LPG viličarji

Daewoo G 45 SC-2 *defekt*

Stanje: dober (rabljeno), HYDRAULIC PRESS BRAKE BYSTRONIC, 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST RETURN STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Y1 Y2: hydraulic cylinder axes. X axis: backgauge forward and backward movement. R axis: backgauge vertical movement (up and down). Isdpfx Afsvxipgs Teht Z1 and Z2 axes: backgauge stops movement to the right and left. X1 or relative X: single stop forward and backward movement. 7 axes total. The control unit also manages hydraulic crowning, which can be considered the eighth axis.

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: Iedpfx Asu Nc Emsf Toht X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Iedpfx Afod Sitko Tsht Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: rabljeno, A.COSTA LEOPARD večlistna krožna žaga z dvojnim vretenom Iodpfx Afjvf Dags Tsht - Največja globina reza: 200 mm - Širina podajalne mize: 350 mm - 2 x 55 kW / 75 KM - Teža: približno 5 ton

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h Ihsdpew Rl S Sefx Af Tst X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: dober (rabljeno), Tračna žaga linija za velike hlode 1. Transporter za hlode 2. Vmesna skladiščna miza za hlode s podajalnikom za posamezne kose 3. Transporter za hlode z usmerjanjem in centriranjem, vključno z obračalnikom 4. Söderhamn AKE 245A dvostranska reducirna tračna žaga (ARI z 6-rezilnimi glavami) 5. Odbiralnik desk z obračalnikom blokov 6. Bočni prenos blokov 7. Dovod blokov 8. ARI BKR-600 9. ARI DS-75 večlistna žaga 10. Obrezovalna linija z ARI KT-52 obrezovalno žago Cena: 2.100.000 SEK, v obstoječem stanju na lokaciji. Linija je popolna, vendar niso vsi transporterji v pritličju. Vključen je sekalnik Bruks 1503M. Električne omare niso pod napetostjo (ni PLC programske opreme). Demontažo in nakladanje lahko izvede UJ Trading AB. Ijdpfxjikvlij Af Toht Žaga se nahaja na Švedskem.

Leto izdelave: 1996, Stanje: zelo dobro (rabljeno), Uporabljena, zelo čista in dobro vzdrževana hidravlična CNC upogibna stiskalnica serije Trumpf V naprodaj Trumpf V85, 2 metra x 85 ton – 4-osna CNC upogibna stiskalnica v dobrem stanju – video na dnu oglasa Proizvajalec: Trumpf Model: Trumabend V85 Leto izdelave: 1996 Največja pritrdilna sila: 850 kN / 85 ton Največji hod: 215 mm Čas zaviranja: 79 ms Skupno osi: 2-osi zadnjega vodila / skupno število osi 4 – y1, y2, x, r in i os Komplet vključuje: • Prost prehod (daylight): 390 mm • 2-osno zadnje vodilo Isdpfxji Igi Se Af Toht • i-os – spodnja osnova se premika za uporabo dvojnega multi V brez potrebe po ročnem prestavljanju ali menjanju orodja • V celoti servisirana / Dobro ohranjena

Leto izdelave: 1997, Stanje: rabljeno, Cena: na vprašanje - Leto izdelave: 1997 - Dokumentacija na voljo: da - CE oznaka prisotna: da - CE certifikat na voljo: ne - Krmiljenje: CNC - Znamka krmilnega sistema: Heidenhain - Število osi [kos]: 5 Isdpfx Ajwh Shvjf Teht - Pomik X-osi [mm]: 1200 - Pomik Y-osi [mm]: 880 - Pomik Z-osi [mm]: 800 - Dolžina mize [mm]: 5000 - Vpenjalo orodja: SK40 - Največje število vrtljajev vretena [vrt/min]: 18.000 - Možnosti: digitalni prikaz - Tip digitalnega prikaza: Heidenhain Finančne informacije DDV: Navedena cena je brez DDV DDV/obrnjena obdavčitev: DDV je za podjetja odbiten Dostava in odkupi možni kadar koli za vse iz industrijskega področja Lukas van Rossum

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), SMS MEER CNC DVOJSTRANSKI POSNEMALNI STROJ Ihodpfxsghrguo Af Tet Proizvajalec: SMS MEER Tip: RFA 14 Leto izdelave: 2000 Delovno območje: cev Ø 21,3 – 114,3 mm Debelina stene: 2,3 – 11 mm Dolžina: 6–12 m Sestavljen iz dveh posnemalnih strojev RFA14 z transportnimi napravami med stroji. Namen strojev je posnemanje notranje in zunanje strani na obeh koncih cevi. Območje premera posnemanih cevi je 21,3–114,3 mm, debelina sten 2,3–11 mm, v dolžinskem razponu 6–12 m. Naloga transportnih naprav v območju posnemalnih strojev je prevzemanje cevi z valjčne proge in njihov prenos med posnemalnimi stroji.

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: Ihedpfx Aewwl Iusf Tet --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg