Orodni rezkalni stroj/DECKEL FP 2

DECKEL FP 2

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 2300-0053, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, največja hitrost vrtenja: 2.000 obr/min, skupna masa: 1.000 kg, Brez najmanjše cene – prodaja zagotovljena najboljšemu ponudniku! Vložitev ponudbe zavezuje k pravočasnemu prevzemu, ki mora biti izveden bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! Hedpfoym Nwdox Ab Ejfd TEHNIČNE PODROBNOSTI Hod v osi X: 500 mm Hod v osi Y: 400 mm Hod v osi Z: 300 mm Hitrost vrtenja: 40 – 2.000 vrt/min Dimenzije mize: 1.000 x 520 mm Število utorov na mizi: 6 PODROBNOSTI STROJA Dimenzije & teža Dimenzije (D x Š x V): 1.800 x 1.500 x 1.900 mm Teža: 1.000 kg OPREMA Nagibna miza Trio-sni digitalni prikazovalnik (Heidenhain) Nove zložljive harmonike Nove ročice Zunanja referenca: Oberthür

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: ročni, delovna širina: 1.270 mm, nastavitev pregibne grede: 46 mm, Kot upogiba (maks.): 135 °, najv. debelina pločevine: 2 mm, nastavitev zadnjega prislona: ročni, zadnji prislon: 760 mm, skupna masa: 380 kg, skupna dolžina: 1.600 mm, skupna širina: 850 mm, skupna višina: 1.175 mm, Oprema: dokumentacija / priročnik, Upper and lower knife in removable segments Including manual back gauge Hfsdpoga T A Iofx Ab Esd PNEUMATIC CYLINDER!!! Max. bending capacity over the full working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm

Stanje: pripravljen za uporabo (rabljen), Orodjarska rezkalna stroj DECKEL FP 2E iz izobraževalne ustanove -Pomiki X / Y / Z 400x200x400mm -Avtomatski podajalniki + hitri pomik na oseh X/Z -Območje vrtljajev 40 - 2000 obr./min -Orodno držalo ISO 40 -Vertikalna / horizontalna rezkalna naprava -Zasukljiva vertikalna glava z vrtalno pinolo -Stroj s pomično glavo / razširljiv pomik Y -Nov elektro omarica -Oprema za hlajenje -Pladenj za ostružke -Dokumentacija Mere (DxŠxV): 1,5x1,6x1,8 metra / Teža 1500 kg Hodpfsypltaex Ab Ejfd Možne napake in tipkarske napake so pridržane

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2836-0192, Stroj v dobrem rabljenem stanju, Krmiljenje Dialog 11 Do pred kratkim je bil redko v uporabi v lastni delavnici. Hfsdpfx Absylawxo Eod Dokumentacija/priročniki itd. so na voljo. Dodatna oprema, rezkarji, ničelne sonde itd. se lahko dokupi opcijsko.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes Hjdpfx Absu Nvxmj Eofd >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: dober (rabljeno), Deckel CNC rezkalni stroj Krmiljenje Mere in teža: Teža: cca 1,3 t - 1,5 t. Dimenzije: cca D x Š x V 1,5 m x 1,5 m x 1,6 m Stroj ima mehanske ročice za ročno upravljanje, kljub CNC krmiljenju Hfsdjynf E Tjpfx Ab Ejd Krmiljenje: DECKEL Dialog 4 (6004 50 004602 02) Šolski stroj Podatki so bili odčitani s stroja, zato brez garancije

Leto izdelave: 1968, stanje: dober (rabljeno), For sale is a Deckel milling machine from the year 1968. The machine is in good to very good condition and fully functional. (No digital readout, but can be added upon request) Technical data: - Tool holder: SK 40 - Travel X/Y/Z: 400 / 200 / 400 mm - Speed range: 40 - 2000 rpm - Vertical spindle travel: 60 mm Hfedpeihf Etsfx Ab Eod - Horizontal spindle travel: 100 mm - Feeds: 8 - 400 mm/rev - Table size: 700 x 330 mm - Motor power: 2.2 kW - Connection: 400 V / 16 A plug - Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 Hfjdpfx Aovb Ud Ujb Eed >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 400 mm, For sale is a conventional milling machine by Deckel, model FP2. The machine is in excellent condition, was overhauled by Harich (date unknown), and is ready for immediate use. Technical specifications: Toolholder: SK 40 Travels X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Hfsdpfx Aeu Ti Akob Eod Horizontal spindle travel: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg Vise and tools are NOT included in the offer but can be supplied upon request. Transport and loading can be organized across Europe for an additional charge, if required. Prices plus VAT. Inspection possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 680 mm, širina mize: 380 mm, višina mize: 345 mm,

Stanje: dober (rabljeno), For sale is a Deckel FP2 with rapid traverse milling head (V-belt drive with gear ratio). The machine was only used for copper and graphite machining, and therefore has not been heavily used. The machine is ready for immediate operation and fully functional. Hjdpjlz R Iwofx Ab Eofd Retrofitting with a digital readout is possible for an additional charge. The machine can also be sold without the milling head. Dividing head NOT included. Accessories available at extra cost. Tool holder: SK 40 Travel (X/Y/Z): 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine Trade – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: rabljeno, skupna višina: 16.000 mm, skupna širina: 1.100 mm, skupna dolžina: 1.500 mm, Net weight: 1,000 kg Milling machine, milling bench Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400 x 270 x 400 mm Speed: 40-2,000 rpm Table size: 700 x 330 mm Taper: ISO40 Spindle motor power: 2.2 kW Overall dimensions: 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Power [kW]: 2.2 - Travel X-axis [mm]: 400 - Travel Y-axis [mm]: 270 - Travel Z-axis [mm]: 400 Hfsdpsx S Eayjfx Ab Eed - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Transport dimensions: 1,500 x 1,100 x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial information: VAT: The quoted price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Orodjarski rezkalni stroj DECKEL FP 2 LB z 3-osnim digitalnim prikazom (ACU-RITE) -Pomiki X/Y/Z: 795x300x400mm -Avtomatski vzdolžni / prečni / planirani pomiki -Hitri pomiki na vseh treh oseh -Miza za vpenjanje: 1000x440mm -3-osni digitalni prikaz (ACU-RITE) -Število vrtljajev vretena: 40 - 2000 obr/min -Horizontalna / vertikalna rezkalna naprava -Orodno vpenjalo ISO 40 -Nagibna navpična glava z vrtalno pinolo -Oprema za hlajenje -Strojna svetilka -Razni nosilci za orodje -Strojna dokumentacija Mere: D x Š x V 2,5x2,3x1,8 metra / Teža 2200 kg Hodpfoylba Uox Ab Eefd Pridržujemo si pravico do napak in tipkarskih zmot.