Obdelovalni center

DMG MORI DMC 80U

Stanje: dober (rabljeno), Ponujamo vam: 6 kos palet za DMC 80 U Dedpfx Apoyvqfveleut Pribor, prikazana orodja in vpenjala so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah ter vmesne prodaje!

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Dusdpfjqhkukex Aplst Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Pomik X/Y/Z: 1000mm/500mm/635mm, držalo orodja: BT40, hitrost vrtenja: 10.000 obr/min, mesta za orodja: 40, krmiljenje: Haas, ure vretena: ca. 4500h. 3-osni robotski sistem System 3R WorkPartner, leto izdelave: 2005, prenosna teža: 80kg, hod: 1500mm, mesta za palete: 20. Vključuje ničelno vpenjalni sistem System 3R GPS 240, merjenje orodja, kontrolo loma orodja, 3D merilno tipalo Renishaw in odsesavanje oljne meglice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dsdsxg Riaopfx Apleut

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Dujdpfx Asw Intaeplet Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Stanje: novo, moč: 25 kW (33,99 KM), potovalna razdalja osi X: 1.430 mm, pomik osi Y: 670 mm, pomik po osi Z: 640 mm, teža obdelovanca (maks.): 1.200 kg, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.900 mm, skupna dolžina: 4.855 mm, skupna širina: 2.945 mm, skupna masa: 11.000 kg, Oprema: CE označba, dokumentacija / priročnik, LAGUN L 1400 Machining Centre – Available at Short Notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and efficient manufacturing. Ideal for single-part production as well as series manufacturing in mechanical engineering, tool and mould making, and subcontracting. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / hire purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is known for robust design, high dynamics, and long-lasting machine concepts. The machining centres impress with their reliability, easy maintenance, and low operating costs. Technical features: Control: HEIDENHAIN TNC 7 CNC control + 16" TFT monitor HEIDENHAIN motors, measurement systems and electronic handwheel HR 510 Chip removal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Full enclosure with side opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply Dujdpfxehy Atfj Apljt ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a customised offer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Dusdpfx Apjx Nkp Uoljt Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, Dedpfx Aopumdcjpleut NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Leto izdelave: 2023, stanje: novo, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for heating oil storage, compliant with EN 12285-2 standard. Nominal capacity: 10 cbm, new, EN 12285-2 standard Color finish: RAL 7035 paint Material: steel-in-steel, material grade S235JRG2 Documentation: manufacturer's certificate / type plate Includes: - 1 dipstick - 1 vent connection - 1 fill connection - 1 new overfill prevention - 1 new leak detection device - 1 ladder - 1 suction line Duedpfx Apek Dpv Ajlst Tank dimensions: approx. 5,300 mm (length) Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Installation: above-ground storage Delivery time: September With best regards from Warstein, Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Stanje: novo, Leto izdelave: 2026, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 Duedpoiq U Aysfx Apljt ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Leto izdelave: 2025 Stanje: Razstavni eksponat Dujdpfxjw Ty S Sj Aplet Specifikacije: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE