Pnevmatski kotni vrtalnik 45°

Desoutter D315-S-1050

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ► 40 ft HIGH CUBE (HC), rabljen, primeren za pomorski transport ◄ ✍️ Dimenzije Zunanje: 12.192 x 2.438 x 2.896 mm (D x Š x V) Notranje: 12.032 x 2.352 x 2.698 mm (D x Š x V) Odpiranje vrat: 2.340 x 2.585 mm (Š x V) ⚙️ Oprema: Vetrotesen in vodotesen Cargo worthy (primeren za mednarodni transport) Fpjdpfx Aasy Ihn Ss Rjp Popravljen in takoj pripravljen za uporabo 5 let veljaven CSC certifikat (primerljiv s "TÜV") ⤴️ Dodatne storitve po dogovoru: Individualne prilagoditve, kot npr. predelave, prebarvanje itd. mogoče ⚡️ Hitra dobava, vključno z razkladanjem po dogovoru Za neobvezujočo ponudbo navedite poštno številko _____ ✅ Z veseljem vam pripravimo ponudbo po meri.

Stanje: rabljeno, številka stroja/vozila: 697, prevoženi kilometri: 32.242 km, moč: 132 kW (179,47 KM), prva registracija: 01/1995, vrsta goriva: dizel, lastna masa: 9.500 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 11.800 kg, velikost pnevmatike: 9r22,5, konfiguracija osi: 4x4, zavore: retarder, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, vzmetenje: jeklo, obratovalna teža: 18.200 kg, Oprema: ABS, hidravlika, kompresor, pogon na vsa štiri kolesa, retarder, spojka prikolice, zapora diferenciala, žerjav, TÜV will be newly issued, truck registration. The Steyr is in exceptionally good condition, coming directly from the authorities (Swiss Army). It has been excellently maintained and serviced with a full service history, see photo. The bodywork is in superb condition. The 12S18 is equipped with: all-wheel drive, rear differential lock, two front seats (a third seat can be retrofitted), rear-mounted loading crane with a reach of 5,400 mm, – lifting capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, – MKG crane type HLK 73a1, also equipped with a Rotzler cable winch, type HK 022 with 10 mm steel cable for lifting or lowering loads into or out of shafts at the crane tip, – the crane supports have a manual extension to avoid obstructing off-road capability. – Tire size 9R22.5, gearbox with 6 speeds plus low-range gearing, fitted with a speed limiter, unladen weight 9,500 kg, gross weight 11,800 kg, engine displacement 6,592 cm³, 24V electrical system. On delivery, the Steyr will not only have a new TÜV certificate but will also run reliably :-) – This Steyr is suitable as a hobby vehicle but is also well-suited for daily work. - All my vehicles can be viewed on my homepage. Fpodeqx Sznspfx Aa Rop You’ve been traveling from Flensburg to Berchtesgaden to look at various vehicles, but here you’ll find over 150 vehicles such as: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, Mercedes-Benz, etc. – and all with TÜV. Additionally, there is an incredible selection of spare parts and accessories. – Why settle for less? – Give me a call at 0049 (0)2248. Regards, Philipp

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, SCHORR Log Splitter 22t HS-22P PRO With a splitting force of 22 tons, the HS-22P PRO easily handles the toughest wood and thick trunks. Its robust construction (290 kg net weight), low-wear hydraulic system, and high-strength steel frame ensure long service life, maximum stability, and reliable operation—even under continuous use conditions. PTO Drive – Direct via Tractor Equipped with a PTO drive, the HS-22P can be coupled directly to your tractor. This offers outstanding mobility and independence from external power sources—ideal for use in forests, meadows, or farmyards. The splitter features stable power transmission and a high-performance hydraulic pump for efficient and speedy splitting cycles. Heavy-Duty Construction – Built for Tough Jobs The design relies on high-strength steel components and a robust splitting wedge guide. Solid support feet provide firm stability, and large transport wheels facilitate easy repositioning—even on uneven terrain. Splitting Length up to 110 cm Long log sections can also be processed without difficulty. The solid, tool-steel splitting knife guarantees precise splitting lines and minimal wear. Integrated Log Lifter – Increased Comfort & Safety The integrated log lifter enables effortless positioning of heavy trunks and also serves as a safety guard—greatly simplifying daily operations. Two Return Modes & Speed Settings -- Automatic return: The splitting wedge automatically retracts to the preset position—ideal for fast operation. -- Manual return: For precise splitting, especially when processing irregular wood. Additionally, there is a fast approach mode and a slow, high-torque mode for actual splitting. Practical Features for Everyday Use -- Hydraulic cylinder can be lowered (down to 1.99 m) for easy transport and compact storage -- Two-hand safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor mounting Technical Data -- Manufacturer: SCHORR -- Model: HS-22P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: Fedew Smm Topfx Aa Rjpp -- Length: 1300 mm -- Width: 1450 mm -- Height: 2470 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 11.5 cm -- Piston rod: Ø 6 cm -- Splitting wedge: 22 cm -- Splitting diameter: max. 35 cm / min. 8 cm -- Wedge-floor clearance: 20 cm Speed: -- PTO: Advance 8.0 s / Return 9.0 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty construction—290 kg net weight for top stability -- Flexible operation—tractor powered -- Convenient log lifter for heavy timber -- Spare parts always available -- Expert service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Stanje: novo, Leto izdelave: 2024, vrsta goriva: električni, SCHORR Electric High-Lift Stacker with Free Lift, 1200kg Load Capacity -- Available lift heights: 2500mm / 3000mm / 3500mm -- Ideal for spaces with low ceiling heights -- Mast only extends above the fork carriage height (FREE LIFT) -- Fully electric & self-propelled with various driving modes -- Includes 24V 100Ah gel batteries (maintenance-free) and integrated charger -- High-quality, waterproof CURTIS controller -- Polyurethane wheels: durable and wear-resistant -- Multiple drive programs (including "Turtle" / "Slow Mode") -- Stable positioning thanks to electromagnetic brakes -- High-performance hydraulic pump Thanks to its free lift function, the stacker is particularly suitable for warehouses and rooms with low ceiling heights. The mast only extends above the fork carriage height, enabling safe and effective operation in confined spaces. Depending on the chosen variant, it achieves a lift height between 2500mm and 3500mm. Pricing by lift height / variant: 2500mm lift height: €3199 3000mm lift height: €3219 3500mm lift height: €3239 Fork length is suitable for standard Euro pallets (fork length: 1150mm). The two built-in 12V gel batteries with a combined capacity of 100Ah provide a runtime of up to approximately 4 hours. Charging the stacker is simple: just connect to any standard 230V socket and the stacker is ready for use again in no time. The stacker is equipped with a high-quality, waterproof CURTIS controller, allowing short-term use in damp or cool environments. The ergonomically designed tiller enables intuitive control. Key control elements such as the battery charge indicator, emergency stop, and keys are centrally located and always in the operator's line of sight. Alongside the normal travel speed of approx. 4.2 km/h, it features a creep mode. Creep mode allows slow and precise maneuvering, giving operators full control even in narrow aisles and storage racks. Technical Data: Load capacity: 1200kg With free lift Lift heights: 2.5m / 3m / 3.5m (depending on model) Motor power: 750W Weight: 465kg Lifting speed: -- Loaded: 83mm/s -- Unloaded: 136mm/s Lowering speed: -- Loaded: 112mm/s -- Unloaded: 98mm/s Fsdpfxomv Ek Ie Aa Rspp Gradient capability: -- Loaded: 6% -- Unloaded: 8% Turning radius: 1366mm Whether you want the stacker delivered, or prefer to pick it up at our location in 48465 Schüttorf, we have a solution to suit your needs. Please contact us. To make pickups & viewings as convenient as possible, please note that these are only possible by prior phone appointment. Interested in financing or leasing this equipment? No problem! We also offer attractive options—simply get in touch and we will be happy to advise you on the available solutions. We look forward to your inquiry! The SCHORR team is happy to answer any questions you may have regarding our stackers. You can reach our knowledgeable staff by phone or email. We look forward to hearing from you and assisting with your requirements.

Stanje: novo, Leto izdelave: 2026, Paletni viličar WRHS 1013 je izjemno robustna in učinkovita naprava, zasnovana za transport in dvigovanje težkih palet v skladiščih, proizvodnih halah in drugih industrijskih okoljih. Zahvaljujoč impresivni nosilnosti 1000 kg in višini dviga 1300 mm, ta viličar zagotavlja veliko prilagodljivost in je sposoben obdelovati palete z velikim številom izdelkov, kar ga idealno prilagaja potrebam vsakega delovnega mesta. Glavne Prednosti Viličarja WRHS 1013 Nosilnost do 1000 kg – omogoča transport velikih in težkih tovorov, kar zagotavlja zanesljivost v zahtevnih skladiščnih pogojih. Višina dviga 1300 mm – omogoča enostavno shranjevanje palet na regalih in skladiščenje blaga na različnih višinah. Ergonomičen ročaj – olajša upravljanje viličarja, poveča udobje pri delu in zmanjša tveganje poškodb operaterja. Visoka stabilnost in varnost – jambor viličarja zagotavlja stabilnost med dvigovanjem in spuščanjem tovorov, kar se odraža v varni uporabi. Robustna konstrukcija – trpežna in vzdržljiva, kar zagotavlja dolgotrajno uporabo v zahtevnih delovnih okoljih. Enostavna manevrabilnost – viličar je opremljen s kolesi, ki se lahko vrtijo, s premerom 150 mm, ter valjčki na vilicah dimenzij 80 x 60 mm, kar zagotavlja veliko okretnost in udobje pri delu na različnih površinah. Konstrukcija in Tehnologija Viličarja WRHS 1013 Viličar WRHS 1013 združuje sodobno tehnologijo in vzdržljivost, zaradi česar je zanesljiva izbira za strokovnjake. Opremljen z jamborom, ki zagotavlja stabilnost, je ta viličar odporna na mehanske poškodbe in omogoča popoln nadzor nad tovorom med dvigovanjem. Zahvaljujoč ergonomičnemu ročaju lahko operater udobno upravlja napravo, kar poveča učinkovitost dela in zmanjša utrujenost. Viličar WRHS 1013 se odlikuje po visoki kakovosti izdelave, kar zagotavlja dolgotrajno uporabo tudi v zahtevnih industrijskih pogojih. Hidravlična črpalka omogoča natančno dvigovanje tovorov, robustni valjčki na vilicah (80 x 60 mm) in kolesa, ki se lahko vrtijo (150 x 50 mm), pa zagotavljajo ustrezno mobilnost in stabilnost tudi na neravnih površinah. Standardna Oprema Jambor, ki zagotavlja stabilnost med dvigovanjem in spuščanjem tovorov Ergonomičen ročaj za enostavnejše upravljanje viličarja Fedpfx Aoricbcoa Ropp Hidravlična črpalka za natančno dvigovanje tovorov Kolesa, ki se lahko vrtijo, 150 x 50 mm, in valjčki na vilicah 80 x 60 mm Robustna jeklena konstrukcija, ki zagotavlja visoko vzdržljivost Tehnične Specifikacije Viličarja WRHS 1013 Nosilnost 1000 kg Višina dviga 1300 mm Dolžina vilic 1150 mm Zunanja širina vilic 550 mm Širina med vilicami 230 mm Višina z spuščenimi vilicami 1670 mm Višina z dvignjenimi vilicami 1670 mm Minimalna višina vilic 90 mm Skupna dolžina 1600 mm Skupna širina 750 mm Polmer zavijanja 1200 mm Kolesa, ki se lahko vrtijo 150 x 50 mm Valjčki na vilicah 80 x 60 mm Teža 179 kg

Stanje: kot nova (razstavni stroj), Scope of delivery includes: 01x Waste container, 2nd choice Manufacturer: SSI Schäfer Capacity: 770 l Depth with lid closed = 770 mm Depth with lid open = 840 mm Height 1,360 mm (lid closed) Fodpfxjk Nl Hue Aa Repp Overall width: 1,380 mm Material colour: black Wheels: 4 wheels (2 braked) Material: Polyethylene (PE) Dead weight: 68 kg Note: Usable width and usable depth taper conically downwards. General information about the item: This item is only available for collection. Delivery or shipping can be arranged at additional cost, which can be quoted separately depending on the destination and scope of delivery.

Leto izdelave: 2014, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: 6151656290, Desoutter Cordless Angle Shut-off Screwdriver ELS15-480-A Demonstration tool with 230 V charger + 2 batteries (18 V 2.6 Ah) No-load speed: 200 to 480 rpm Torque range: 5.0 to 15 Nm Drive: 3/8" square Length: 410 mm Fedpfxscr H Eao Aa Rjpp Weight without battery: 1.2 kg