Grelnik

DIGICOLOR

Stanje: rabljeno, Granulate dryer, granulate drying unit, granulate conveyor, vacuum conveyor Ijdpfopz Sgfex Adkehw -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: stainless steel (VA) -Individual components/dimensions: see photos/technical drawing -Overall dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.100 mm, moč: 46 kW (62,54 KM), razdalja med središči: 2.000 mm, delovne ure: 1.200 h, Na voljo je stružnica DMT CD1100 z upravljalnikom Heidenhain in samo 1200 delovnimi urami. Območje obdelave zajema premer vrtenja okoli 1100 mm nad ležiščem in okoli 800 mm nad planskim suportom. Nosilec za orodja je Multifix D1. Razdalja med konicama znaša 2000 mm. Glavni pogon vretena je motor z močjo 46 kW pri 60 % ED s dvema prestavnima stopnjama. Konjiček: - Premer pinole: 125 mm - Stožčasta nastavitev: 6 Mk Ijdexlza Hepfx Adkjhw Dobava: Osebni prevzem Plačilo: 100 % pred prevzemom z bančnim nakazilom takoj po izdanem računu Vsi podatki so nezavezujoči, vmesna prodaja pridržana. Stroj se prodaja brez garancije in ostane v naši lasti do popolnega plačila.

Leto izdelave: 1999, stanje: dober (rabljeno), Granulate dryer, compressed air dryer, continuous dryer, granulate drying system - Manufacturer: digicolor, Granulate dryer type Dehumidifying Dryer - Model: DT 204 M - Power: 10,000 W - Side channel blower: Siemens Elmo-G 1.5 kW - Individual components: see photos - Dimensions: 1020/610/H1550 mm - Weight: 241 kg Ijdpfx Adjlb Iv Njkjhw

Stanje: dober (rabljeno), Granulate dryer, granulate drying system, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: stainless steel Iedpfxowuppks Adkohw -Individual components/dimensions: see photos -Overall dimensions: 260/250/H830 mm -Weight: 13.6 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, delovna širina: 4.100 mm, globina grla: 250 mm, skupna masa: 20.000 kg, stiskalna sila: 200 t, Hämmerle BM200-4100. Stroj je bil leta 2023 demontiran v stari tovarni, v novi pa ni bil ponovno postavljen ali zagnan. Od takrat je stroj v skladišču. Vsa pripadajoča oprema in dokumentacija sta priloženi. Stroj je možno kadar koli ogledati in je takoj pripravljen za nakladanje. Vsi podatki so navedeni na slikah... Ijdswa S Dnopfx Adkehw Orodja niso priložena, saj ustrezajo novi napravi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Ihsdpjh Rawbofx Adksw Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Betriebsstunden: 200

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: Ijdpfxsg Ezarj Adkshw - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 0 278 06 1192, širina folije: 700 mm, premer valja: 700 mm, Used roll slitting machine, make: Friz. One set of knives has been resharpened. Iodpfev Radxsx Adkohw The machine is pre-owned and is sold without warranty. Inspection is possible and encouraged. Loading facilities available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Lifting capacity max. 1 ton at 5.3 meters Iodpfxoq N E U Aj Adkehw Operating hours: 270 h Electric: yes

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Ijdpfet Hw H Eox Adkjhw Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!