Stroj za čiščenje

DÜRR ECOCLEAN Jeto 84W

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel. Iaodpfxsfz Nako Af Tsl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Iaedpfxovtancj Af Tsl

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing Iaedpfxsul Efmj Af Tsl device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Iasdjuhaqbspfx Af Tol

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Iaodpfx Aev Scrbjf Tel

Stanje: rabljeno, Leto izdelave: 2008, Premer kolesa - maks. 300 mm Modul - maks. 8 Modul - min. 0,7 Krmiljenje SINUMERIK 840 D Kot delnega stožca - min./maks. - 90 / + 90 ° Vreteno delovnega predmeta - izvrtina 127 mm Premer brusnega kolesa 50 - 230 mm Število vrtljajev brusnega vretena brezstopenjsko 7.500 U/min Ijdpfx Afsvxww Se Tjal Število vrtljajev vretena obdelovanca 700 U/min Skupna potrebna moč 146 kW Teža stroja pribl. 21 t Prostorska zahteva pribl. 9,5 x 3,6 x 3,1 m Merilna sonda za zobno režo (integrirana v brusno glavo) Zunanja brusilna vretena - naprava za hlajenje Odsesavanje oljne megle ELBARON (integrirano v stroju) Filtrirni sistem hladilnega sredstva Hoffmann Uporabljalo se je za serijsko proizvodnjo spiralno zobatih krožnih zobnikov Brez vpenjalnih sredstev Brez brusnih koles / prirobnic za brusna kolesa Brez diamantnih rezil

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, nosilnost: 180 kg, doseg roke: 2.900 mm, We at Binici MB GmbH have additional industrial robots available in-house. Iasdowxxzwjpfx Af Tel All of our robots are fully operational and come with complete accessories. We are happy to provide you with expert advice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Iodpfswf I Rzsx Af Tjal Operating hours: 14,100 h Incl. various accessories

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: Iasdporairwsfx Af Tel X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Iajdpfjg Ufvbex Af Tjl Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!