Hladilnik

DAIKIN Air Cooled Chiller

Leto izdelave: 2021, stanje: zelo dobro (rabljeno),

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Dedpjd Tiu Eefx Aplocg Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Dsdpou Rptyofx Aplecg Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: rabljeno, Leto izdelave: 2004, Suhi v epoksi smoli zalit distribucijski trifazni transformator, proizvajalec TESAR Italija, leto izdelave 2004, moč 1600 kVA, razmerje napetosti 20(2x±2,5%)/0,4kV, AN-AF (prisilno hlajenje, trajno preobremenitev 30%), Dyn11, uk=6%, IP00, standardne izgube, funkcionalen, popolna dokumentacija in kosovni protokol, skupno 2 kosa. Dodpswpb Emefx Aplecg

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Unit Model: HSK 6461-60-40P (x3) Flow rate: 165 m³/h (each) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant receiver included Stock status: 2 units available Stock number: Z77 Condition: Used Dcjdpfxstqcqaj Apleg

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Dcjdpsqabiaefx Aplsg Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Leto izdelave: 2018, stanje: rabljeno, Ledeni stroj Dcsdjwp R Rlopfx Aplog Proizvajalec: Ice Systems (UK) Model: F2AS Letnik izdelave: 2018 Proizvaja luskasti led Zmogljivost: nazivno 2 t/24 h S stojalom, v omari Krmiljenje preko zaslona na dotik

Leto izdelave: 2022, stanje: novo, 20 nowych pojemników typu tote Dcodeh N D Efspfx Apleg Pojemność: 200 litrów Całkowicie ze stali nierdzewnej

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces Dcodpeg Ezarefx Aplsg - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.