Brusilni stroj

DECKEL LKD

Stanje: rabljeno, CNC Travelling Column Boring and Milling Machine ANAYAK Type HVM-3800-P Bed Type Milling Machine, design similar to a plate boring machine with fixed table Machine No.: M-20021203 Year of Manufacture: 2002 "Refurbished 2025" The machine will be workshop-refurbished in 2025 and can then be inspected at our warehouse in 37235 Hessisch Lichtenau. Travels: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 x 22 mm, spacing 130 mm Table load max. 25 t (stationary table – almost unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (pull stud DIN 69872-B) Spindle speed: 60–4000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic 30-position tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydromechanical tool clamping - Orthogonal milling head can be fully automatically swivelled in two 45° planes – B+C axis - Control: HEIDENHAIN iTNC 530, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – can be mounted - Free-standing control cabinet - Chip conveyor mounted between travelling column bed and machine table - 32,078 operating hours read - Coolant system - Freestanding hydraulic unit - Operating manual with circuit diagrams Isdpfxexcgtgs Ah Asik Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 t Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with Rotary Table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: - C98 control system with BP26_SE operator panel - VAST GOLD sensor system - 13-position probe changer magazine - Probe change plate - Probe accessories - Calibration sphere - Reference probe - Workstation with monitor - Calypso Basic 5.2 software Iiedovdtzdopfx Ah Aek - Upgrade to current Calypso version and additional options possible - Complete retrofit with C99 and current Calypso version possible - Available at short notice

Stanje: rabljeno, Leto izdelave: 1970, x-travel: 900 mm y-travel: 250 mm Iedpfx Ajcxxqroh Aeik z-travel: 370 mm Table clamping surface: 1525 x 325 mm Total power requirement: 9.85 kW Machine weight approx.: 3.1 t Space requirement approx.: 2.0 x 2.5 x 1.7 m

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Equipment The machine can be upgraded with new software and control system according to customer requirements. Measuring range X = 850 mm Y = 1200 mm Z = 600 mm Measuring accuracy 2.5µ + L/250 Price: on request! We will be happy to provide you with a detailed quotation! Iisdsff Eakspfx Ah Aok Note: Our offer is intended exclusively for professional customers. (Subject to technical changes, errors and prior sale!)

Stanje: dober (rabljeno), HAAS tool grinding machine Good condition, fully functional, can be inspected and tested on site. Iedev Nw Rtjpfx Ah Ajik Shipping also available abroad. Inspection: As a general note, to avoid misunderstandings, I would like to point out that the item can be viewed and tested under power before purchase. Please ask any questions prior to buying to avoid any ambiguities. For general inquiries or to arrange an inspection appointment, I can be reached at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Ijdpfxeuuz Iio Ah Aoik Year of manufacture: 2011 Charmilles Millenium control system Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Stanje: rabljeno, Leto izdelave: 2005, Splošne informacije: - Model: ROBODRILL α-T2 STAMA - Serijska številka: 046VH155 - Leto izdelave: 2005 - CNC krmilnik: FANUC (model A04B-0094-B111#BD) - Teža: 2.200 kg - Napajanje: 200 V, 50/60 Hz, trifazno - Priključna moč: 10 kVA ----- Obdelovalne zmogljivosti: - Operacije: - Rezkanje (visokohitrostno in zelo natančno rezkanje) Iijdpfxjuru I Rj Ah Ajk - Vrtanje - Tog navojni rez (rigid tapping) ----- Hodi osi: - Premik X-osi: ~500 mm - Premik Y-osi: ~400 mm - Premik Z-osi: ~330 mm ----- Vreteno: - Konus vretena: BT30 - Standardna hitrost vretena: do 10.000 min⁻¹ (vrt./min) ----- Menjalec orodij: - Tip: avtomatski menjalec orodij - Čas menjave orodja: ~1,6 sekunde ----- Hitro pomikanje: - Hitrost hitrega pomika: 54 m/min na oseh X, Y in Z ----- Ključne lastnosti: - Kompaktna struktura za visoko togost - Visoka produktivnost z izjemno hitrimi cikli vrtanja in navojev - Enostavno vzdrževanje (integriran FANUC diagnostični vmesnik) - Združljivost z avtomatiziranimi proizvodnimi celicami (so-označevanje s STAMA)

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm Iiodpowl An Isfx Ah Aek X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. Iedpfx Asf Sqckjh Aeik High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.