, Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Leto izdelave: 2018, Control system: CELOS / F31iB5 / Mapps 4S Max. turning diameter: 670 mm Turning length: 1,538 mm Max. bar capacity: 81 mm X1-axis: 675 mm Y-axis: mm Z1-axis: 1,562 + 164 mm B-axis: ° A-axis: 1,542 mm X2-axis: 200 mm Y2-axis: +/- 40 mm Z2-axis: 1,542 mm Max. spindle speed: 4,000 rpm Blodoyfh R Hopfx Ag Tjd Drive power: 26 / 22 kW Spindle bore: Ø 91 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 18.5 kW Spindle bore: Ø 73 mm Speed range: 0 – 12,000 rpm Drive power: 28 / 23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70 / Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Number of tool holders: 10 Shank length for square tools: 20 mm Shank diameter for boring bars: Ø 32 mm Drive power: 5.5 / 5.5 / 3.7 kW Torque: 16.9 / 13.1 / 8 Nm X-axis rapid traverse: 50 m/min Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 50 m/min A-axis rapid traverse: 36 m/min X2-axis rapid traverse: 25 m/min Y2-axis rapid traverse: 18 m/min Z2-axis rapid traverse: 40 m/min B-axis rotation speed: 100 rpm Hollow clamping device: Ø 67 mm Operating hours: approx. 23,250 h Spindle hours: approx. 8 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Kitagawa hollow chuck on main and sub-spindle - Foot switch (double) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: water-soluble coolant - Chip conveyor - Coolant system 70 bar, manuf. Hydrajet - Air blow at spindle 1 and spindle 2 - Automatic measuring arm at main spindle - Workpiece ejector at the spindle - Parts unloader - Prepared for bar feeder - Interface for mist separator - 2x RotorClear - 4-color signal lamp - Multi-dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in technical data and information as well as prior sale reserved!

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Underfloor press Bjdpfx Askuz T Usg Tsld Pressing force: 300 kN Pressing area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Leto izdelave: 2003, Stanje: dober (rabljeno), Travels 560 x 410 x 510 mm, table 900 x 410 mm, 30-tool magazine, 12,000 rpm spindle, chip conveyor Bodpfx Agjiwkhks Teld

Stanje: rabljeno, Manufacturer: LORENZ Model: LS 630 Condition: Used Stock Number: DCL1722 Module: 12 Max. Diameter: 630 mm Working Stroke: 220 mm Bsdpfxewr Dx Ue Ag Teld Distance Table/Spindle Center: 450 mm Machine Weight: 10,000 kg Table Bore Diameter: 450 mm Table Diameter: 730 mm Spindle Diameter: 110 mm Distance Table to Spindle: 580 mm

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Bledpfxowgizde Ag Tsd Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 850 mm, pomik po osi Z: 750 mm, število mest v zalogovniku orodij: 36, dolžina mize: 2.200 mm, širina mize: 850 mm, model krmilnika: OKUMA-OSP-HMI, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 950 mm, moč vretenovega motorja: 22 W, število vreten: 36, hitri pomik na osi Z: 16 m/min, hitro pomikanje X-os: 16 m/min, hitri pomik os Y: 16 m/min, nos vretena: BT 50, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 50 obr/min, obremenitev mize: 2.500 kg, premer orodja: 120 mm, dolžina orodja: 400 mm, teža orodja: 20 g, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 3-axis vertical machining centre with OKUMA OSP-HMI CNC Bodpfxou Dinks Ag Tsld

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Blsdpfjph Uk Nox Ag Tjd Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm Blodpfx Ashzbipog Ted - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.