Standardni vlačilec

die magnetprofis DMPM800

Stanje: generalkompletno obnovljen (rabljeno), Hosokawa Mikropul ACM 10 Fine Grinding Mill / Classifier Mill with New Control Cabinet and Accessories We are offering a Hosokawa Mikropul ACM 10 fine grinding mill in excellent condition – an ideal solution for precise grinding and classification of powders and granulates. Hedpfx Aevn Riajg Tsi Technical Data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good (completely overhauled), equipped with a newly built control cabinet Additional Details: • Classifier screen available: A corresponding classifier screen is also in stock. • Comparable mills: We have similar/analogous mills in stock that operate on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves production floor space • Energy-efficient: Optimized for lower power consumption • Versatile use: Suitable for processing chemicals, foodstuffs, pharmaceuticals, and more Condition and Inspection: The machine is ready for immediate operation and can be inspected by appointment. We also offer technical accessories and spare parts for seamless integration into your production process. Contact us for further information or a personalized quote.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION Hjdpfx Ascggy Sjg Tsi - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Feeding chamber dimensions: 280x580 mm, loading height: 700 mm, maximum load: 300 kg, equipped with safety enclosure and documentation. The machine was fully operational until recently; however, a complete maintenance service is required. Inspection is possible. Hodpfxsqgfbge Ag Tsi

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Hjdpfx Ajifi D Tsg Tji Dobava: EXW Székesfehérvár

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.850 mm, skupna širina: 4.190 mm, skupna dolžina: 11.300 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 22.000 kg, CNC indeksirna rezkalna glava (2,5°) transportni trak za ostružke je vključen Opcijsko: stroj je lahko opremljen s povsem novim krmilnikom Heidenhain 320 Premik v vzdolžni osi X: 6500 mm Prečni pomik po osi Y: 900 mm Vertikalni pomik po osi Z (višina): 1600 mm Hjdpfx Agsxpgfvs Toi Dimenzije vpenjalnega prostora – miza: 8000 x 800 mm Moč na vretenu: 22/26 kW Vpenjalo rezkalne glave (ISO): ISO 50 Največje območje vrtljajev: 20 > 3000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Prodajam tračni transporter, viden na slikah, dolžine približno 7,5 m. Širina traku je 0,3 m. Možen prevoz. Hodpfxjr Nvx Uo Ag Tei

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Hjdpfx Ageq D Dzls Toi Bending length: 3020 mm Press force: 220 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height: 600 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2555 mm Machine length: 3730 mm Machine width: 2290 mm Overall height: 3055 mm Table height: 820 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 11,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Ram double-guided, stable and precise - Robust backgauge, double-guided - Manually adjustable backgauge fingers, double-guided on linear rail - Movable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T control - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Other working lengths and capacities available with the appropriate accessories!

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Hedpfob Nulhox Ag Tei Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Leto izdelave: 2022, Stanje: novo, Aluminum angle conveyor belt with substructure Conveyor belt length: 1000 mm horizontal + 2400 mm inclined Incline angle at bend: 45° Discharge height: approx. 2000 mm Height at horizontal section: 300 mm top edge PPU conveyor belt FDA food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width: 400 mm Hjdpfx Agjht U Tde Tei T20 cleats welded - pitch 202 mm * Antistatic due to filaments in the running side fabric Endless finger-spliced with stepped finger joint 30 mm high corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Cross arrangement: -70/+35/-5/+190/-5/+30/-70 mm Full-surface support plate Drive: Motor approx. 0.25 kW Belt speed approx. 0.3 m/sec Connection: 220/400 V, 50 Hz, protection class IP54 Our core competence is delivering precisely what the customer really needs. We collaborate with our customers to develop tailor-made, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grid magnets, metal separator, block magnet, filtration systems.

Leto izdelave: 2001, obratovalne ure: 123 h, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement. Hsdpfxoftdv Us Ag Tsi