KBK ukrivljeni kosi

Demag

Leto izdelave: 1992, Stanje: dober (rabljeno), Kompresorska postaja sestavljena iz: Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min 3.000 obr/min 45 kW Digitalni prikazovalnik Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min Tlak: 75 bar Ksdperi I Rrofx Abbswt 3.000 obr/min 45 kW Hladilni sušilnik stisnjenega zraka Proizvajalec: MANNESMANN DEMAG Tip: AD160AB Leto izdelave: 1993 Separator olje-voda Tip: ÖWAMAT 6 Rezervoar za stisnjen zrak Proizvajalec: LOHENNER Tip: ZU47/21 Prostornina: 5.000 l Izvedba: stoječa Leto izdelave: 1993 Nadtlak: 11 bar

Leto izdelave: 2021, Stanje: novo, Enoglavni rezalni stroj OMC GIOBI 600, nov Stroj na zalogi Ksdpjhrumasfx Abbjwt - Žagin list premera 600 mm - Hidro-pnevmatski pomik - Nagib pnevmatski na obe strani, z vnaprej določenimi koti 22,5° – 45° – 90°. Za vmesne kote mehanska ročna zaustavitev - 2 navpična in 2 vodoravna prijemala - Sistem mazanja žaginega lista z razprševanjem meglice - Popolna pnevmatska zaščita

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit Ksdpfxsx D Rqrs Abbowt • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm Kodpox D Nwqsfx Abbswt • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Kwedpfjfg E Hpsx Abbot Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Kwjdpfx Abeyark Tobet Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Kwodpfxsyarfdj Abbst Tip: Horizontalen Pogon: Hidravlični

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: sn. 816, dolžina podajanja os X: 2.600 mm, dolžina pomika po osi Y: 1.300 mm, skupna širina: 4.000 mm, skupna dolžina: 3.600 mm, skupna višina: 3.500 mm, trajanje garancije: 12 meseci, največja višina reza: 1.300 mm, zahteva za prostor dolžina: 4.200 mm, potrebna širina: 4.500 mm, potrebna višina: 3.600 mm, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers a brand-new automatic horizontal cutting machine for sale. Model: TYP PARK The machine features a robust and heavy-duty steel construction. Material cutting is carried out by the movement of the cutting frame along the X and Y axes, while the worktable remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear guides along the X-axis. In the Y-axis (vertical movement of the frame), feed is provided by two ball screws and linear guides. The machine offers single-sided and double-sided cutting modes as well as automatic cut correction during double-sided operation. Machine features: Kwjdpfxowq Dvds Abbet - Automatic, self-adjusting saw blade tensioning - Stationary table with a powered conveyor belt for easy material loading - Automatic cut length measurement - Quick-change system for the saw blade - Automatic material clamping Technical data: - Cutting width: 2100 mm - Cutting length: 2500 mm The machine is fully enclosed with a safety fence and equipped with safety light curtains in the loading and unloading area. As the manufacturer, we offer installation and service within the EU. The machine is CE-certified. Additionally, our range includes a variety of machines and systems for cutting foam and mineral wool. We invite you to get acquainted with our offer.

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. Kwjdpfjxcbnljx Abbot 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Front tire condition: 70% Ksdpfxowwqbyj Abbowt Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information.

Leto izdelave: 2020, Stanje: generalkompletno obnovljen (rabljeno), 2 semi-gantry cranes for indoor operation expandable to full gantry crane Kwedpfx Ajmdrt Sobbjt span approx. 8.5 m hook travel approx. 6.0 m DEMAG single-girder trolley floor control

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Kjdpfx Abjxykw Rebswt Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Kjdpfxjwk Aw Hs Abbjwt Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Leto izdelave: 2021, Stanje: novo, Enoglava rezalna žaga OMC RONDA 700, nova Stroj na zalogi - žagin list premera 700 mm Kodpehrukiofx Abbewt - hidro-pnevmatsko podajanje - pnevmatski nagib na obe strani, s fiksnimi kotnimi nastavitvami 22,5° - 45° - 90°. Za vmesne kote z ročnim mehanskim omejilcem - 2 navpična in 2 vodoravna prijemala - sistem mazanja lista s pršilno meglico - popolna pnevmatska zaščita

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, DEMAG DVOJNOSEŽNI MOSTNI ŽERJAVI, LETO 1998, Z DVIŽNIM MEHANIZMOM. DOLŽINA NOSILCA: 28.200 mm. VIŠINA POD NOSILCEM: 11 METROV. DELOVNI. DOKUMENTACIJA IN VZDRŽEVALNA DOSJEJA NA VOLJO. Kjdpfx Ajyb Tt Sjbbswt