Bencin 170-500bar 16-46l/min.

DEN-JET CP22

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3 m/min Crab travelling speeds 20/5 m/min Rsdpfovx E I Sox Aabjn FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Multiple units immediately available from stock

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Rsdpfxsf Nku Ro Aabjn Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Redefzktzspfx Aabon Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 3.114 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 7.100 mm, skupna višina: 2.800 mm, pritisk: 1.120 letvica, obratovalni tlak: 1.120 letvica, gorivo: dizel, skupna masa: 12.000 kg, največja hitrost vrtenja: 2.100 obr/min, kapaciteta rezervoarja za vodo: 1.600 l, lastna masa: 12.000 kg, moč: 286 kW (388,85 KM), leto zadnje generalne obnove: 2024, tlak vode: 1.120 letvica, zmogljivost črpalke: 111 l/min, Oprema: Na voljo je tipska ploščica, vrtilna hitrost brezstopenjsko nastavljiva, High-pressure pump unit Hammelmann HDP 233 mounted in a BDF / WAB container. Not Kamat, Uraca, or Woma, but similar. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Rjdswyw Dtepfx Aaben Operating pressure: 1120 bar Flow rate: 111 l/min. PRESSURE STAGE 2: Operating pressure: 920 bar Flow rate: 131 l/min. Equipped with switching valve / bypass valve and manual operation selector switch. Drive speed: 2100 rpm Plunger diameter: 30 mm Drive power: 230 kW Fitted with 286 kW Deutz BF 6M 1015 C diesel engine Includes workshop and changing room compartment. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (high-pressure pump from 2005) Operating hours: 3,114 Condition: New plunger seals, fuel and oil filters. High-pressure pump in very good used condition.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 350 letvica, pritisk: 350 letvica, gorivo: dizel, moč: 3 kW (4,08 KM), New High-Pressure Unit Are you also looking for a new high-pressure (HD) unit? We build them to your specifications. Here, we present our latest HD unit—this model is unique and a true all-rounder, offered in this configuration nowhere else on the market! Specifications VIHT2350/20/40/100 (demo) Rodsrnkgijpfx Aabsn • Engine: 30 kW at 1500 rpm / 36 kW at 1750 rpm • 2 x Mazzoni pumps, each delivering 21 liters per minute at 1450 rpm, set to 350 bar. Thanks to the low rpm, the engine runs quietly and smoothly. • Pressure regulation via rpm adjustment and manual setting with 2x Zero 350 valves; hoses are virtually pressureless (10 bar) when the trigger is closed. This allows safe operation, as hoses and pumps are almost pressureless, and only build up pressure when the trigger is opened. • 2 x burners for producing hot water up to 120°C. On request, V+ Steam is available, providing 140°C at the nozzle. • The machine allows two operators to work independently and simultaneously, with different temperatures and pressures. • The drive system has been specially developed for long service life and easy maintenance. • Equipped with 2 diesel tanks—1x 90 liters for the engine and 1x 90 liters for the burners. • The unit is designed for continuous 24/7 operation. • Includes 2 water tanks, 325 liters each—total 650 liters on board. • The Vibemo Easy Start panel offers protection against overheating and low oil level (engine shuts off), and provides alerts for malfunctions. It also features safeguards for low water level and open valve during operation. Additionally, it displays operating hours, rpm, and alternator charging current. • The temperature control is user-friendly and shows both the set and actual temperature. • As a standard extra, a 3-way valve is installed, enabling operation at 350 bar and 40 liters per minute (also with hot water up to 100°C). Suitable for applications like sewer or stable cleaning. • Also equipped with emergency stop, interior lighting in both the engine and reel compartments. • Reels and burners are made of high-grade stainless steel (RVS). All hoses are 50 meters long as standard. • Features a water pre-filter and intermediate filter for each pump. • Equipment includes: 2 handles with 2 flat jet lances (25 degrees, 20 liters), 2 turbo lances (20 liters), 1 flat jet lance (25 degrees, 40 liters), 1 turbo lance (40 liters), and 2 pressure gauges for reading the set pressure. • 3 gauges for monitoring diesel and water tank levels—for clear and organized oversight. • Everything is mounted on a tandem axle trailer (2,500 kg, dimensions LxWxH 300x150x150 cm). • Supplied with a 1-year warranty and a full-service package. Lead time: approximately 6 to 8 weeks. Photos are for reference and actual product may vary slightly.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating-up time: 8–15 min. (max. 80°C) Rjdpfx Asxm U Exsabsn Optional equipment: - Boxes on the booth roof - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: rabljeno, obratovalne ure: 20 h, Vrsta goriva: Dizel Redpfeuu Df Dex Aabsn

Leto izdelave: 2022, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz Rsdjhf Na Sepfx Aabsn CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor output: 11.2 kW (50Hz) / 13 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Supplied with standard accessories.

Leto izdelave: 2020, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), PTC CJ-1E High-Pressure Cleaner – similar but not Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner... - Operating pressure: 110 bar - Flow rate: 12 l/min Rjdpfx Aogcbzcsabon - Motor: Electric 4-pole, 230V, 2.2 kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Net weight: approx. 40 kg - High-pressure pump: Comet triple plunger pump with ceramic plungers - Durable injection-moulded plastic housing - Practical holder for gun with lance - Self-priming pump with EASY-START feature - Handle fitted with holders for power cable and high-pressure hose - Easy maintenance thanks to quick-release front cover - Large wheels (220 mm Ø) for easy transport on stairs and rough terrain - Pressure gauge (manometer) - Integrated professional unloader valve - Delayed Total-Stop system - Pulsation system - Rotary switch - Thermal motor protection - Manual stainless steel hose reel with 30 m 1/4" high-pressure hose - Two 1/4" F pipe cleaning nozzles - Spray gun with lance and fan-jet nozzle The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and clearing pipe blockages in pipes of 30 to 120 mm diameter. Equipped with a 2.2 kW, 230 V electric motor, it is suitable for use in apartments, homes, or commercial premises for sinks and toilets, as well as for garden and general cleaning tasks. The Comet LW-K pump with easy-start and pulsation function ensures maximum reliability and high cleaning performance. The CJ-1E can be used in both vertical and horizontal positions. The Total Stop function ensures the unit switches off when not in use. The robust plastic housing and large wheels provide maximum durability and optimal mobility across uneven surfaces.

Stanje: novo, Sheet width 1290 mm Sheet thickness 5 mm Pre-bending yes Roll diameter 120 mm Rolling speed 1–6 m/min Total power requirement 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, crowned rolls, adjustment of lower and bending roll via handwheel and worm gear, drive of upper and lower roll via worm gear motor, infinitely variable rolling speed by inverter, swiveling top roll. Swedish quality product. Rsdpfevzhgpjx Aabon This new machine is also available in the following sizes: Working length: from 1040 to 2540 mm Max. sheet thickness (400 N/mm²): from 1 to 6.5 mm Optional extras include: conical bending device (image 2), digital display (image 4), motorized adjustment (image 5) with remote control (image 3), and hardened rolls. Accessory prices + VAT: + Hardened and ground rolls = EUR 2,650 + Digital display per axis = EUR 1,050 + Conical bending device with diagonal adjustment of bending roll, sliding shoe and handwheel with display = EUR 1,500 + Motorized adjustment for adjustment roll = EUR 3,550 + Motorized adjustment for lower roll = EUR 3,550 STOCKING DEALER WITH 1,600 m² SHOWROOM.