Vertikalni obdelovalni center

DOOSAN MYNX 750

Stanje: rabljeno, Leto izdelave: 2015, Pomik X 1.200 mm Pomik Y 600 mm Pomik Z 675 mm Krmilnik C 620 HSCI FS Velikost mize 1.220 x 620 mm Izmenjevalnik orodij za 40 orodij Razdalja med mizo in vretenom 735 mm Hitrost vrtenja 10.000 min⁻¹ Nsdpfx Asx Ak Hdobbscl Vreteno motor 18 kW Notranje hlajenje, dovod 30 bar - Elektronski volan. - LINEARNA MERILA. - Merilna orodja z lasersko sondo. - Priprava za merilno sondo za obdelovance. SONDA NI VKLJUČENA.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² Ncjdpfx Absw Rl S Sebsl 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Double-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Nedpfevxu Easx Abbscl Bar feeder interface Coolant system with separate 200 l tank Cooling unit High-pressure at turret 1-3 via M-function 15 bar / 40 l/min 2x Brinkmann pumps Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub spindle (IKZ), Deublin rotary union Hinged belt conveyor Transformer Immediately available

Stanje: zelo dobro (rabljeno), Fixed bed milling machine Zayer model KF 3000 with Heidenhain 355 CNC, equipped with an external computer for CAD/CAM, table size 3000mm x 1000mm, travels: longitudinal 2700mm, cross 1250mm, vertical 1000mm, rapid feed 15,000mm/min, Huron head ISO 50, head speeds: 3 ranges up to 3000 rpm variable, recently overhauled Huron head with new gear pair and all bearings replaced in the head. Power 30 kW, maximum table load 10,000kg. Machine in good condition. Machine weight: 25 tons. Nedpfsvdv Tcox Abbecl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Nedpfxou Dm E Hj Abbjcl Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Nsdpfsw Ucyuex Abbocl Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 193 34-41, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.600 mm, obremenitev mize: 2.500 kg, premer vretena: 102 mm, hitrost vretena (min.): 4 obr/min, največja hitrost vretena: 1.600 obr/min, skupna višina: 3.500 mm, skupna dolžina: 6.500 mm, skupna širina: 4.700 mm, dolžina mize: 1.400 mm, širina mize: 1.250 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj bol v roku 2025 repasovaný a modernizovaný, je okamžite pripravený na použitie! Pojazdy: - Priečny pojazd stola (os X): 1600 mm - Pohyb vretenovej hlavy (os Y): 1250 mm - Pozdĺžny pojazd stola (os Z): 1475 mm (obmedzenie v dôsledku veľkého stola) - Pohyb vretena (os W): 710 mm - Otoč stola (os B): 360 stupňov Upínací stôl: - Upínacia plocha: 1250 x 1400 mm - Zaťaženie stola: 2,5 t Vŕtacie vreteno: - Priemer: 102 mm - Upínanie nástroja: DIN2080 50 SK - Plynulá regulácia otáčok: 4 - 1600 ot/min - Výkon pohonu: 13 kW Posuvy: - Osi X, Y, Z, plynule: 1 - 4000 mm/min Rýchloposuv: - Osi X, Y, Z: 4 m/min Pripojovací výkon: 42 kW Hmotnosť: 10 t Potrebný priestor (D x Š x V): 6,5 x 4,7 x 3,5 m Vybavenie: Nedpfx Asw Rn R Robbocl - Heidenhain TNC 320 - Zariadenie na chladenie

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.134 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, model krmilnika: HASS, širina mize: 914 mm, dolžina mize: 2.134 mm, obremenitev mize: 1.800 kg, skupna masa: 11.340 kg, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 7.500 obr/min, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 864 mm, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 406 mm, premer orodja: 63 mm, teža orodja: 5.500 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center with HAAS CNC Nsdpewrfamjfx Abbjcl

Stanje: rabljeno, Leto izdelave: 2008, Obrat nad posteljo 923,8 mm Obrat nad prečno sani 755 mm Maks. premer struženja 356 mm Maks. dolžina struženja 510 mm X/Z pomiki 260/590 mm Vretenasti obrati 5000 obr/min Revolver z 12 postajami Premer vretenaste luknje 73 mm Krmiljenje: MSX-850 III Ncodpfx Aju Sn Hzsbbol Opremljeno z: Vpenjalna oprema s kleščami Odvajač odrezkov 3 standardni nosilci za orodje Brez portalnega nakladalnika (ni vključen).

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. Ncsdpfx Asr Ui R Njbbjl OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.