Naraščajoči tekoči trak Dovodni trak Transportni trak

die magnetprofis

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt including mobile underframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at the bend: 40 degrees each Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminum construction, heavy-duty version! PU conveyor belt including cleats and corrugated sidewalls Drive: 0.55 kW motor (adjustable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and electrical components ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch 2-ply, particularly cross-rigid Gjdpfx Asyt Ia Dsb Ejtw Corrugated sidewalls, cleats, and endless belt high-frequency welded In the bend area, the belt is guided on both sides by four hold-down rollers each. The belt is designed with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, calculated as follows: (top view) Transverse layout 100+50+400+50+100 mm Demonstration unit - Available immediately! - Can be inspected under power All prices are net prices plus 19% VAT All information subject to change, while stocks last!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, CNC brusilni stroj za orodje Walter Helitronic Power FH, letnik 2015, upravljanje Fanuc, s paletnim nakladalcem za valjaste obdelovance, palete od 4 mm do 25 mm, menjalec brusnih plošč za 8 pozicij, elektrostatični filter za dim, protipožarna naprava, programska oprema Walter-Window-Mode in Toolstudio, programski paketi: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, s predpripravo za hidravlično enoto (luneta), brusilno vreteno (eno-vreteno) je neposredno gnano in opremljeno z oljnim hladilnikom. Motor s votlo gredjo za os A ima obrate 0-750 1/min. Osi C, X, Z in A so bile leta 2022 obnovljene. Gjdsyh Dl Nepfx Ab Eetw

Leto izdelave: 2025, obratovalne ure: 5 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025112701, Aluminum Inclined Conveyor Belt with Support Structure including adjustable leveling feet and machine feet for compensating uneven floors - Infeed height: 500 mm Godeydb Rwopfx Ab Eetw - Inclined section: 3,000 mm - Discharge height: 2,000 mm Design: Aluminum construction profile - Triple-profile reinforced 135x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum + return drum made of S235 steel, welded and machined Ø150x620 mm, crowned, precision turned; shaft fixed with tension bearings. Drive: Shaft-mounted geared motor 1.10 KW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection rating IP54 Drive prewired to motor terminal box (Commissioning must be performed by a certified electrician) PVC Conveyor Belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. wave-edge profiles, 80 mm high, 50 mm wide, edge-aligned, high-frequency welded 18 pcs. T60 cleats, 430 mm long, spaced approx. 508 mm, center-mounted and welded Belt material: 2-ply, especially cross-stable Due to the wave-edge profiles on both sides, the usable width of the conveyor belt is reduced: Usable width 500 mm, as follows: (top view) Cross arrangement 50+500+50 mm

Stanje: novo, Leto izdelave: 2026, Aluminium Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminium modular construction for reliable handling of piece and bulk materials – ideal for industry, trade, recycling, wood processing, and more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveying routes. _____ Technical Data (Sample Configuration): ✔ Feed height: individually adjustable ✔ Inclined section: selectable lengths ✔ Discharge height: individually adjustable ✔ Substructure incl. adjustable feet & machine feet or with transport rollers → For levelling uneven surfaces / stable placement _____ Design / Frame: ✔ Aluminium modular construction ✔ 2-profile 90x45mm or 3-profile reinforced 135×45mm ✔ Continuous carry plate 2.0 mm galvanized steel or 1.4301 stainless steel _____ Rollers / Drive: ✔ Drive roller & return roller made of S235 steel, welded & machined ✔ Ø100, 150 or 220 mm ✔ Shafts mounted with tension bearings ✔ Drive: Shaft-mounted gear motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Power supply 230/400V, 50Hz, protection class IP54 (standard) ✔ Drive ready for connection up to the motor terminal box ➡️ Commissioning by a qualified electrician required _____ Conveyor Belt / Carriers: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt width: 100,200,300,400,500,600,700,800,900 or even 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with high cross stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: individually adjustable ✔ Pitch individually adjustable _____ Options / Accessories: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers Gtedpfeyhzpljx Ab Ejw ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as requested _____ ✔ Custom manufacturing to customer specification ✔ Industrial quality “Made in Germany” Dimensions, versions & price on request Just send us a short message – we provide quick and uncomplicated advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customised solutions for the recycling, food, and processing industries. Our diverse product portfolio includes everything from conveyor belt systems, flat conveyors, incline conveyors, and angle conveyors to Z-conveyors. Additionally, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we individually adapt our solutions to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right answer—there’s no such thing as a special order for us! Challenge us! Contact us and discover how we can turn your requirements into tailored solutions. Let’s shape the future of your production processes together!

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Bobst SP 142 ER Year: 1987 Max. sheet size: 1020 x 1420 mm Min. sheet size: 700 x 520 mm Max. speed: 6,000 sheets/hour Max. cutting force: 600 t Centerline system Micrometric adjustment Gtjdpfovhcgqex Ab Eew Currently in production

Leto izdelave: 2026, stanje: novo, Robust steel construction – designed for continuous operation The base structure consists of a heavy-duty construction steel frame, manufactured from laser-cut, bent, and welded components. The surface is finished with high-quality powder coating in RAL0208. Modular Design: Our conveyor belt frames are available in transportable sections. This makes the system: - Easy to transport and assemble - Extensible or retractable at any time - Ideally suited for later modifications or system adjustments Conveying Technology & Troughing Idlers The troughing roller assembly on the return side is designed for smooth and reliable operation: - Shaft Ø: 60/15 mm - Roller station spacing: approx. 500 mm (customisable) - In the loading area, a narrower roller spacing can be provided on request for increased load capacity Drive & Rollers The drive roller and tail roller are made of S235 steel, welded and precisely machined: - Ø 220 × 700 mm, crowned surface - Shaft secured with tension bearings - Bearing points with heavy-duty UCF flange bearings incl. grease nipples Drive unit: - Gearmotor: Hydromec worm gear, 1.1 kW - Belt speed: approx. 1.15 m/s - Connection: 400V / 50 Hz, protection class IP54 - Drive unit pre-wired up to the motor terminal box (Commissioning must be performed by a qualified electrician) - Motor mounted on the right in conveying direction, in pulling configuration Conveyor Belt A durable, industrial-grade belt is used: - Type: DM EP250/2, 3+1.5 cover - Chevron profile, 17 mm high, 650 mm wide - Splice area without profile - Endless hot vulcanised Custom Options & Accessories (as required) Thanks to its modular construction, all components can be precisely tailored to your process, for example: ✅ Special lengths & widths ✅ Side plates / wavy edges (for lateral guidance and increased conveying stability) ✅ Infeed/receiving plates (wear-optimised, gentle on materials) ✅ Loading/infeed hoppers (for clean bulk feeding) ✅ Discharge plates / chutes ✅ Cleated profiles / alternative belt qualities Gsdpfx Absyhznns Eotw ✅ Adjustment of roller spacing & idler geometry ✅ Special paint coatings / customer-specific designs

Leto izdelave: 2026, stanje: novo, DM flat conveyor belt type FB-700 without supporting structure for conveying bulk materials Conveyor length: 6,000 mm Belt width: 650 mm Welded and bent structural steel construction, laser-cut Base frame powder-coated in RAL 5015 Modular conveyor frame construction / segments available in transportable lengths. Frame construction can be extended or shortened at any time. Return roller construction (idler rollers) in the lower run, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Narrow roller spacing in the feed area Drive drum and deflection drum made of welded and machined S235 steel Ø220 x 700 mm, crowned and turned, shaft fixed with bearing units. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/s Connection: 400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box Gtedpfx Aboyhznhj Esw (Commissioning must be carried out by a qualified electrician) Motor mounted on right side in conveying direction, pull configuration. Bearing locations equipped with robust UCF flange bearings incl. grease fittings. Rubber conveyor belt DM EP250/2 3+1.5 top cover Chevron profile 17 mm high x 650 mm wide Joint area without profile, endless hot-vulcanized

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius Gsdpfxjtrd T Te Ab Estw – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR

Stanje: novo, Leto izdelave: 2026, Aluminum angled conveyor belt with substructure including leveling and adjustable machine feet for compensating uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Knee angle: 45° Height of the horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Reinforced double profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller made of welded and machined S235 steel Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matt Belt width: 600 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, highly cross-stable At the angled section, the belt is guided on both sides with three hold-down rollers each Belt is supplied with a 70 mm edge-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced Usable width: 300 mm, calculated as follows: (Top view) Cross configuration 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide rib on the running surface profile – 10x6 mm - Including widened substructure for head load stability - Including cut-out in the discharge plate Gtjdpfx Aeyhzhzeb Ejw - Including slide bearings in the drive and return roller - Including magnet-free zone for overband magnetic separator area - Including bracket for DMPM1200 in the incline section Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat belt conveyors, inclined conveyors and angled conveyors, to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnet separators, and dosing bunkers – all tailored to customers’ specific requirements. We understand that each industry and project is unique. That’s why we custom-build our solutions to meet your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution – no matter how specialized the requirements! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separators, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Aluminum angle conveyor with support frame including adjustable feet and machine leveling feet for compensating uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length (measured on the floor): 5,000 mm Discharge height: 2,000 mm Horizontal height: 500 mm Design features: Aluminum modular construction - Reinforced triple profile 135x45 mm - Fully covered 2.0 mm galvanized steel discharge plate Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with pillow block bearings. Drive: Direct-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Gjdpfeyhzhuex Ab Ejtw PVC conveyor belt DM 15/4 0+007 PVC incl. wave-edge PVC, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, with high transverse stability In the bend, the belt is guided on each side by 3 hold-down rollers. Belt has a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! As an innovative mechanical engineering company, we take pride in offering tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-shaped conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnets, drum magnets, and dosing bunkers—all designed according to our customers’ specific requirements. We understand that every industry and project is unique. That is why we customize our solutions to your specific wishes and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special orders—for every problem we find the right solution! Put us to the test! Contact us and discover how we can turn your requirements into tailored solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grates, magnetic grids, metal separators, block magnets, filtration systems, dosing bunkers, feed hoppers, filling systems

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Bluhm Weber Legi-Air 4050 labelling machine Further units in stock! Year of manufacture: 2016-19 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Stamping sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm, Label lengths must be accordingly limited. For certain label materials, longer or smaller labels are possible with special tampers. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 running metres, 76 mm (3") core, outer winding (optional inner winding) Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm, Applies to systems with 250 mm stroke Controller display: Multilingual operator guidance Gtsdpefp A I Eefx Ab Eow 5.7" VGA touch display Service interval indicator Recall, edit and save label data USB port for storage device or keyboard Compressed air connection: 6 bar – compressed air must be clean, dry, and oil-free.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm Godjyhzhnspfx Ab Eotw - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Stanje: novo, Leto izdelave: 2026, Aluminum inclined conveyor belt with substructure including adjustable leveling feet and machine feet for compensating unevenness - Infeed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Reinforced triple profile 135x45 mm - Continuous discharge sheet 2.0 mm, galvanized Drive roller + return roller made of S235 steel, welded and machined Ø150x620 mm, crowned and finish-turned, shaft mounted with tension bearings. Drive: Flange-mounted geared motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box Gedpfxoyhzhbs Ab Eotw (Commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped joint Belt material: 2-ply, exceptionally cross-stable 2 pcs. corrugated edge profiles, 80 mm high, 50 mm wide, edge-flush high-frequency welded 14 pcs. T60 cleats, 400 mm long, spacing approx. 296 mm, centered welded Belt material: 2-ply, exceptionally cross-stable Due to corrugated edges on both sides, the usable belt width is reduced: Usable width 500 mm, determined as follows: (Top view) cross arrangement 50+500+50 mm

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Two complete injection molding production lines with two Husky injection molding machines, five complete molds with metal separators, Motan gravimetric dosing systems, and crane systems are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2,424g, max. PET throughput: 390kg/h. Gtjdpsw Az Riefx Ab Esw 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. 6) 48-cavity H-PET-AE mold. Overall system dimensions (LxWxH): approx. 24m/13m/5.5m. Includes drying unit, mold dehumidification, color dosing equipment, and T-belt conveyor. Documentation available. On-site inspection possible.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WKZ45-1030, CLEARANCE SALE, EX-STOCK MACHINE! We cordially invite you to visit our technical center to personally verify the quality and functionality of our equipment. Godpev Tdq Ijfx Ab Eetw Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta starter, automatic shut-off during idle - Hydraulic ram equipped with pressure plates - Siemens PLC control system - Optionally available with control cabinet extension for discharge conveyor belt + overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence is delivering exactly what the customer truly needs. We work closely with our customers to develop tailor-made, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge conveyors, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filter systems All prices are net, plus 19% VAT. All information subject to change, while stocks last!