Rezkalni stroj

DECKEL Fräsmaschine Deckel FP3 / 4A-TC

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: Dodpfx Ajrqwbioplekl ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružniška klop, stružnica z vodilno in pogonsko vreteno, stružnica z vodilno in pogonsko vreteno -Proizvajalec: Strunguri Arad, stružnica z vodilno in pogonsko vreteno tip SNA560x2000 -Dolžina struženja: 2140 mm -Premer struženja nad posteljo: 600 mm Djdpfxeyaypkj Aplekl -Premer struženja nad suportom: 330 mm -Vrtina vretena: Ø 65 mm -Število vrtljajev vretena: 16 - 1600 o/min -Tro-čeljustna glava: Ø 310 mm -Ležišče konjička: MK5 -Pogonski motor: 11 kW -Dodatki: vključeni, glej fotografije -Dimenzije: 3700/1050/H1400 mm -Teža: 3600 kg

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm Dkedpfxstqqmhs Aplel z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Machine weight approx. 2.0 t Djdpfx Aetqqllopljkl Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system - X/Y/Z axes can also be operated via handwheels -

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Djdpfx Ajw Rkt Ieplskl Dolžina struženja: 2000 mm Višina konic nad suportom: 300 mm Razdalja med konicami: 1600 mm Hitrosti vrtenja: 3 - 2.500 vrt/min Vpenjalni konus lunete: MK 5 Premer izvrtine glavnega vretena: 62 mm Hod pinole: 190 mm Vzdolžni pomiki: pribl. 0,001-10 nastavljivo mm/obrat Prečni pomiki: pribl. 0,001-5 nastavljivo mm/obrat Hitri pomik X-os: do 5000 m/min. Skupna potrebna moč: 40 KVA Teža stroja pribl.: 5,6 t Dimenzije stroja pribl. DxŠxV: 4,0 x 2,0 x 1,9 m Vključno z dodatno opremo, glej fotografijo

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Dksdpfjh Hvk Aex Aplel Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LZ280/3, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 43 mm, premer struženja: 330 mm, premer struženja nad ležiščem sani: 330 mm, višina središča: 165 mm, stružna dolžina: 670 mm, poteza s peresom: 90 mm, premer tulec: 45 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, GDW Precision Lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed screw lathe with stepless speed control ranging from 30 to 4000 rpm. The standard paintwork includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Features & Accessories: ✅ 3-axis position display with 6" colour screen ✅ Multifix A quick-change toolpost, including one turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & K32 collet rack ✅ Electromechanical cut-off device for threading/feed ✅ Tool cabinet with telescopic slide-out, including operating tools Additional Equipment Package (optional): ➕ 3-jaw chuck Ø 160 mm (up to 4600 rpm) Dkedpfx Asv Dan Doplol ➕ Quick-action drill chuck (3-16 mm, B16/MK3) ➕ Live centre MK3 & boring tool holder ➕ 4 additional turning tool holders & 1 boring tool holder 📦 Delivery: ✔️ Disposable packaging & secure transport including insurance Perfect for precise and demanding turning operations in industrial and craft applications! 🚀

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY Dedpsuha Umsfx Aplekl - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Machining center Manufacturer: KNUTH Dodjtiauhopfx Aplokl Model: EcoMill 350 CNC

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Dodpfx Aotv H Ucspljkl Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 - 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total power consumption: 35 KVA Machine weight: approx. 10 t Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault.